Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication

Inkjet printing of functional materials is a key technology toward ultra-low-cost, large-area electronics. We demonstrate low-temperature 3D micro metal structure fabrication by direct inkjet printing of metal nanoparticles (NPs) as a versatile, direct 3D metal structuring approach representing an alternative to conventional vacuum deposition and photolithographic methods. Metal NP ink was inkjet-printed to exploit the large melting temperature drop of the nanomaterial and the ease of the NP ink formulation. Parametric studies on the basic conditions for stable 3D inkjet printing of NP ink were carried out. Furthermore, diverse 3D metal microstructures, including micro metal pillar arrays, helices, zigzag and micro bridges were demonstrated and electrical characterization was performed. Since the process requires low temperature, it carries substantial potential for fabrication of electronics on a plastic substrate.

[1]  P. Calvert.  FREEFORMING OF POLYMERS , 1998 .

[2]  Dimos Poulikakos,et al.  Transport and solidification phenomena in molten microdroplet pileup , 2002 .

[3]  C. Grigoropoulos,et al.  All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles , 2007 .

[4]  H. Sirringhaus,et al.  Inkjet Printing of Polymer Thin-Film Transistor Circuits , 2003 .

[5]  Costas P. Grigoropoulos,et al.  Lithography-free high-resolution organic transistor arrays on polymer substrate by low energy selective laser ablation of inkjet-printed nanoparticle film , 2008 .

[6]  Costas P. Grigoropoulos,et al.  Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing , 2007 .

[7]  Marc D. Porter,et al.  Alkanethiolate Gold Cluster Molecules with Core Diameters from 1.5 to 5.2 nm: Core and Monolayer Properties as a Function of Core Size , 1998 .

[8]  E. Wolf,et al.  Resonance states as solutions of the Schrodinger equation with a nonlocal boundary condition , 1976 .

[9]  Chul B. Park,et al.  Heat Transfer During Deposition of Molten Aluminum Alloy Droplets to Build Vertical Columns , 2009 .

[10]  Henning Sirringhaus,et al.  Inkjet Printing of Functional Materials , 2003 .

[11]  J. Chun,et al.  Microsensor for impact of molten metal microdrops , 2004 .

[12]  C. Grigoropoulos,et al.  Air stable high resolution organic transistors by selective laser sintering of ink-jet printed metal nanoparticles , 2007 .

[13]  Costas P. Grigoropoulos,et al.  Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate , 2009 .

[14]  P. Buffat,et al.  Size effect on the melting temperature of gold particles , 1976 .

[15]  Sawyer B. Fuller,et al.  Ink-jet printed nanoparticle microelectromechanical systems , 2002 .

[16]  Katsuyuki Morii,et al.  Inkjet Printing of Light-Emitting Polymer Displays , 2003 .

[17]  Takashi Yamanaka,et al.  Generation of three-dimensional micro structure using metal jet , 2000 .

[18]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[19]  Costas P. Grigoropoulos,et al.  Conductor microstructures by laser curing of printed gold nanoparticle ink , 2004 .

[20]  T. Kang,et al.  Theoretical Analysis and Experimental Characterization of DoD Metal-Jet System , 2007 .