Nanomaterials for environmental studies: classification, reference material issues, and strategies for physico-chemical characterisation.

NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions: 1. What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies? 2. What reference materials should be developed for use in environmental and ecotoxicological studies? 3. Is it possible to group different nanomaterials into categories for consideration in environmental studies? Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below. The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known. There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO(2) nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time. No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be required to derive criteria that can be used to generate such categories, that would also include aspects of the material structure and physical behaviour.

[1]  Karluss Thomas,et al.  Research strategies for safety evaluation of nanomaterials, part VII: evaluating consumer exposure to nanoscale materials. , 2006, Toxicological sciences : an official journal of the Society of Toxicology.

[2]  Mark Crane,et al.  The ecotoxicology and chemistry of manufactured nanoparticles , 2008, Ecotoxicology.

[3]  Qasim Chaudhry,et al.  A multidisciplinary approach to the identification of reference materials for engineered nanoparticle toxicology , 2008 .

[4]  Hilla Peretz,et al.  The , 1966 .

[5]  Mark Crane,et al.  Ecotoxicity test methods and environmental hazard assessment for engineered nanoparticles , 2008, Ecotoxicology.

[6]  Kent E. Pinkerton,et al.  Meeting Report: Hazard Assessment for Nanoparticles—Report from an Interdisciplinary Workshop , 2007, Environmental health perspectives.

[7]  James F. Ranville,et al.  Nanoparticle analysis and characterization methodologies in environmental risk assessment of engineered nanoparticles , 2008, Ecotoxicology.

[8]  Julie W. Fitzpatrick,et al.  Principles for characterizing the potential human health effects from exposure to nanomaterials: elements of a screening strategy , 2005, Particle and Fibre Toxicology.

[9]  Scott C. Brown,et al.  Research strategies for safety evaluation of nanomaterials. Part VI. Characterization of nanoscale particles for toxicological evaluation. , 2006, Toxicological sciences : an official journal of the Society of Toxicology.

[10]  Steffen Foss Hansen,et al.  Late lessons from early warnings for nanotechnology. , 2008, Nature nanotechnology.

[11]  David B Warheit,et al.  How meaningful are the results of nanotoxicity studies in the absence of adequate material characterization? , 2008, Toxicological sciences : an official journal of the Society of Toxicology.

[12]  Irina Subbotina,et al.  Black carbon decomposition and incorporation into soil microbial biomass estimated by 14C labeling , 2009 .

[13]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[14]  B. Moudgil,et al.  Developing Experimental Approaches for the Evaluation of Toxicological Interactions of Nanoscale Materials , 2004 .

[15]  V. Colvin.  The potential environmental impact of engineered nanomaterials , 2003, Nature Biotechnology.

[16]  Craig A. Poland,et al.  Carbon nanotubes introduced into the abdominal cavity of mice show asbestos-like pathogenicity in a pilot study. , 2008, Nature nanotechnology.

[17]  R. Aitken,et al.  Manufacture and use of nanomaterials: current status in the UK and global trends. , 2006, Occupational medicine.

[18]  Jae-Hong Kim,et al.  Natural organic matter stabilizes carbon nanotubes in the aqueous phase. , 2007, Environmental science & technology.

[19]  Qasim Chaudhry,et al.  Considerations for environmental fate and ecotoxicity testing to support environmental risk assessments for engineered nanoparticles. , 2009, Journal of chromatography. A.

[20]  Jamie R. Lead,et al.  Aquatic Colloids and Nanoparticles: Current Knowledge and Future Trends , 2006 .

[21]  Steffen Foss Hansen,et al.  Categorization framework to aid hazard identification of nanomaterials , 2007 .

[22]  K. Kasemets,et al.  Toxicity of nanoparticles of CuO, ZnO and TiO2 to microalgae Pseudokirchneriella subcapitata. , 2009, The Science of the total environment.

[23]  Peter Jenkinson,et al.  Initial in vitro screening approach to investigate the potential health and environmental hazards of Envirox™ – a nanoparticulate cerium oxide diesel fuel additive , 2007, Particle and Fibre Toxicology.

[24]  Stephen M. Roberts,et al.  Characterization of the size, shape, and state of dispersion of nanoparticles for toxicological studies , 2007 .

[25]  Jamie R Lead,et al.  Nanomaterials in the environment: Behavior, fate, bioavailability, and effects , 2008, Environmental toxicology and chemistry.