Determination of activation barriers for the diffusion of sodium through CIGS thin‐film solar cells

We have determined the activation energies of sodium diffusion from the soda‐lime glass substrate through the Mo back‐contact layer, as well as through copper indium gallium diselenide (CIGS) deposited on the Mo back‐contact layer of CIGS thin‐film solar cells. The activation energies were determined by X‐ray photoelectron spectroscopy (XPS) to measure surface sodium concentrations before and after thermally induced diffusion. The activation energies were found to be similar for the diffusion of Na through the Mo/glass and CIGS/Mo/glass thin films, approximately 8·6 and 9·6 kcal/mol, respectively. Furthermore, the sodium diffusion was found to occur by annealing in an environment of 1·0×10−5 Torr of air, oxygen, or water vapor, but not in vacuum of less than 1×10−8 Torr. In addition, the diffusion of Na was found to occur faster in the presence of oxygen than in water under identical annealing conditions. Copyright © 2003 John Wiley & Sons, Ltd.

[1]  Rommel Noufi,et al.  High efficiency Cu(In,Ga)Se{sub 2} thin film solar cells without intermediate buffer layers , 1998 .

[2]  Hans-Werner Schock,et al.  Thin film photovoltaics , 1996 .

[3]  David Cahen,et al.  Effects of Sodium on Polycrystalline Cu(In,Ga)Se2 and Its Solar Cell Performance , 1998 .

[4]  E. Umbach,et al.  Influence of Na and H2O on the surface properties of Cu(In,Ga)Se2 thin films , 1997 .

[5]  Peter V. Meyers,et al.  The Future of CdTe Photovoltaics , 1995 .

[6]  David W. Niles,et al.  Direct observation of Na and O impurities at grain surfaces of CuInSe2 thin films , 1999 .

[7]  E. Umbach,et al.  Na‐induced effects on the electronic structure and composition of Cu(In,Ga)Se2 thin‐film surfaces , 1996 .

[8]  J. Fulghum,et al.  Na impurity chemistry in photovoltaic CIGS thin films: Investigation with x-ray photoelectron spectroscopy , 1997 .

[9]  A. Ennaoui,et al.  Chemical bath deposited Zn(Se,OH)x on Cu(In,Ga)(S,Se)2 for high efficiency thin film solar cells: growth kinetics, electronic properties, device performance and loss analysis , 2000 .

[10]  David L. King,et al.  Solar cell efficiency tables (Version 60) , 1997 .

[11]  W. Shafarman,et al.  Effect of substrate temperature and depostion profile on evaporated Cu(InGa)Se2 films and devices , 2000 .

[12]  A. Rockett,et al.  Na incorporation in Mo and CuInSe2 from production processes , 1999 .

[13]  Rommel Noufi,et al.  Perspective on High‐efficiency Cu(In, Ga)Se2‐based Thin‐film Solar Cells Fabricated by Simple, Scalable Processes , 1995 .