Hierarchical structure and deformation behavior of a novel multicomponent β titanium alloy with ultrahigh strength

[1]  M. Zhan,et al.  Mesoscale deformation mechanisms in relation with slip and grain boundary sliding in TA15 titanium alloy during tensile deformation , 2021 .

[2]  Y. Yang,et al.  Plastic deformation via hierarchical nano-sized martensitic twinning in the metastable β Ti-24Nb-4Zr-8Sn alloy , 2020 .

[3]  F. Prima,et al.  In-situ microstructural investigations of the TRIP-to-TWIP evolution in Ti-Mo-Zr alloys as a function of Zr concentration , 2020 .

[4]  Mei Zhan,et al.  Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: A review , 2020, Journal of Materials Science & Technology.

[5]  Wenguang Zhu,et al.  Face centered cubic substructure and improved tensile property in a novel β titanium alloy Ti–5Al–4Zr–10Mo–3Cr , 2020 .

[6]  A. Minor,et al.  Impurity and Texture Driven HCP-to-FCC Transformations in Ti-X Thin Films During in Situ TEM Annealing and FIB Milling , 2019, Acta Materialia.

[7]  M. Qi,et al.  Influence of thermal treatment on element partitioning in α+β titanium alloy , 2019, Journal of Alloys and Compounds.

[8]  Yan Ma,et al.  Improving mechanical properties of near beta titanium alloy by high-low duplex aging , 2019, Materials Science and Engineering: A.

[9]  Lin Xiao,et al.  A novel high-strength β-Ti alloy with hierarchical distribution of α-phase: The superior combination of strength and ductility , 2019, Materials & Design.

[10]  G. J. Li,et al.  Dependence of mechanical properties on the microstructural parameters of TA15 titanium alloy with tri-modal microstructure , 2019, Materials Science and Engineering: A.

[11]  G. Cao,et al.  A semi-empirical approach to the prediction of deformation behaviors of β-Ti alloys , 2019, Scripta Materialia.

[12]  R. Caram,et al.  The effect of Zr and Sn additions on the microstructure of Ti-Nb-Fe gum metals with high elastic admissible strain , 2018, Materials & Design.

[13]  J. Lei,et al.  Evolution of microstructure and phase composition of Ti-3Al-5Mo-4.5V alloy with varied β phase stability , 2018, Journal of Materials Science & Technology.

[14]  D. Choudhuri,et al.  Tuning the scale of α precipitates in β-titanium alloys for achieving high strength , 2018, Scripta Materialia.

[15]  M. Zhan,et al.  Crystallographic orientation evolution during the development of tri-modal microstructure in the hot working of TA15 titanium alloy , 2018 .

[16]  A. Minor,et al.  In situ TEM observation of FCC Ti formation at elevated temperatures , 2017 .

[17]  K. Zhou,et al.  Isothermal kinetics of β ↔ α transformation in Ti-55531 alloy influenced by phase composition and microstructure , 2017 .

[18]  G. P. Zhang,et al.  Influence of alloy element partitioning on strength of primary α phase in Ti-6Al-4V alloy , 2017 .

[19]  W. Gan,et al.  Composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation , 2017 .

[20]  K. Zhou,et al.  Effect of α morphology on the diffusional β ↔ α transformation in Ti–55531 during continuous heating: Dissection by dilatometer test, microstructure observation and calculation , 2017 .

[21]  C. Tomé,et al.  Rolling-induced Face Centered Cubic Titanium in Hexagonal Close Packed Titanium at Room Temperature , 2016, Scientific Reports.

[22]  A. Devaraj,et al.  A low-cost hierarchical nanostructured beta-titanium alloy with high strength , 2016, Nature Communications.

[23]  Yufeng Zheng,et al.  The indirect influence of the ω phase on the degree of refinement of distributions of the α phase in metastable β-Titanium alloys , 2016 .

[24]  G. Requena,et al.  Role of element partitioning on the α–β phase transformation kinetics of a bi-modal Ti–6Al–6V–2Sn alloy during continuous heating , 2015 .

[25]  D. Wexler,et al.  The influence of β phase stability on deformation mode and compressive mechanical properties of Ti–10V–3Fe–3Al alloy , 2015 .

[26]  Sung-Hwan Lim,et al.  Stress-induced hexagonal close-packed to face-centered cubic phase transformation in commercial-purity titanium under cryogenic plane-strain compression , 2013 .

[27]  James C. Williams,et al.  Perspectives on Titanium Science and Technology , 2013 .

[28]  F. Prima,et al.  Controlling reversible martensitic transformation in titanium alloys with high strength and low elastic modulus , 2012 .

[29]  Yan Liu,et al.  Influences of deformation strain, strain rate and cooling rate on the Burgers orientation relationsh , 2012 .

[30]  Xiaoli Zhao,et al.  Microstructures and mechanical properties of metastable Ti-30Zr-(Cr, Mo) alloys with changeable Young's modulus for spinal fixation applications. , 2011, Acta biomaterialia.

[31]  A. Wilkinson,et al.  Electron backscatter diffraction study of dislocation content of a macrozone in hot-rolled Ti?6Al?4V alloy , 2010 .

[32]  J. Eckert,et al.  Powder metallurgy of Al-based metal matrix composites reinforced with β-Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties , 2009 .

[33]  H. Fraser,et al.  ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloy , 2009 .

[34]  Leo Kestens,et al.  Nucleation and variant selection of secondary α plates in a β Ti alloy , 2008 .

[35]  C. H. Ward,et al.  A comparative study of the mechanical properties of high-strength -titanium alloys , 2008 .

[36]  M. Morinaga,et al.  General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters , 2006 .

[37]  Akira Takeuchi,et al.  Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element , 2005 .

[38]  John C. Fanning,et al.  Quick reference guide for β titanium alloys in the 00s , 2005 .

[39]  R. Boyer.  An overview on the use of titanium in the aerospace industry , 1996 .

[40]  Paul J. Bania,et al.  Beta titanium alloys and their role in the titanium industry , 1994 .

[41]  T. W. Duerig,et al.  Microstructure, tensile deformation, and fracture in aged ti 10V-2Fe-3Al , 1983 .