High-throughput resistivity apparatus for thin-film combinatorial libraries

An apparatus, capable of measuring the dc resistance versus temperature of a 49-member library prepared by thin-film deposition techniques was designed and tested. The library is deposited by dc magnetron sputtering onto 10.16cm×10.16cm alumina substrates on which are placed aluminum masks consisting of 8mm diam holes cut on a 7×7 grid, the center-to-center spacing being 10.15mm. Electrical contact to the library is made in a standard van der Pauw geometry using 196 spring-loaded, gold-coated pins, four pins for each member of the library. The temperature is controlled using a helium refrigerator in combination with a liquid-nitrogen radiation shield that greatly reduces radiative heating of the sample stage. With the radiation shield, the cold finger is able to sustain a minimum temperature of 7K and the sample stage a minimum temperature of 27K. The temperature (27–291K) dependent dc resistivity of a thin-film silver library of varying thickness (48–639nm) is presented to highlight the capabilities of t...

[1]  K. Müller.  Stress and microstructure of sputter‐deposited thin films: Molecular dynamics investigations , 1987 .

[2]  J. R. Sambles,et al.  The resistivity of thin metal films—Some critical remarks , 1983 .

[3]  J. D. Vries.  Surface scattering in thin evaporated gold double layers studied by in situ resistivity measurements , 1987 .

[4]  V. F. Zackay,et al.  Rapid Method for Determining Ternary‐Alloy Phase Diagrams , 1965 .

[5]  J.W.C. de Vries,et al.  Temperature and thickness dependence of the resistivity of thin polycrystalline aluminium, cobalt, nickel, palladium, silver and gold films , 1988 .

[6]  A R Plummer,et al.  Introduction to Solid State Physics , 1967 .

[7]  Peter G. Schultz,et al.  A Combinatorial Approach to Materials Discovery , 1995, Science.

[8]  J. Dahn,et al.  Economical sputtering system to produce large-size composition-spread libraries having linear and orthogonal stoichiometry variations , 2002 .

[9]  X. Xiang,et al.  COMBINATORIAL MATERIALS SYNTHESIS AND SCREENING: An Integrated Materials Chip Approach to Discovery and Optimization of Functional Materials , 1999 .

[10]  Allan D. Pierce,et al.  Physical acoustics : principles and methods , 1965 .

[11]  I. Takeuchi,et al.  A low-loss composition region identified from a thin-film composition spread of (Ba1−x−ySrxCay)TiO3 , 1999 .

[12]  G. Meaden,et al.  Electrical resistance of metals , 1965 .

[13]  J. Hanak.  The “multiple-sample concept” in materials research: Synthesis, compositional analysis and testing of entire multicomponent systems , 1970 .

[14]  H. Tizard.  The Passing World , 1948, Nature.

[15]  E. Quesnel,et al.  Characterization of silver films deposited by radio frequency magnetron sputtering , 1994 .

[16]  M. Blackman.  On the calculation of characteristic temperatures from the elastic constants , 1951 .

[17]  John Ziman,et al.  Electrons and Phonons: The Theory of Transport Phenomena in Solids , 2001 .

[18]  R. Eberle,et al.  Elastic properties of thin silver films: hexagonal model and influence of corrugation effects , 2002 .

[19]  J. Sambles,et al.  The electrical resistivity of gold films , 1982, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.