Hydrogen and synthetic fuel production using high temperature solid oxide electrolysis cells (SOECs)

Abstract Hydrogen and syngas production through a combination of solid oxide electrolysis cells (SOECs) and power from renewable energy resources is an efficient production method that has several significant advantages. However, given its relative technological infancy, understanding the intricate reactions and transport processes within SOEC devices are necessary to advance the technology and establish the optimum operating conditions for eventual cost effective design. Consequently, the main objective of this study is to simulate the complex phenomena inside a planar SOEC using a previously developed and validated model. The model takes an intermediate fidelity approach to predicting the electrochemical and thermo-fluid phenomena inside the cell. An example of the model calibration for an electrolyte supported SOEC is presented here. The model is then employed to investigate the effect of various operating parameters connected to SOEC electrochemical performance, as well as hydrogen and syngas production. The effect of the feedstock gas composition, temperature, and flow rate on performance and the important role that the reverse water-gas shift (RWGS) plays are illustrated. Although the operating temperature, fuel composition and flow rates have a direct effect on SOEC performance and power consumption, their influence on RWGS is more significant. Possible outlet syngas compositions of an SOEC and their appropriateness as a feedstock for the Fischer–Tropsch (FT) and methanation processes are also discussed.

[1]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[2]  Jonathan Deseure,et al.  Modelling of solid oxide steam electrolyser: Impact of the operating conditions on hydrogen production , 2011 .

[3]  Dennis Y.C. Leung,et al.  Energy and exergy analysis of hydrogen production by solid oxide steam electrolyzer plant , 2007 .

[4]  S. Ebbesen,et al.  Co-Electrolysis of Steam and Carbon Dioxide in Solid Oxide Cells , 2012 .

[5]  M. Melaina,et al.  Production of Fischer–Tropsch liquid fuels from high temperature solid oxide co-electrolysis units , 2012 .

[6]  Andre Peter Steynberg,et al.  Introduction to Fischer-Tropsch Technology , 2004 .

[7]  James E. O'Brien,et al.  TEST RESULTS OF HIGH TEMPERATURE STEAM/CO2 CO-ELECTROLYSIS IN A 10-CELL STACK , 2007 .

[8]  Robert J. Braun,et al.  Model validation and performance analysis of regenerative solid oxide cells for energy storage applications: Reversible operation , 2014 .

[9]  J. E. O’Brien,et al.  THERMODYNAMIC CONSIDERATIONS FOR THERMAL WATER SPLITTING PROCESSES AND HIGH TEMPERATURE ELECTROLYSIS , 2008 .

[10]  Tanju Sofu,et al.  Thermal-fluid and electrochemical modeling and performance study of a planar solid oxide electrolysis cell , 2008 .

[11]  Meng Ni,et al.  2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis , 2012 .

[12]  R. Kee,et al.  Modeling Distributed Charge-Transfer Processes in SOFC Membrane Electrode Assemblies , 2008 .

[13]  M. Dry,et al.  The Fischer–Tropsch process: 1950–2000 , 2002 .

[14]  Qingxi Fu,et al.  Syngas production via high-temperature steam/CO2 co-electrolysis: an economic assessment , 2010 .

[15]  Scott A. Barnett,et al.  High efficiency electrical energy storage using a methane–oxygen solid oxide cell , 2011 .

[16]  Carl M. Stoots,et al.  Syngas Production via High-Temperature Coelectrolysis of Steam and Carbon Dioxide , 2009 .

[17]  Meng Ni,et al.  An electrochemical model for syngas production by co-electrolysis of H2O and CO2 , 2012 .

[18]  K. Lackner,et al.  Sustainable hydrocarbon fuels by recycling CO2 and H2O with renewable or nuclear energy , 2011 .

[19]  Xingjian Xue,et al.  Modeling of Solid Oxide Electrolysis Cell for Syngas Generation with Detailed Surface Chemistry , 2012 .

[20]  P. Kazempoor,et al.  Model validation and performance analysis of regenerative solid oxide cells: Electrolytic operation , 2014 .

[21]  SYNGAS PRODUCTION VIA HIGH-TEMPERATURE CO-ELECTROLYSIS OF STEAM AND CARBON DIOXIDE IN A SOLID-OXIDE STACK , 2007 .

[22]  Vahid Rezaei.  LIDAR-based robust wind-scheduled control of wind turbines , 2014, 2014 American Control Conference.

[23]  V. Dorer,et al.  Response of a planar solid oxide fuel cell to step load and inlet flow temperature changes , 2011 .

[24]  Meng Ni,et al.  Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production , 2009 .

[25]  Marc Melaina,et al.  Design and technoeconomic performance analysis of a 1MW solid oxide fuel cell polygeneration system for combined production of heat, hydrogen, and power , 2012 .

[26]  James E. O'Brien,et al.  Parametric study of large-scale production of syngas via high-temperature co-electrolysis , 2007 .