On-line prediction of crystallinity spatial distribution across polymer films using NIR spectral imaging and chemometrics methods

A rapid and non-intrusive on-line NIR imaging sensor is developed for monitoring spatio-temporal crystallinity variations across the surface of polymer films. A multivariate image analysis and regression (MIA/MIR) approach is proposed and compared with standard NIR calibration techniques using averaged spectra or second order derivatives combined with PLS regression. Predictions of both the local and global crystallinity variations of HDPE, LDPE, and PP polymer samples were obtained with each approach. Our results show that small variations in crystallinity introduced by changes in cooling rates can be predicted within experimental errors. Crystallinity spatial distributions were also validated and found consistent with processing conditions.

[1]  Honglu Yu,et al.  Monitoring flames in an industrial boiler using multivariate image analysis , 2004 .

[2]  Paul Geladi,et al.  Hyperspectral NIR image regression part I: calibration and correction , 2005 .

[3]  J. Shepherd,et al.  Modeling morphology evolution and mechanical behavior during thermo-mechanical processing of semi-crystalline polymers , 2006 .

[4]  Paul Geladi,et al.  Strategies for multivariate image regression , 1992 .

[5]  Y. Ozaki,et al.  Near Infrared Spectra of Pellets and Thin Films of High-Density, Low-Density and Linear Low-Density Polyethylenes and Prediction of Their Physical Properties by Multivariate Data Analysis , 2003 .

[6]  M. Newman,et al.  Pressure-induced amorphization and disordering on cooling in a crystalline polymer , 1991, Nature.

[7]  H. H. Madden.  Comments on the Savitzky-Golay convolution method for least-squares-fit smoothing and differentiation of digital data , 1976 .

[8]  Curtis F. Gerald.  Applied numerical analysis , 1970 .

[9]  Honglu Yu,et al.  Standardization of line‐scan NIR imaging systems , 2007 .

[10]  B. Stuart.  Polymer crystallinity studied using Raman spectroscopy , 1996 .

[11]  M. Huffman,et al.  Quantitative analysis of dimethyl titanocene by iodometric titration, gas chromatography and NMR. , 2001, Journal of Pharmaceutical and Biomedical Analysis.

[12]  Reinaldo Jose Gonzalez,et al.  Temperature and crystallinity profiles in polyolefines isothermal and non-isothermal solidification processes , 2003 .

[13]  J. Macgregor,et al.  Digital Imaging for Online Monitoring and Control of Industrial Snack Food Processes , 2003 .

[14]  M. Whitbeck.  Second Derivative Infrared Spectroscopy , 1981 .

[15]  D. Brown,et al.  Application of small angle X-ray scattering to semi-crystalline polymers: 1. Experimental considerations and analysis of data , 1973 .

[16]  D. C. Joy,et al.  Low-voltage scanning electron microscopy of polymers , 1986 .

[17]  Stephen N. Kukureka,et al.  A study of the tribological behaviour of polyamide 66 with varying injection-moulding parameters , 2001 .

[18]  Y. Ozaki,et al.  A near-infrared study of thermally induced structural changes in polyethylene crystal , 2006 .

[19]  Junbin Gao,et al.  Chemometrics: From Basics to Wavelet Transform , 2004 .

[20]  N. Dusunceli,et al.  Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers , 2008 .

[21]  Giuseppe Titomanlio,et al.  Modeling of morphology evolution in the injection molding process of thermoplastic polymers , 2005 .

[22]  A. Benedetti,et al.  Crystallinity of polymers by x-ray diffraction: a new fitting approach , 1991 .

[23]  P. Geladi,et al.  Multivariate image analysis , 1996 .

[24]  K. Esbensen,et al.  Strategy of multivariate image analysis (MIA) , 1989 .

[25]  Carl Duchesne,et al.  Multivariate Image Analysis of Flames for Product Quality and Combustion Control in Rotary Kilns , 2006 .

[26]  B. Desbat,et al.  The use of near-infra-red spectroscopy coupled to the polarization modulation technique to investigate molecular orientation in uniaxially stretched polymers , 1995 .

[27]  B. Briskman.  Be careful when using X-ray exposure analysis for polymers , 2007 .

[28]  J. Griffiths,et al.  The crystallization kinetics of polyethylene under isothermal and non-isothermal conditions , 1989 .

[29]  A. Ogale,et al.  Online measurements of crystallinity using Raman spectroscopy during blown film extrusion of a linear low-density polyethylene , 2004 .

[30]  G. Lachenal.  Dispersive and Fourier transform near-infrared spectroscopy of polymeric materials , 1995 .

[31]  W. A. Jenkins,et al.  Plastic Films: Technology and Packaging Applications , 1992 .

[32]  Klaus Bergmann,et al.  Determination of polymer crystallinity from proton solid-echo NMR measurements , 1981 .

[33]  Honglu Yu,et al.  Multivariate image analysis and regression for prediction of coating content and distribution in the production of snack foods , 2003 .

[34]  H. Newman,et al.  The skin‐core morphology and structure–property relationships in injection‐molded polypropylene , 1972 .

[35]  Celal Batur,et al.  On-line crystallinity measurement using laser Raman spectrometer and neural network , 1999 .

[36]  A. Savitzky,et al.  Smoothing and Differentiation of Data by Simplified Least Squares Procedures. , 1964 .

[37]  Manish H. Bharati,et al.  Softwood Lumber Grading through On-line Multivariate Image Analysis Techniques , 2003 .

[38]  John F. MacGregor,et al.  Flotation froth monitoring using multiresolutional multivariate image analysis , 2005 .

[39]  K. Funatsu,et al.  Prediction of Polyethylene Density by Near-Infrared Spectroscopy Combined with Neural Network Analysis , 2003 .

[40]  Paul Geladi,et al.  Hyperspectral imaging: calibration problems and solutions , 2004 .

[41]  S. Wold.  Cross-Validatory Estimation of the Number of Components in Factor and Principal Components Models , 1978 .