Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%

[1]  Fujun Zhang,et al.  Semitransparent polymer solar cells with 12.37% efficiency and 18.6% average visible transmittance. , 2020, Science bulletin.

[2]  Fujun Zhang,et al.  Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator , 2019, Science China Chemistry.

[3]  B. Liu,et al.  A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency , 2019, Energy & Environmental Science.

[4]  Han Young Woo,et al.  Realizing high-efficiency Multiple blend polymer solar cells via a unique parallel-series working mechanism , 2019, Journal of Materials Chemistry A.

[5]  Xiaodong Cao,et al.  An Alcohol-Soluble Polymer Electron Transport Layer Based on Perylene Diimide Derivatives for Polymer Solar Cells , 2019, IEEE Journal of Photovoltaics.

[6]  Weiwei Li,et al.  Crystalline Cooperativity of Donor and Acceptor Segments in Double-Cable Conjugated Polymers toward Efficient Single-Component Organic Solar Cells. , 2019, Angewandte Chemie.

[7]  B. Liu,et al.  A Narrow‐Bandgap n‐Type Polymer Semiconductor Enabling Efficient All‐Polymer Solar Cells , 2019, Advanced materials.

[8]  Yufei Wang,et al.  Self-doping n-type polymer as a cathode interface layer enables efficient organic solar cells by increasing built-in electric field and boosting interface contact , 2019, Journal of Materials Chemistry C.

[9]  X. Zhan,et al.  Facile synthesis of high-performance nonfullerene acceptor isomers via a one stone two birds strategy , 2019, Journal of Materials Chemistry A.

[10]  Yongfang Li,et al.  Thioether Bond Modification Enables Boosted Photovoltaic Performance of Non-Fullerene Polymer Solar Cells. , 2019, ACS applied materials & interfaces.

[11]  J. Yao,et al.  A nonfullerene acceptor with a 1000 nm absorption edge enables ternary organic solar cells with improved optical and morphological properties and efficiencies over 15% , 2019, Energy & Environmental Science.

[12]  Yongsheng Chen,et al.  Efficient and thermally stable organic solar cells based on small molecule donor and polymer acceptor , 2019, Nature Communications.

[13]  Zhishan Bo,et al.  High‐Efficiency As‐Cast Organic Solar Cells Based on Acceptors with Steric Hindrance Induced Planar Terminal Group , 2019, Advanced Energy Materials.

[14]  Yufei Wang,et al.  The comprehensive utilization of the synergistic effect of fullerene and non-fullerene acceptors to achieve highly efficient polymer solar cells , 2019, Journal of Materials Chemistry A.

[15]  Wei Ma,et al.  Single‐Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy , 2019, Advanced materials.

[16]  Yongfang Li,et al.  Overcoming the energy loss in asymmetrical non-fullerene acceptor-based polymer solar cells by halogenation of polymer donors , 2019, Journal of Materials Chemistry A.

[17]  F. Gao,et al.  Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages , 2019, Nature Communications.

[18]  Fujun Zhang,et al.  Ternary polymer solar cells with alloyed donor achieving 14.13% efficiency and 78.4% fill factor , 2019, Nano Energy.

[19]  Hongzheng Chen,et al.  Simple non-fused electron acceptors for efficient and stable organic solar cells , 2019, Nature Communications.

[20]  C. Zhong,et al.  Unconjugated Side‐Chain Engineering Enables Small Molecular Acceptors for Highly Efficient Non‐Fullerene Organic Solar Cells: Insights into the Fine‐Tuning of Acceptor Properties and Micromorphology , 2019, Advanced Functional Materials.

[21]  W. Gao,et al.  A High‐Performance Non‐Fullerene Acceptor Compatible with Polymers with Different Bandgaps for Efficient Organic Solar Cells , 2019, Solar RRL.

[22]  Yongfang Li,et al.  11.2% Efficiency all-polymer solar cells with high open-circuit voltage , 2019, Science China Chemistry.

[23]  Jacek Ulanski,et al.  Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core , 2019, Joule.

[24]  H. Yan,et al.  Achieving high efficiency and low voltage loss simultaneously for non-fullerene organic solar cells , 2019, Science China Chemistry.

[25]  Xiangwei Zhu,et al.  Constructing High‐Performance All‐Small‐Molecule Ternary Solar Cells with the Same Third Component but Different Mechanisms for Fullerene and Non‐fullerene Systems , 2019, Advanced Energy Materials.

[26]  He Yan,et al.  Reduced Energy Loss Enabled by a Chlorinated Thiophene‐Fused Ending‐Group Small Molecular Acceptor for Efficient Nonfullerene Organic Solar Cells with 13.6% Efficiency , 2019, Advanced Energy Materials.

[27]  S. Beaupré,et al.  Fused Benzothiadiazole: A Building Block for n‐Type Organic Acceptor to Achieve High‐Performance Organic Solar Cells , 2019, Advanced materials.

[28]  Wenkai Zhong,et al.  Achieving over 16% efficiency for single-junction organic solar cells , 2019, Science China Chemistry.

[29]  Hongzheng Chen.  Electron-deficient core fused-ring based non-Fullerene acceptor enables over 15% efficiency in single junction organic solar cells , 2019, Science China Chemistry.

[30]  Yongqian Shi,et al.  High‐Performance All‐Polymer Solar Cells Enabled by an n‐Type Polymer Based on a Fluorinated Imide‐Functionalized Arene , 2019, Advanced materials.

[31]  C. Zhong,et al.  Achieving Balanced Charge Transport and Favorable Blend Morphology in Non-Fullerene Solar Cells via Acceptor End Group Modification , 2019, Chemistry of Materials.

[32]  F. Huang,et al.  High‐Performance Large‐Area Organic Solar Cells Enabled by Sequential Bilayer Processing via Nonhalogenated Solvents , 2018, Advanced Energy Materials.

[33]  Yongfang Li,et al.  Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors , 2018 .

[34]  Yong Cao,et al.  Organic and solution-processed tandem solar cells with 17.3% efficiency , 2018, Science.

[35]  Feng Liu,et al.  High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors , 2018, Nature Energy.

[36]  X. Zhan,et al.  Enhancing the performance of non-fullerene organic solar cells via end group engineering of fused-ring electron acceptors , 2018 .

[37]  Yang Yang,et al.  Next-generation organic photovoltaics based on non-fullerene acceptors , 2018 .

[38]  Guodong Zhou,et al.  Hidden Structure Ordering Along Backbone of Fused‐Ring Electron Acceptors Enhanced by Ternary Bulk Heterojunction , 2018, Advanced materials.

[39]  He Yan,et al.  Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors , 2018, Nature Energy.

[40]  F. Liu,et al.  Optimized Fibril Network Morphology by Precise Side‐Chain Engineering to Achieve High‐Performance Bulk‐Heterojunction Organic Solar Cells , 2018, Advanced materials.

[41]  Jie Zhu,et al.  Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small‐Molecule Acceptors , 2018, Advanced materials.

[42]  Fei Huang,et al.  Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells. , 2018, Chemical reviews.

[43]  F. Liu,et al.  Fine‐Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54% , 2018, Advanced materials.

[44]  Seth R. Marder,et al.  Non-fullerene acceptors for organic solar cells , 2018 .

[45]  Yongfang Li,et al.  High‐Performance As‐Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency , 2018, Advanced materials.

[46]  Yongfang Li,et al.  Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency , 2018, Science China Chemistry.

[47]  Feng Gao,et al.  Organic solar cells based on non-fullerene acceptors. , 2018, Nature materials.

[48]  W. Choy,et al.  Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance , 2017, Advanced materials.

[49]  H. Yao,et al.  Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell. , 2017, Journal of the American Chemical Society.

[50]  Xiao-Fang Jiang,et al.  High-Performance Ternary Organic Solar Cell Enabled by a Thick Active Layer Containing a Liquid Crystalline Small Molecule Donor. , 2017, Journal of the American Chemical Society.

[51]  Ke Gao,et al.  Solution-processed organic tandem solar cells with power conversion efficiencies >12% , 2016, Nature Photonics.

[52]  F. Liu,et al.  Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10% , 2016, Advanced materials.

[53]  I. McCulloch,et al.  Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6ee02598f Click here for additional data file. , 2016, Energy & environmental science.

[54]  D. H. Wang,et al.  Water Splitting Progress in Tandem Devices: Moving Photolysis beyond Electrolysis , 2016 .

[55]  Fujun Zhang,et al.  Versatile ternary organic solar cells: a critical review , 2016 .

[56]  A. Heeger,et al.  High-Performance Solution-Processed Non-Fullerene Organic Solar Cells Based on Selenophene-Containing Perylene Bisimide Acceptor. , 2016, Journal of the American Chemical Society.

[57]  H. Ade,et al.  A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance , 2015, Advanced materials.

[58]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[59]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[60]  Yang Yang,et al.  Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer , 2012, Nature Photonics.

[61]  Markus Hösel,et al.  Roll-to-roll fabrication of polymer solar cells , 2012 .

[62]  Lei Zhang,et al.  Energy losing rate and open-circuit voltage analysis of organic solar cells based on detailed photocurrent simulation , 2009 .

[63]  L. Jay Guo,et al.  Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes , 2008 .