Application of design analysis to solution generation: Hand-arm vibrations in foundation pile head removal in the construction industry

Impact power tools are still widely used by many professions. Users of these tools are exposed to high levels of both vibration and shock. Reported health effects due to hand-arm vibration are 'hand-arm vibration syndrome' (HAVS) and bone and joint injuries and disorders. In the construction industry a case study was conducted on one specific activity: removing concrete from the head of foundation piles. Pile heads are removed to allow the reinforcement rods to be connected to the rest of the foundation. Factors determining the vibration exposure were measured and the type and size of other occupational hazards were assessed qualitatively. The results showed that there was excessive exposure to vibration from the widely used hand-operated pneumatic drill as well as high exposure to other occupational hazards. The age of the drill, the make, the working pressure and the presence of a buffer ring have measurable effects on the level of vibration. But these adjustments only have a limited effect on the total workload. Instead of an exposure-oriented solution the present workload requires aource-ori- ented solutions. which are expected to be more effective. A systematic approach towards the generation of possible solutions was adopted following the individual steps of the 'problem- solving cycle', in combination with the design analysis technique. Design analysis is a method which can generate different types of solutions resulting in a reduction of the various hazards to an acceptable level. 0 1997 Elsevier Science Ltd. All rights reserved.

[1]  A. R. Hale.  The human paradox in technology and safety , 1985 .

[2]  Ronnie Lundström,et al.  Vibrating hand-held machines in the construction industry , 1992 .

[3]  Donald E. Wasserman.  The Control Aspects of Occupational Hand-Arm Vibration , 1989 .

[4]  Andrew Hale,et al.  Safety standards, risk analysis and decision making on prevention measures: Implications of some recent European legislation and standards : J of Occupat Accidents, 1990, 13.3, 213–231, 34 refs , 1991 .

[5]  A. Hale,et al.  Individual behaviour in the control of danger. , 1987 .

[6]  W. L. Badger,et al.  The Elements of Chemical Engineering , 1906, Nature.

[7]  Charles Higgins Kepner,et al.  The Rational Manager: A Systematic Approach to Problem Solving and Decision-Making , 1965 .

[8]  Effects of acute exposure to ultrahigh radiofrequency radiation on three antenna engineers. , 1997, Occupational and environmental medicine.

[9]  W. M. Keyserling,et al.  Back disorders and nonneutral trunk postures of automobile assembly workers. , 1991, Scandinavian journal of work, environment & health.

[10]  W Taylor,et al.  Hand-arm vibration syndrome: a new clinical classification and an updated British standard guide for hand transmitted vibration. , 1988, British journal of industrial medicine.

[11]  W Taylor,et al.  Lessons from hand-arm vibration syndrome research. , 1991, American journal of industrial medicine.

[12]  P Swuste,et al.  Prevention and control of chemical exposures in the rubber manufacturing industry in The Netherlands. , 1993, The Annals of occupational hygiene.

[13]  Andrew Hale,et al.  Safety standards, risk analysis and decision making on prevention measures: implications of some recent European legislation and standards , 1990 .

[14]  A Burdorf,et al.  Exposure to shock and vibration and symptoms in workers using impact power tools. , 1989, The Annals of occupational hygiene.

[15]  Michael J. Griffin,et al.  Handbook of Human Vibration , 1990 .

[16]  Andrew Hale,et al.  MODELLING OF SAFETY MANAGEMENT SYSTEMS , 1997 .