The development of an integrated and intelligent CAD/CAPP/CAFP environment using logic-based reasoning

Abstract The integration of design and manufacturing poses to the researchers in the fields of cad , cam and cim a series of challenges. This paper introduces a methodology and a prototype system that allows for the integration of product design with manufacturing process planning. The task is achieved through an intelligent cad - capp - cafp environment where a designed model from the cad system can be analysed, and manufacturing process plans with specifications of machining and fixturing methods can be automatically determined. The manufacturing information of a part required for process and fixture planning is extracted from the 3D geometric model and the 2D engineering drawing, thereby both geometric and non-geometric attributes of a part can be obtained. An integrated approach to process and fixture planning is adopted to ensure that the process plan for a machined part is generated on the basis of a workable fixture plan. The overall integration is achieved through the underlying unified logical representation.

[1]  Barbara Hayes-Roth,et al.  A Blackboard Architecture for Control , 1985, Artif. Intell..

[2]  Basuki Nugroho Soetarman.  A logic-based reasoning system for computer-integrated manufacturing , 1990 .

[3]  Brian S. Thompson,et al.  Automated design of modular fixtures for flexible manufacturing systems , 1986 .

[4]  C. R. Liu,et al.  Generation of workpiece orientations for machining using a rule-based system , 1988 .

[5]  Andrew Y. C. Nee,et al.  Expert fixture-design system for an automated manufacturing environment , 1992, Comput. Aided Des..

[6]  Bernard Roth,et al.  An Extension of Screw Theory , 1981 .

[7]  Stelios Kafandaris,et al.  Expert Process Planning for Manufacturing , 1990 .

[8]  William F. Clocksin,et al.  Programming in Prolog , 1981, Springer Berlin Heidelberg.

[9]  Nan-Rong Chen.  Feature-based numerical control program generation from computer-aided design models , 1990 .

[10]  K F Gill,et al.  Expert system rules for fixture design , 1990 .

[11]  Pappu L. N. Murthy,et al.  Winter Annual Meeting of ASME , 1992 .

[12]  K. J. Chang.  Knowledge-based process planning for machining parts , 1990 .

[13]  C. Barus.  A treatise on the theory of screws , 1998 .

[14]  Inyong Ham,et al.  Computer-Aided Process Planning: The Present and the Future , 1988 .

[15]  Alan H. Bond,et al.  Integrating prolog and CADAM to produce an intelligent CAD system , 1990, Softw. Pract. Exp..

[16]  B. Dizioglu,et al.  Mechanics of form closure , 1984 .

[17]  H. P Nii,et al.  Blackboard Systems , 1986 .