Damage characterization of embedded defects in composites using a hybrid thermography, computational, and artificial neural networks approach

[1]  Daun Lee,et al.  Autonomous Assessment of Delamination in Laminated Composites using Deep Learning and Data Augmentation , 2022, Composite Structures.

[2]  Y. Zheng,et al.  Multi-characteristic combination based reliability enhancement of optical bidirectional thermal wave radar imaging for GFRP laminates with subsurface defects , 2021 .

[3]  K. Balasubramaniam,et al.  Influence of absorptivity of the material surface in crack detection using laser spot thermography , 2021, NDT & E International.

[4]  Jianqiao Ye,et al.  A micromechanics and machine learning coupled approach for failure prediction of unidirectional CFRP composites under triaxial loading: A preliminary study , 2021, Composite Structures.

[5]  Zijun Wang,et al.  Variational level set and fuzzy clustering for enhanced thermal image segmentation and damage assessment , 2021 .

[6]  Kaixin Liu,et al.  Enhanced Defect Detection in Carbon Fiber Reinforced Polymer Composites via Generative Kernel Principal Component Thermography , 2021, Polymers.

[7]  F. Al-Sulaiman,et al.  Experimental and Computational Analysis of Low-Velocity Impact on Carbon-, Glass- and Mixed-Fiber Composite Plates , 2020, Journal of Composites Science.

[8]  Junyan Liu,et al.  A study on the SNR performance analysis of laser-generated bidirectional thermal wave radar imaging inspection for hybrid C/GFRP laminate defects , 2020 .

[9]  Kaixin Liu,et al.  Generative Principal Component Thermography for Enhanced Defect Detection and Analysis , 2020, IEEE Transactions on Instrumentation and Measurement.

[10]  M. Omar,et al.  A neural network approach for quantifying defects depth, for nondestructive testing thermograms , 2018, Infrared Physics & Technology.

[11]  Robert Schmitt,et al.  Depth determination of defects in CFRP-structures using lock-in thermography , 2018, Composites Part B: Engineering.

[12]  M. S. Safizadeh,et al.  Delamination detection in glass–epoxy composites using step-phase thermography (SPT) , 2015 .

[13]  Wang Yang,et al.  Inverse heat transfer approach for nondestructive estimation the size and depth of subsurface defects of CFRP composite using lock-in thermography , 2015 .

[14]  C. Maierhofer,et al.  Characterizing damage in CFRP structures using flash thermography in reflection and transmission configurations , 2014 .

[15]  A. Arif,et al.  Damage Characterization Using Thermography of Composite Plates Subjected to Low Velocity Impact Loads , 2019 .

[16]  P. Pastuszak.  International Conference on Computational Heat and Mass Transfer , ICCHMT 2016 Characterization of Defects in Curved Composite Structures Using Active Infrared Thermography , 2016 .