Comparison of fracture test standards for a super pave dense-graded hot mix asphalt

[1]  Jd Landes,et al.  THE J INTEGRAL AS A FRACTURE CRITERION , 1972 .

[2]  J. Begley,et al.  The Effect of Specimen Geometry on J Ic , 1972 .

[3]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .

[4]  Robert L. Lytton,et al.  METHODOLOGY FOR PREDICTING THE REFLECTION CRACKING LIFE OF ASPHALT CONCRETE OVERLAYS , 1979 .

[5]  Rilem.  FMC 1 Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams , 1985 .

[6]  Rilem.  Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams , 1985 .

[7]  M. A. Mull,et al.  Fracture resistance characterization of chemically modified crumb rubber asphalt pavement , 2002 .

[8]  André Molenaar,et al.  SEMI-CIRCULAR BENDING TEST; SIMPLE BUT USEFUL? , 2002 .

[9]  Fujie Zhou,et al.  Upgraded Overlay Tester and Its Application to Characterize Reflection Cracking Resistance of Asphalt Mixtures , 2003 .

[10]  Xiaopeng Li,et al.  EVALUATION OF THE LOW TEMPERATURE FRACTURE RESISTANCE OF ASPHALT MIXTURES USING THE SEMI CIRCULAR BEND TEST (WITH DISCUSSION) , 2004 .

[11]  Fujie Zhou,et al.  Overlay Tester: A Rapid Performance Related Crack Resistance Test , 2005 .

[12]  Glaucio H. Paulino,et al.  Investigation of the Fracture Resistance of Hot-Mix Asphalt Concrete Using a Disk-Shaped Compact Tension Test , 2005 .

[13]  Glaucio H. Paulino,et al.  Investigation of the Fracture Resistance of Hot-Mix Asphalt Concrete Using a Disk-Shaped Compact Tension Test , 2005 .

[14]  G. H. Paulino,et al.  Disk-shaped compact tension test for asphalt concrete fracture , 2005 .

[15]  Louay N. Mohammad,et al.  Fracture Resistance Characterization of Superpave Mixtures Using the Semi-Circular Bending Test , 2005 .

[16]  Mihai O. Marasteanu,et al.  Investigation of Low Temperature Cracking in Asphalt Mixtures by Acoustic Emission , 2006 .

[17]  Baoshan Huang,et al.  Evaluation of Moisture Damage in Hot-Mix Asphalt Using Simple Peformance and Superpave Indirect Tension Tests , 2008 .

[18]  William G. Buttlar,et al.  Effect of Binder Type, Aggregate, and Mixture Composition on Fracture Energy of Hot-Mix Asphalt in Cold Climates , 2007 .

[19]  Fujie Zhou,et al.  A Balanced HMA Mix Design Procedure for Overlays (With Discussion) , 2007 .

[20]  Hyunwook Kim,et al.  Simulation of Fracture Behavior in Asphalt Concrete Using a Heterogeneous Cohesive Zone Discrete Element Model , 2008 .

[21]  R. E. Link,et al.  Evaluation of Semicircular Bending Test for Determining Tensile Strength and Stiffness Modulus of Asphalt Mixtures , 2009 .

[22]  Mihai O. Marasteanu,et al.  Using Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete , 2010 .

[23]  Björn Birgisson,et al.  The effect of polymer modification on hot mix asphalt fracture at tensile loading conditions , 2010 .

[24]  Mostafa A. Elseifi,et al.  Characterization of Fracture Properties of Asphalt Mixtures as Measured by Semicircular Bend Test and Indirect Tension Test , 2012 .

[25]  Eyad Masad,et al.  Applications of Advanced Models to Understand Behavior and Performance of Asphalt Mixtures. Introduction , 2012 .

[26]  Salvatore Sessa,et al.  Identification of mode-I cohesive parameters for bonded interfaces based on DCB test , 2013 .

[27]  J. Tejchman,et al.  Modelling of concrete fracture at aggregate level using FEM and DEM based on X-ray μCT images of internal structure , 2015 .

[28]  Krishna Prapoorna Biligiri,et al.  Fracture damage evaluation of asphalt mixtures using Semi-Circular Bending test based on fracture energy approach , 2015 .

[29]  Robert L. Lytton,et al.  Field Validation of Laboratory Tests to Assess Cracking Resistance of Asphalt Mixtures: An Experimental Design , 2016 .

[30]  Bernd Faust,et al.  Hot Mix Asphalt Materials Mixture Design And Construction , 2016 .