Effect of back pressure on nozzle inner flow in fuel injector

[1]  Brane Širok,et al.  Relationship between cavitation structures and cavitation damage , 2004 .

[2]  Raul Payri,et al.  The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles , 2004 .

[3]  F. J. Salvador,et al.  Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics , 2005 .

[4]  Osman Asi,et al.  Failure of a diesel engine injector nozzle by cavitation damage , 2006 .

[5]  Raul Payri,et al.  Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions , 2008 .

[6]  Manolis Gavaises,et al.  Characterization of string cavitation in large-scale Diesel nozzles with tapered holes , 2009 .

[7]  Raul Payri,et al.  Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions , 2010 .

[8]  P. Aleiferis,et al.  Cavitation, primary break-up and flash boiling of gasoline, iso-octane and n-pentane with a real-size optical direct-injection nozzle , 2010 .

[9]  S. Hattori,et al.  Analysis of cavitation erosion resistance of cast iron and nonferrous metals based on database and comparison with carbon steel data , 2010 .

[10]  Raul Payri,et al.  Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization , 2011 .

[11]  Sibendu Som,et al.  Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions , 2011 .

[12]  Raul Payri,et al.  A contribution to the understanding of cavitation effects in Diesel injector nozzles through a combined experimental and computational investigation , 2012 .

[13]  Cyril Crua,et al.  A breakup model for transient Diesel fuel sprays , 2012 .

[14]  A. Dhar,et al.  Effect of fuel injection pressure on diesel particulate size and number distribution in a CRDI single cylinder research engine , 2013 .

[15]  Qian Wang,et al.  Effect of nozzle geometrical and dynamic factors on cavitating and turbulent flow in a diesel multi-hole injector nozzle , 2013 .

[16]  F. J. Salvador,et al.  STUDY OF THE INFLUENCE OF THE NEEDLE LIFT ON THE INTERNAL FLOW AND CAVITATION PHENOMENON IN DIESEL INJECTOR NOZZLES BY CFD USING RANS METHODS , 2013 .

[17]  A. Dhar,et al.  Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine , 2013 .

[18]  Greg Zilliac,et al.  Mass Flow Rate and Isolation Characteristics of Injectors for Use with Self-Pressurizing Oxidizers in Hybrid Rockets , 2013 .