Hybrid Search for Faster Production and Safer Process Conditions in Friction Stir Welding

The objective of this paper is to investigate optimum process parameters and tool geometries in Friction Stir Welding (FSW) to minimize temperature difference between the leading edge of the tool probe and the work piece material in front of the tool shoulder, and simultaneously maximize traverse welding speed, which conflicts with the former objective. An evolutionary multi-objective optimization algorithm (i.e. NSGA-II), is applied to find multiple trade-off solutions followed by a gradient-based local search (i.e. SQP) to improve the convergence of the obtained Pareto-optimal front. In order to reduce the number of function evaluations in the local search procedure, the obtained nondominated solutions are clustered in the objective space and consequently, a postoptimality study is manually performed to find out some common design principles among those solutions. Finally, two reasonable design choices have been offered based on several process specific performance and cost related criteria.

[1]  Hisao Ishibuchi,et al.  Hybrid Evolutionary Algorithms , 2007 .

[2]  Kalyanmoy Deb,et al.  Automated discovery of vital knowledge from Pareto-optimal solutions: First results from engineering design , 2010, IEEE Congress on Evolutionary Computation.

[3]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[4]  Cem Celal Tutum,et al.  Multi-objective optimization of process parameters in friction stir welding , 2010, GECCO '10.

[5]  Cem Celal Tutum,et al.  A multi-objective optimization application in Friction Stir Welding: Considering thermo-mechanical aspects , 2010, IEEE Congress on Evolutionary Computation.

[6]  Aravind Srinivasan,et al.  Innovization: innovating design principles through optimization , 2006, GECCO.

[7]  Ajith Abraham,et al.  Hybrid Evolutionary Algorithms: Methodologies, Architectures, and Reviews , 2007 .

[8]  Jesper Henri Hattel,et al.  Thermal modelling of friction stir welding , 2008 .

[9]  Kalyanmoy Deb,et al.  Unveiling innovative design principles by means of multiple conflicting objectives , 2003 .

[10]  Martin P. Bendsøe,et al.  Estimation of the Welding Speed and Heat Input in Friction Stir Welding using Thermal Models and Optimization , 2007 .

[11]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[12]  Cem Celal Tutum,et al.  Optimization of Thermo-mechanical Conditions in Friction Stir Welding , 2010 .

[13]  L. Lasdon,et al.  On a bicriterion formation of the problems of integrated system identification and system optimization , 1971 .