A three-axis autocollimator for detection of angular error motions of a precision stage

This paper presents a new autocollimator that can simultaneously detect the three-axis angular error motions (pitch, yaw, and roll errors) of a precision linear stage. A collimated laser beam from a laser diode is projected onto a grating reflector mounted on the stage. The reflected 0th-order diffracted beam is received by an autocollimation unit, which consists of a collimator objective and a quadrant photodiode, for detecting the pitch and yaw errors. The reflected 1st-order diffracted beam is received by another autocollimation unit for detecting the roll error. Experiments were carried out to evaluate the basic performance of the prototype sensor.

[1]  J. B. Bryan,et al.  The Abbé principle revisited: An updated interpretation , 1979 .

[2]  Tilo Pfeifer,et al.  Scales vs. laser interferometers performance and comparison of two measuring systems , 1993 .

[3]  J. Hoffmann,et al.  Long Range 3 D Scanning Tunnelling Microscopy , 2007 .

[4]  Masaji Sawabe,et al.  A new vacuum interferometric comparator for calibrating the fine linear encoders and scales , 2004 .

[5]  E.h. Manfred Week,et al.  Linear Magnetic Bearing and Levitation System for Machine Tools , 1998 .

[6]  A. E. Ennos,et al.  High accuracy profile measurement of quasi-conical mirror surfaces by laser autocollimation , 1982 .

[7]  C. R. Steinmetz,et al.  Sub-micron position measurement and control on precision machine tools with laser interferometry , 1990 .

[8]  Yoshikazu Arai,et al.  Measurement of multi-degree-of-freedom error motions of a precision linear air-bearing stage , 2006 .

[9]  Wolfgang Knapp,et al.  Measurement Uncertainty and Machine Tool Testing , 2002 .

[10]  Stuart T. Smith,et al.  Design evaluation of a single-axis precision controlled positioning stage , 2009 .

[12]  Dan J. Gordon,et al.  Precision machine tool X–Y stage utilizing a planar air bearing arrangement , 2010 .

[13]  Robert Schmitt,et al.  Geometric error measurement and compensation of machines : an update , 2008 .

[14]  Clemens Elster,et al.  Coupled distance sensor systems for high-accuracy topography measurement: Accounting for scanning stage and systematic sensor errors , 2006 .