Nanotribology-based novel characterization techniques for the dielectric charging failure mechanism in electrostatically actuated NEMS/MEMS devices using force-distance curve measurements.

The work presents a comprehensive package of novel nanoscale characterization techniques to study dielectric charging in electrostatic nano- and microelectromechanical systems (NEMS and MEMS). The proposed assessment methodologies are based on the force-distance curve (FDC) measurements performed using an atomic force microscope (AFM) to measure, for the first time, the induced surface potential and adhesive force over charged dielectric films. They were employed to study plasma enhanced chemical vapor deposition (PECVD) silicon nitride films for application in electrostatic capacitive RF MEMS switches. Three different techniques were introduced including the application of FDC measurements to study charging in bare SiN(x) films, metal-insulator-metal (MIM) capacitors, and MEMS switches. The results from the three methods were correlated and compared with the published data from other characterization techniques, mainly charge/discharge current transient (C/DCT) and Kelvin probe force microscopy (KPFM). The unique advantages of the proposed FDC-based characterization techniques are twofold. First, they can measure the multiphysics coupling between the dielectric charging phenomenon and tribological issues at the interface between the switch bridge and the dielectric surface. Second, the FDC-based techniques can measure larger levels of induced surface potential over charged dielectric films which results from the high electric field normally used to actuate MEMS switches. Based on the proposed FDC techniques, the influence of several parameters on dielectric charging/discharging processes was investigated: the dielectric film thickness, deposition conditions, substrate, and electrical stress conditions.

[1]  Patrick Pons,et al.  Voltage and temperature effect on dielectric charging for RF-MEMS capacitive switches reliability investigation , 2008, Microelectron. Reliab..

[2]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[3]  Patrick Pons,et al.  Dielectric charging in silicon nitride films for MEMS capacitive switches: Effect of film thickness and deposition conditions , 2009, Microelectron. Reliab..

[4]  R Plana,et al.  Nanoscale characterization of different stiction mechanisms in electrostatically driven MEMS devices based on adhesion and friction measurements. , 2011, Journal of colloid and interface science.

[5]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[6]  Patrick Pons,et al.  Kelvin probe microscopy for reliability investigation of RF-MEMS capacitive switches , 2008, Microelectron. Reliab..

[7]  A. Stemmer,et al.  Resolution and contrast in Kelvin probe force microscopy , 1998 .

[8]  G. Dietler,et al.  Force-distance curves by atomic force microscopy , 1999 .

[9]  Patrick Pons,et al.  Charging-Effects in RF capacitive switches influence of insulating layers composition , 2006, Microelectron. Reliab..

[10]  Michael Hietschold,et al.  Parasitic charging of dielectric surfaces in capacitive microelectromechanical systems (MEMS) , 1998 .

[11]  Rampi Ramprasad,et al.  Phenomenological theory to model leakage currents in metal–insulator–metal capacitor systems , 2003 .

[12]  Brian J. Sealy,et al.  Changes in the Poole–Frenkel coefficient with current induced defect band conductivity of hydrogenated amorphous silicon nitride , 1998 .

[13]  Andrew G. Glen,et al.  APPL , 2001 .

[14]  J. C. Phillips,et al.  Stretched exponential relaxation in molecular and electronic glasses , 1996 .

[15]  Jim Euchner.  Design , 2014, Catalysis from A to Z.

[16]  Patrick Pons,et al.  Structure dependent charging process in RF MEMS capacitive switches , 2007, Microelectron. Reliab..

[17]  J. R. Reid,et al.  Measurements of charging in capacitive microelectromechanical switches , 2002 .

[18]  P. Bräunlich,et al.  Thermally stimulated relaxation in solids , 1979 .

[19]  Robert Puers,et al.  A comprehensive model to predict the charging and reliability of capacitive RF MEMS switches , 2004 .

[20]  John Martin Shannon,et al.  Current induced drift mechanism in amorphous SiNx:H thin film diodes , 1994 .

[21]  H. Wang,et al.  Assessment of dielectric charging in electrostatically driven MEMS devices: A comparison of available characterization techniques , 2010, Microelectron. Reliab..

[22]  Hiroyuki Sugimura,et al.  Potential shielding by the surface water layer in Kelvin probe force microscopy , 2002 .

[23]  Robert Plana,et al.  ESD failure signature in capacitive RF MEMS switches , 2008, Microelectron. Reliab..

[24]  R Plana,et al.  Nanoscale characterization of the dielectric charging phenomenon in PECVD silicon nitride thin films with various interfacial structures based on Kelvin probe force microscopy. , 2011, Nanotechnology.

[25]  G. Papaioannou,et al.  Temperature study of the dielectric polarization effects of capacitive RF MEMS switches , 2005, IEEE Transactions on Microwave Theory and Techniques.

[26]  J. Papapolymerou,et al.  Effect of deposition conditions on charging processes in SiNx: Application to RF-MEMS capacitive switches , 2009 .

[27]  Hiroshi Yokoyama,et al.  Scanning maxwell stress microscope for nanometre-scale surface electrostatic imaging of thin films , 1994 .

[28]  Patrick Pons,et al.  A systematic reliability investigation of the dielectric charging process in electrostatically actuated MEMS based on Kelvin probe force microscopy , 2010 .

[29]  J. Boogaard,et al.  Current‐stress induced asymmetry in hydrogenated amorphous silicon n‐i‐n devices , 1992 .

[30]  John G. Simmons,et al.  Poole-Frenkel Effect and Schottky Effect in Metal-Insulator-Metal Systems , 1967 .

[31]  J. Cazaux,et al.  Reliability modeling of capacitive RF MEMS , 2005, IEEE Transactions on Microwave Theory and Techniques.

[32]  R Plana,et al.  On the influence of environment gases, relative humidity and gas purification on dielectric charging/discharging processes in electrostatically driven MEMS/NEMS devices , 2011, Nanotechnology.

[33]  P. Pons,et al.  Frequency Scalable Model for MEMS Capacitive Shunt Switches at Millimeter-Wave Frequencies , 2009, IEEE Transactions on Microwave Theory and Techniques.

[34]  B. Bhushan.  Nanotribology and nanomechanics of MEMS/NEMS and BioMEMS/BioNEMS materials and devices , 2007 .