Rational design of MgB2 conductors toward practical applications

We report the research progress that has been made on developing rational MgB2 superconducting conductors toward practical applications. Owing to the poor performance of the critical current density (Jc) of bare MgB2, various techniques have been developed to overcome this obstacle. Among these, chemical doping has proved to be the most effective way to enhance the superconducting properties, such as Jc and the irreversibility field (Birr). More than a hundred different forms of dopants have been investigated over the past 13 years. Among these, the most effective dopants have been identified to be silicon carbide, carbon, and malic acid. The best results, Birr of 22 T and Jc of 40,000 A cm−2 at 4.2 K and 10 T, have been reported for malic acid treated MgB2 conductors, which have matched the benchmark performance of commercial low temperature superconductor wire such as Nb–Ti. This work will review and discuss the progress on MgB2 conductor development over the past few years at the University of Wollongong and Hyper Tech Research, Inc.

[1]  T. Nakamura,et al.  Development of Stator Windings for Fully Superconducting Motor With $\hbox{MgB}_{2}$ Wires , 2013, IEEE Transactions on Applied Superconductivity.

[2]  D. Miyagi,et al.  Design Study of $\hbox{MgB}_{2}$ SMES Coil for Effective Use of Renewable Energy , 2013, IEEE Transactions on Applied Superconductivity.

[3]  T. Nakamura,et al.  Current Pumping Performance of Linear-Type Magnetic Flux Pump With Use of Feedback Control Circuit System , 2006, IEEE Transactions on Applied Superconductivity.

[4]  Yukikazu Iwasa,et al.  HTS and NMR/MRI magnets : Unique features, opportunities, and challenges , 2006 .

[5]  Heinz-Werner Neumueller,et al.  HTS flux pump for cryogen-free HTS magnets , 2005, IEEE Transactions on Applied Superconductivity.

[6]  Satoshi Hata,et al.  Microscopic role of carbon on MgB2 wire for critical current density comparable to NbTi , 2012 .

[7]  R. Shimada,et al.  Design Considerations for SMES Systems Using$rm MgB_2$and/or High-Temperature Superconductors , 2006, IEEE Transactions on Applied Superconductivity.

[8]  J. Karpinski,et al.  Effect of carbon substitution on low magnetic field AC losses in MgB2 single crystals , 2011 .

[9]  W. Markiewicz.  Current injection for field decay compensation in NMR spectrometer magnets , 2002 .

[10]  Seungyong Hahn,et al.  A Solid Nitrogen Cooled ${\hbox{MgB}}_{2}$ “Demonstration” Coil for MRI Applications , 2008, IEEE Transactions on Applied Superconductivity.

[11]  Y. Lvovsky.  Index Loss Effect in n-Value Measurements of Commercial Superconductors , 2009, IEEE Transactions on Applied Superconductivity.

[12]  The Percolation Model , 2007 .

[13]  Minoru Maeda,et al.  Tailored Materials for High‐Performance MgB2 Wire , 2011, Advanced materials.

[14]  J. Nagamatsu,et al.  Superconductivity at 39 K in magnesium diboride , 2001, Nature.

[15]  Seungyong Hahn,et al.  A Superconducting Joint Technique for ${\rm MgB}_{2}$ Round Wires , 2009, IEEE Transactions on Applied Superconductivity.

[16]  Jiayin Ling,et al.  Monofilament $\hbox{MgB}_{2}$ Wire for a Whole-Body MRI Magnet: Superconducting Joints and Test Coils , 2013, IEEE Transactions on Applied Superconductivity.

[17]  M. Eisterer.  Magnetic properties and critical currents of MgB2 , 2007 .

[18]  Kathleen Melanie Amm,et al.  Test Coil for the Development of a Compact 3 T ${\rm MgB}_{2}$ Magnet , 2012, IEEE Transactions on Applied Superconductivity.

[19]  Kathleen Melanie Amm,et al.  Hydrogen Cooling Options for MgB2-based Superconducting Systems. , 2014, AIP conference proceedings.

[20]  Y. Iwasa,et al.  Superconducting joint between multifilamentary wires 1. Joint-making and joint results , 1976 .

[21]  T C Cosmus,et al.  Advances in Whole-Body MRI Magnets , 2011, IEEE Transactions on Applied Superconductivity.

[22]  M. Tomsic,et al.  ${\rm MgB}_{2}$ for MRI Magnets: Test Coils and Superconducting Joints Results , 2012, IEEE Transactions on Applied Superconductivity.

[23]  K. Vinod,et al.  Prospects for MgB2 superconductors for magnet application , 2006 .

[24]  MgB2 thin films , 2009 .

[25]  S. Dou,et al.  A comparative study on field, temperature, and strain dependences of the critical current for doped and undoped MgB2 wires based on the percolation model , 2009 .

[26]  D. Park,et al.  Solid-Cryogen Cooling Technique for Superconducting Magnets of NMR and MRI , 2012 .

[27]  M. Takahashi,et al.  Relaxation of Trapped High Magnetic Field in 100 m-long Class$rm MgB_2$Solenoid Coil in Persistent Current Mode Operation , 2006, IEEE Transactions on Applied Superconductivity.

[28]  Nanoscale-SiC doping for enhancing Jc and Hc2 in superconducting MgB2 , 2003, cond-mat/0308265.

[29]  C. Senatore,et al.  A New Generation of In Situ ${\rm MgB}_{2}$ Wires With Improved $J_{\rm c}$ and $B_{\rm irr}$ Values Obtained by Cold Densification (CHPD) , 2011, IEEE Transactions on Applied Superconductivity.

[30]  R. Mai,et al.  A digital flux injector for NMR magnets , 2005, IEEE Transactions on Applied Superconductivity.

[31]  Yukikazu Iwasa,et al.  MgB2 Coils for MRI Applications. , 2010, IEEE transactions on applied superconductivity : a publication of the IEEE Superconductivity Committee.

[32]  M. Tomsic,et al.  A MgB2 12.5 kVA superconductor transformer , 2009 .

[33]  C. Senatore,et al.  Technical aspects of cold high pressure densification (CHPD) on long lengths of In Situ MgB2 wires with enhanced Jc values , 2012 .

[34]  R. Viola,et al.  Magnetic and Transport Characterization of NbTi Strands as a Basis for the Design of Fusion Magnets , 2009, IEEE Transactions on Applied Superconductivity.

[35]  Kathleen Melanie Amm,et al.  Second Test Coil for the Development of a Compact 3 T $ \hbox{MgB}_{2}$ Magnet , 2013, IEEE Transactions on Applied Superconductivity.

[36]  Yukikazu Iwasa,et al.  A flux pump for NMR magnets , 2003 .

[37]  H. Kitaguchi,et al.  Fabrication and properties of powder-in-tube-processed MgB2 tape conductors , 2007 .

[38]  Peter J. Shirron,et al.  A lightweight low-current 10 K magnet for space-flight ADRs , 2006 .

[39]  M. Takeguchi,et al.  High-performance MgB2 superconducting wires for use under liquid-helium-free conditions fabricated using an internal Mg diffusion process , 2013 .

[40]  E. W. Collings,et al.  Overview of MgB2 Superconductor Applications , 2007 .

[41]  RAPID COMMUNICATION: Significant enhancement of Hc2 and Hirr in MgB2+C4H6O5 bulks at a low sintering temperature of 600 °C , 2007 .

[42]  S. Noguchi,et al.  Comparison of Optimal Configuration of SMES Magnet Wound With $\hbox{MgB}_{2}$ and YBCO Conductors , 2013, IEEE Transactions on Applied Superconductivity.

[43]  M. Tomsic,et al.  Development of magnesium diboride (MgB2) wires and magnets using in situ strand fabrication method , 2007 .

[44]  R. Gehring,et al.  LIQHYSMES—A 48 GJ Toroidal MgB2-SMES for Buffering Minute and Second Fluctuations , 2013, IEEE Transactions on Applied Superconductivity.

[45]  Jianming Jin.  Electromagnetic Analysis and Design in Magnetic Resonance Imaging , 1998 .

[46]  Yukikazu Iwasa,et al.  Case Studies in Superconducting Magnets: Design and Operational Issues , 1994 .

[47]  S. Dou,et al.  Comparative study of mono- and multi-filament MgB2 wires with different boron powders and malic acid addition , 2009 .

[48]  Pierluigi Bruzzone,et al.  High current superconductors for DEMO , 2013 .

[49]  R. Penco,et al.  A Round Table Discussion on$rm MgB_2$Toward a Wide Market or a Niche Production?—A Summary , 2006, IEEE Transactions on Applied Superconductivity.

[50]  S. Dou,et al.  Synergetic Combination of LIMD With CHPD for the Production of Economical and High Performance $\hbox{MgB}_{2}$ Wires , 2013, IEEE Transactions on Applied Superconductivity.

[51]  H. Inoue,et al.  Studies on thin film MgB2 for applications to RF structures for particle accelerators , 2012 .

[52]  X. Xi.  TOPICAL REVIEW: MgB 2 thin films , 2009 .

[53]  S. Dou,et al.  Correlation between critical current density and n-value in MgB2/Nb/Monel superconductor wires , 2010 .

[54]  J. Kim,et al.  The enhanced Jc and Birr of in situ MgB2 wires and tapes alloyed with C4H6O5 (malic acid) after cold high pressure densification , 2009 .

[55]  Yukikazu Iwasa,et al.  Microampere flux pumps for superconducting NMR magnets Part 1: basic concept and microtesla flux measurement , 2001 .

[56]  M. Tomsic,et al.  Influence of Mg/B ratio and SiC doping on microstructure and high field transport Jc in MgB2 strands , 2007 .

[57]  Carmine Senatore,et al.  Improvement of Jc by cold high pressure densification of binary, 18-filament in situ MgB2 wires , 2011 .

[58]  Takataro Hamajima,et al.  Conceptual design of MgB2 coil for the 100 MJ SMES of advanced superconducting power conditioning system (ASPCS) , 2012 .

[59]  Australia.,et al.  Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping , 2002, cond-mat/0207223.

[60]  Japan,et al.  Review of the superconducting properties of MgB2 , 2001 .

[61]  R. Penco,et al.  Development of ex situ processed MgB2 wires and their applications to magnets , 2007 .

[62]  Superconducting flux pump for high-temperature superconductor insert coils of NMR magnets , 2002 .

[63]  Shunzhong Chen,et al.  Fabrication of NbTi Superconducting Joints for 400-MHz NMR Application , 2012, IEEE Transactions on Applied Superconductivity.

[64]  K. Funaki,et al.  Reduction of Magnetization in Windings Composed of HTS Tapes , 2012, IEEE Transactions on Applied Superconductivity.

[65]  D. Park,et al.  No-Insulation (NI) Winding Technique for Premature-Quench-Free NbTi MRI Magnets , 2012, IEEE Transactions on Applied Superconductivity.