Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey

Abstract Thermal insulation is one of the most effective energy conservation measures for cooling and heating in buildings. Therefore, determining and selecting the optimum thickness of insulation is the main subject of many engineering investigations. In this study, the determination of optimum insulation thickness on external walls of buildings is comparatively analyzed based on annual heating and cooling loads. The transmission loads, calculated by using measured long-term meteorological data for selected cities, are fed into an economic model ( P 1 − P 2 method) in order to determine the optimum insulation thickness. The degree-hours method that is the simplest and most intuitive way of estimating the annual energy consumption of a building is used in this study. The results show that the use of insulation in building walls with respect to cooling degree-hours is more significant for energy savings compared to heating degree-hours in Turkey's warmest zone. The optimum insulation thickness varies between 3.2 and 3.8 cm; the energy savings varies between 8.47 and 12.19 $/m 2 ; and the payback period varies between 3.39 and 3.81 years depending on the cooling degree-hours. On the other hand, for heating load, insulation thickness varies between 1.6 and 2.7 cm, energy savings varies between 2.2 and 6.6 $/m 2 , and payback periods vary between 4.15 and 5.47 years.

[1]  Vice President,et al.  AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS INC. , 2007 .

[2]  Mohamed A. Habib,et al.  Database for building energy prediction in Saudi Arabia , 2003 .

[3]  N. Kyriakis,et al.  Heating and cooling degree-hours for Athens and Thessaloniki, Greece , 2005 .

[4]  Hüsamettin Bulut,et al.  Analysis of variable-base heating and cooling degree-days for Turkey , 2001 .

[5]  David J. Sailor,et al.  Simulations of annual degree day impacts of urban vegetative augmentation , 1998 .

[6]  William A. Beckman,et al.  Sol-air heating and cooling degree-days , 1983 .

[7]  M. S Söylemez,et al.  Optimum insulation thickness for refrigeration applications , 1999 .

[8]  V. Badescu,et al.  Degree-days, degree-hours and ambient temperature bin data from monthly-average temperatures (Romania) , 1999 .

[9]  R. Dear,et al.  Weather sensitivity in household appliance energy end-use , 2004 .

[10]  Bilal Akash,et al.  Some prospects of energy savings in buildings , 2001 .

[11]  William Chung,et al.  Benchmarking the energy efficiency of commercial buildings , 2006 .

[12]  Dorota Chwieduk,et al.  Towards sustainable-energy buildings , 2003 .

[13]  Afif Hasan,et al.  Optimizing insulation thickness for buildings using life cycle cost , 1999 .

[14]  Wan Ki Chow,et al.  Optimum insulation-thickness for thermal and freezing protection , 2005 .

[15]  G. M. Zaki,et al.  Cooling load response for building walls comprising heat storing and thermal insulating layers , 1991 .

[16]  M. Ruth,et al.  Regional energy demand and adaptations to climate change: Methodology and application to the state of Maryland, USA , 2006 .

[17]  Adrian Bejan,et al.  Two Fundamental Problems of Refrigerator Thermal Insulation Design , 1994 .

[18]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[19]  S. A. Al-Sanea,et al.  Optimum insulation thickness for building walls in a hot-dry climate , 2002 .

[20]  G. C. Bakos,et al.  Insulation protection studies for energy saving in residential and tertiary sector , 2000 .

[21]  Ali Bolatturk,et al.  Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey , 2006 .

[22]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .