论文信息 - Design of an indoor repeater antenna with high isolation using metamaterials

Design of an indoor repeater antenna with high isolation using metamaterials

In this article, an innovative indoor repeater antenna with high isolation is proposed. The necessary impedance bandwidth is obtained using the coupling between the main and parasitic patches. A high isolation between transmitting and receiving antennas is achieved using metamaterial. The fabricated indoor repeater antenna has a VSWR less than 1.5, a gain higher than 9.6 dBi, and an isolation between the transmitting and receiving antennas greater than 80 dB over the WiBro band from 2.3 to 2.5 GHz. © 2012 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:755–761, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26651

Youngki Lee | Jaehoon Choi | Jeageun Ha

[1] Hiroyuki Arai,et al. Mutual Coupling Characteristics of Choke Loaded Patch Array Antenna , 2005, IEICE Trans. Commun..

[2] Toshiyuki Maeyama,et al. Development of cellular repeater system with multiple radio echo suppresser , 2004, 2004 IEEE 15th International Symposium on Personal, Indoor and Mobile Radio Communications (IEEE Cat. No.04TH8754).

[3] R. Ziolkowski. Design, fabrication, and testing of double negative metamaterials , 2003 .

[4] Takashi Inoue,et al. Development of cellular repeater system with radio echo suppresser , 2006 .

[5] C. C. Courtney,et al. Time-domain measurement of the electromagnetic properties of materials , 1998 .

[6] Byungje Lee,et al. Isolation enhancement between two closely mounted antennas for indoor repeater systems , 2011 .

[7] Byungje Lee,et al. Miniature microstrip antenna with a partially filled high-permittivity substrate , 2002 .

[8] Kiyoshi Kobayashi,et al. On-frequency gap-filler using adaptive tracking null controller for next generation mobile satellite communication systems , 2005, 2005 IEEE 16th International Symposium on Personal, Indoor and Mobile Radio Communications.