Abstract The work presented in this paper details the development of a finite element (FE) model of a soccer ball, allowing for a greater understanding of the performance of soccer balls under dynamic conditions that are representative of play. The model consists of composite shell elements that include a hyperelastic strain energy potential equation to define the latex bladder layer and a plane stress orthotropic elastic material model to define the anisotropic woven fabric outer panels. The model was validated through a series of experimental impact tests whereby the ball was impacted normal to a rigid plate at an inbound velocity of approximately 34 ms −1 (76 mph), with each impact recorded using high speed video (HSV) techniques. It was found that the combined effects of ball design and panel material anisotropy resulted in impact properties such as coefficient of restitution, contact time, deformation and the 2D shape taken up by the ball at maximum deformation, to vary with pre-impact ball orientation. The model showed good agreement with the measurements, and its ability to represent the effects of anisotropy in ball design.
[1]
B. Durand,et al.
Fabric thickness dynamic measurement during a classic uniaxial tensile test
,
2002
.
[2]
Paul J. Neilson.
The dynamic testing of soccer balls
,
2003
.
[3]
Andrew C. Long,et al.
Effects of fibre architecture on reinforcement fabric deformation
,
2002
.
[4]
Jian Cao,et al.
A non-orthogonal constitutive model for characterizing woven composites
,
2003
.
[5]
R. Postle,et al.
On the Poisson's ratios of a woven fabric
,
2005
.
[6]
Steve Haake,et al.
The physics of football
,
1998
.
[7]
Grant P. Steven,et al.
Modelling for predicting the mechanical properties of textile composites : A review
,
1997
.
[8]
Ronald C. Averill,et al.
Finite element analysis of textile composite preform stamping
,
2001
.
[9]
Philippe Boisse,et al.
Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests
,
2000
.
[10]
A. Mouritz,et al.
Tensile extension properties and deformation mechanisms of multiaxial non-crimp fabrics
,
2004
.