Analytical derivation of elasticity in breast phantoms for deformation tracking

PurposePatient-specific biomedical modeling of the breast is of interest for medical applications such as image registration, image guided procedures and the alignment for biopsy or surgery purposes. The computation of elastic properties is essential to simulate deformations in a realistic way. This study presents an innovative analytical method to compute the elastic modulus and evaluate the elasticity of a breast using magnetic resonance (MRI) images of breast phantoms.MethodsAn analytical method for elasticity computation was developed and subsequently validated on a series of geometric shapes, and on four physical breast phantoms that are supported by a planar frame. This method can compute the elasticity of a shape directly from a set of MRI scans. For comparison, elasticity values were also computed numerically using two different simulation software packages.ResultsApplication of the different methods on the geometric shapes shows that the analytically derived elongation differs from simulated elongation by less than 9% for cylindrical shapes, and up to 18% for other shapes that are also substantially vertically supported by a planar base. For the four physical breast phantoms, the analytically derived elasticity differs from numeric elasticity by 18% on average, which is in accordance with the difference in elongation estimation for the geometric shapes. The analytic method has shown to be multiple orders of magnitude faster than the numerical methods.ConclusionIt can be concluded that the analytical elasticity computation method has good potential to supplement or replace numerical elasticity simulations in gravity-induced deformations, for shapes that are substantially supported by a planar base perpendicular to the gravitational field. The error is manageable, while the calculation procedure takes less than one second as opposed to multiple minutes with numerical methods. The results will be used in the MRI and Ultrasound Robotic Assisted Biopsy (MURAB) project.

[1]  Sébastien Ourselin,et al.  A Nonlinear Biomechanical Model Based Registration Method for Aligning Prone and Supine MR Breast Images , 2014, IEEE Transactions on Medical Imaging.

[2]  Gui-Rong Liu,et al.  The Finite Element Method , 2007 .

[3]  Stephane Cotin,et al.  EP4A: Software and Computer Based Simulator Research: Development and Outlook SOFA—An Open Source Framework for Medical Simulation , 2007, MMVR.

[4]  Thomas E. Yankeelov,et al.  Realization of a biomechanical model-assisted image guidance system for breast cancer surgery using supine MRI , 2015, International Journal of Computer Assisted Radiology and Surgery.

[5]  Daniel Thalmann,et al.  Deformable Tissue Parameterized by Properties of Real Biological Tissue , 2003, IS4TH.

[6]  Sébastien Ourselin,et al.  Biomechanically guided prone-to-supine image registration of breast MRI using an estimated reference state , 2013, 2013 IEEE 10th International Symposium on Biomedical Imaging.

[7]  Paul Keall,et al.  An MRI‐compatible patient rotation system — design, construction, and first organ deformation results , 2017, Medical physics.

[8]  Lianghao Han,et al.  Development of patient-specific biomechanical models for predicting large breast deformation , 2012, Physics in medicine and biology.

[9]  Michael Brady,et al.  Prone-Supine Breast MRI Registration for Surgical Visualisation , .

[10]  Sébastien Ourselin,et al.  A hybrid fem-based method for aligning prone and supine images for image guided breast surgery , 2011, 2011 IEEE International Symposium on Biomedical Imaging: From Nano to Macro.

[11]  Cristian Lorenz,et al.  Breast deformation modelling: comparison of methods to obtain a patient specific unloaded configuration , 2014, Medical Imaging.

[12]  Stephane Cotin,et al.  A hybrid elastic model for real-time cutting, deformations, and force feedback for surgery training and simulation , 2000, The Visual Computer.

[13]  Paolo Fiorini,et al.  Simulation of deformable environment with haptic feedback on GPU , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[14]  Martin J. Yaffe,et al.  Biomechanical 3-D finite element modeling of the human breast using MRI data , 2001, IEEE Transactions on Medical Imaging.

[15]  David J. Hawkes,et al.  Validation of nonrigid image registration using finite-element methods: application to breast MR images , 2003, IEEE Transactions on Medical Imaging.

[16]  David Gavaghan,et al.  Predicting Tumor Location by Modeling the Deformation of the Breast , 2008, IEEE Transactions on Biomedical Engineering.

[17]  Hervé Delingette,et al.  Non-linear anisotropic elasticity for real-time surgery simulation , 2003, Graph. Model..

[18]  Daniel Rueckert,et al.  Nonrigid registration using free-form deformations: application to breast MR images , 1999, IEEE Transactions on Medical Imaging.

[19]  Paul J. Besl,et al.  A Method for Registration of 3-D Shapes , 1992, IEEE Trans. Pattern Anal. Mach. Intell..

[20]  David J. Hawkes,et al.  MR Navigated Breast Surgery: Method and Initial Clinical Experience , 2008, MICCAI.

[21]  Dinesh K. Pai,et al.  A unified treatment of elastostatic contact simulation for real time haptics , 2005, SIGGRAPH Courses.

[22]  Paul Suetens,et al.  Validation of different soft tissue simulation methods for breast augmentation , 2005 .

[23]  Dimitris N. Metaxas,et al.  A deformable finite element model of the breast for predicting mechanical deformations under external perturbations. , 2001, Academic radiology.

[24]  Martyn P. Nash,et al.  Breast Image Registration by Combining Finite Elements and Free-Form Deformations , 2010, Digital Mammography / IWDM.

[25]  Julie David,et al.  Breast Biopsies Under Magnetic Resonance Imaging Guidance: Challenges of an Essential but Imperfect Technique. , 2016, Current problems in diagnostic radiology.

[26]  Yeong-Hwa Chang,et al.  Development scheme of haptic-based system for interactive deformable simulation , 2010, Comput. Aided Des..

[27]  Bradley J. Nelson,et al.  Deformable object tracking using the boundary element method , 2003, 2003 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2003. Proceedings..