Thermal Stress and Strain of Solar Cells in Photovoltaic Modules

The long-term stability of photovoltaic (PV) modules is largely influenced by the module’s ability to withstand thermal cycling between −40°C and 85°C. Due to different coefficients of thermal expansion (CTE) of the different module materials the change in temperature creates stresses. We quantify these thermomechanical stresses by performing a Finite-Element-analysis of a 60 cell module during thermal cycling. We therefore start by the experimental characterization of each material layer. In particular, the polymeric encapsulant is characterized by three alternative models in order to stepwise consider the time- and temperature-dependence in the simulation. Experiments performed with laminated samples are used to validate the computational model. We find that taking into account the viscoelasticity of the encapsulation layers gives the best agreement with experiments. The Finite-Element-analysis of the complete module shows that the solar cells are under high compressive stress of up to 76 MPa as they are sandwiched between the stiff front glass and the strongly contracting plastic back sheet. The non-symmetrical structure of the 5.55 mm thick module with glass being the thickest component (4 mm) leads to bending during the thermal cycle.

[1]  Ulrich Eitner,et al.  Use of digital image correlation technique to determine thermomechanical deformations in photovoltaic laminates: Measurements and accuracy , 2010 .

[2]  M. Kempe Evaluation of Encapsulant Materials for PV Applications , 2010 .

[3]  Nicholas W. Tschoegl,et al.  The Phenomenological Theory of Linear Viscoelastic Behavior: An Introduction , 1989 .

[4]  J. Ferry Viscoelastic properties of polymers , 1961 .

[5]  R. Landel,et al.  The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-Forming Liquids , 1955 .

[6]  D. V. Krevelen Properties of Polymers , 1990 .

[7]  U. Eitner,et al.  Measuring thermomechanical displacements of solar cells in laminates using digital image correlation , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[8]  Robert W. Cahn,et al.  Materials science and technology : a comprehensive treatment , 2000 .

[9]  N. Tschoegl The Phenomenological Theory of Linear Viscoelastic Behavior , 1989 .

[10]  A. Maldonado,et al.  Physical properties of ZnO:F obtained from a fresh and aged solution of zinc acetate and zinc acetylacetonate , 2006 .

[11]  T. J. McMahon,et al.  History of accelerated and qualification testing of terrestrial photovoltaic modules: A literature review , 2009 .

[12]  G. K. White,et al.  Linear thermal expansion measurements on silicon from 6 to 340 K , 1977 .

[13]  R B Roberts,et al.  Thermal expansion reference data: silicon 300-850 K , 1981 .

[14]  NON-LINEAR MECHANICAL PROPERTIES OF ETHYLENE-VINYL ACETATE (EVA) AND ITS RELEVANCE TO THERMOMECHANICS OF PHOTOVOLTAIC MODULES , 2010 .

[15]  J. Wohlgemuth,et al.  Reliability of EVA modules , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[16]  J. Greenwood Silicon in mechanical sensors , 1988 .