Highly efficient inverted bulk-heterojunction solar cells with a gradiently-doped ZnO layer

In this study, we demonstrate a highly efficient inverted bulk heterojunction (BHJ) polymer solar cell using a wet-chemically prepared doped ZnO precursor with a self-organized ripple nanostructure as an electron extraction layer and a blend of poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)-carbonyl]-thieno-[3,4-b]thiophenediyl]] (PTB7) and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) as an active light absorbing layer. In order to enhance the electron extraction efficiency, the ZnO ripple surface was modified with various alkali metal carbonate materials including Li2CO3, K2CO3, Na2CO3, Cs2CO3, and (NH4)2CO3. The inclusion of an additional metal carbonate layer led to gradient doping of the ZnO ripple layer and improved the electron extraction properties by modifying the energy levels without destroying the ZnO ripple structures. The highest performing solar cells were fabricated with Li2CO3 and yielded a maximum PCE of 10.08%; this value represents a ∼14% increase in the efficiency compared to solar cells without a metal carbonate treatment.

[1]  Mi-Jin Jin,et al.  Impedance spectroscopy analysis on the effects of TiO2 interfacial atomic layers in ZnO nanorod polymer solar cells: Effects of interfacial charge extraction on diffusion and recombination , 2015 .

[2]  Youngjun Ko,et al.  Enhanced power conversion efficiency of inverted organic solar cells by using solution processed Sn-doped TiO2 as an electron transport layer , 2014 .

[3]  Bo Yeol Seo,et al.  Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk-heterojunction solar cells , 2014, Scientific Reports.

[4]  Juan Bisquert,et al.  General working principles of CH3NH3PbX3 perovskite solar cells. , 2014, Nano letters.

[5]  F. Fabregat‐Santiago,et al.  Diffusion–Recombination Impedance Model for Solar Cells with Disorder and Nonlinear Recombination , 2014 .

[6]  Shinuk Cho,et al.  Amine‐Based Polar Solvent Treatment for Highly Efficient Inverted Polymer Solar Cells , 2014, Advanced materials.

[7]  Gang Li,et al.  25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research , 2013, Advanced materials.

[8]  Tae‐Woo Lee,et al.  Air-stable inverted structure of hybrid solar cells using a cesium-doped ZnO electron transport layer prepared by a sol–gel process , 2013 .

[9]  Meng-Huan Jao,et al.  Additives for morphology control in high-efficiency organic solar cells , 2013 .

[10]  S. Jang,et al.  Performance optimization of low-temperature-annealed solution-processable ZnO buffer layers for inverted polymer solar cells , 2013 .

[11]  J. Bisquert,et al.  Elucidating Operating Modes of Bulk-Heterojunction Solar Cells from Impedance Spectroscopy Analysis. , 2013, The journal of physical chemistry letters.

[12]  Eun Mi Hong,et al.  Towards fabrication of high-performing organic photovoltaics: new donor-polymer, atomic layer deposited thin buffer layer and plasmonic effects , 2012 .

[13]  P. Müller‐Buschbaum,et al.  Efficiency-improved organic solar cells based on plasticizer assisted soft embossed PEDOT:PSS layers. , 2012, Physical chemistry chemical physics : PCCP.

[14]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[15]  S. Darling,et al.  Morphology characterization in organic and hybrid solar cells , 2012 .

[16]  Yang Yang,et al.  Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer , 2012, Nature Photonics.

[17]  Tae Il Lee,et al.  Low‐Temperature, Solution‐Processed and Alkali Metal Doped ZnO for High‐Performance Thin‐Film Transistors , 2012, Advanced materials.

[18]  Yongfang Li.  Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[19]  J. Fréchet,et al.  Molecular design and ordering effects in π-functional materials for transistor and solar cell applications. , 2011, Journal of the American Chemical Society.

[20]  Young Dok Kim,et al.  Spontaneous formation of nanoripples on the surface of ZnO thin films as hole-blocking layer of inverted organic solar cells , 2011 .

[21]  Siew Yee Lim,et al.  Measuring dopant concentrations in p-type silicon using iron-acceptor pairing monitored by band-to-band photoluminescence , 2011 .

[22]  Jin Young Kim,et al.  Combination of Titanium Oxide and a Conjugated Polyelectrolyte for High‐Performance Inverted‐Type Organic Optoelectronic Devices , 2011, Advanced materials.

[23]  A. Heeger,et al.  Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer. , 2011, Journal of the American Chemical Society.

[24]  Luping Yu,et al.  A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance. , 2010, Accounts of chemical research.

[25]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[26]  Chain‐Shu Hsu,et al.  Synthesis of conjugated polymers for organic solar cell applications. , 2009, Chemical reviews.

[27]  Gang Li,et al.  Doping of the Metal Oxide Nanostructure and its Influence in Organic Electronics , 2009 .

[28]  Jin Young Kim,et al.  Processing additives for improved efficiency from bulk heterojunction solar cells. , 2008, Journal of the American Chemical Society.

[29]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[30]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[31]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[32]  C. A. Walsh,et al.  Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.