Computational structural analysis based on intravascular ultrasound imaging before in vitro angioplasty: prediction of plaque fracture locations.

OBJECTIVES This in vitro study was designed to test the hypothesis that a structural analysis based on intravascular ultrasound images of atherosclerotic vessels obtained before angioplasty can be used to predict plaque fracture locations and balloon pressures required to cause fracture. BACKGROUND Intravascular ultrasound imaging performed before interventional procedures has potential for providing information useful for guiding therapeutic strategies. METHODS Intravascular imaging was performed on 16 atherosclerotic human iliac vessel segments obtained freshly at autopsy; balloon angioplasty was then performed with 1-min inflations at 2 atm, increasing in 2-atm increments until fracture of the lumen surface occurred. Fracture locations were confirmed by histopathologic examination. Structural analysis of these images was performed with a large strain finite element analysis of the image that calculated the distribution of stress in the vessel with 2 atm of lumen pressure. RESULTS Structural analysis demonstrated a total of 30 high circumferential stress regions in the vessels (mean 1.9 high stress regions/vessel). A total of 18 plaque fractures occurred in the 16 vessel segments. Of the 17 fractures that occurred in the 15 specimens with regions of high circumferential stress, 14 (82%) occurred at a high stress region (p < 0.0001). However, there was no significant relation between the peak stresses estimated by structural analysis and the ultimate balloon inflation pressure required to cause fracture. CONCLUSIONS Structural analysis based on intravascular ultrasound imaging performed before in vitro balloon angioplasty can predict the locations of plaque fracture that usually accompany angioplasty. However, these data suggest that intravascular ultrasound may not be useful for predicting the ultimate balloon inflation pressure necessary to cause fracture, possibly because of the variable fracture properties and microscopic structure of atherosclerotic tissues.

[1]  R N Vaishnav,et al.  Incremental formulations in vascular mechanics. , 1984, Journal of biomechanical engineering.

[2]  S Levine,et al.  Coronary angioplasty: clinical and angiographic follow-up. , 1985, The American journal of cardiology.

[3]  A. Grodzinsky,et al.  Structure‐Dependent Dynamic Mechanical Behavior of Fibrous Caps From Human Atherosclerotic Plaques , 1991, Circulation.

[4]  S Glagov,et al.  Vessel, Plaque, and Lumen Morphology after Transluminal Balloon Angioplasty: Quantitative Study in Distended Human Arteries , 1987, Arteriosclerosis.

[5]  R. Califf,et al.  Clinical trials of restenosis after coronary angioplasty. , 1991, Circulation.

[6]  M. Leon,et al.  Characterization of atherosclerotic lesions by intravascular ultrasound: possible role in unstable coronary syndromes and in interventional therapeutic procedures. , 1991, The American journal of cardiology.

[7]  G. V. R. Born,et al.  INFLUENCE OF PLAQUE CONFIGURATION AND STRESS DISTRIBUTION ON FISSURING OF CORONARY ATHEROSCLEROTIC PLAQUES , 1989, The Lancet.

[8]  Frederick J. Schoen,et al.  Prediction of mechanical properties of human atherosclerotic tissue by high-frequency intravascular ultrasound imaging. An in vitro study. , 1992 .

[9]  J. Isner,et al.  Combination Balloon‐Ultrasound Imaging Catheter for Percutaneous Transluminal Angioplasty: Validation of Imaging, Analysis of Recoil, and Identification of Plaque Fracture , 1991, Circulation.

[10]  M. Savage,et al.  Restenosis after coronary angioplasty: A multilvariate statistical model to relate lesion and procedure variables to restenosis☆ , 1991 .

[11]  C. Haudenschild,et al.  Influence of inflation pressure and balloon size on the development of intimal hyperplasia after balloon angioplasty. A study in the atherosclerotic rabbit. , 1989, Circulation.

[12]  M. Fishbein,et al.  A paradigm for restenosis based on cell biology: clues for the development of new preventive therapies. , 1991, Journal of the American College of Cardiology.

[13]  B. Meier,et al.  Higher balloon dilatation pressure in coronary angioplasty. , 1984, American heart journal.

[14]  Walter L. Henry,et al.  Intravascular Ultrasound Imaging of Human Coronary Arteries In Vivo: Analysis of Tissue Characterizations With Comparison to In Vitro Histological Specimens , 1991, Circulation.

[15]  Michael C. Fishbein,et al.  Histopathologic Validation of Angioscopy and Intravascular Ultrasound , 1991, Circulation.

[16]  J W Melvin,et al.  Failure properties of passive human aortic tissue. I--uniaxial tension tests. , 1982, Journal of biomechanics.

[17]  P. Serruys,et al.  Restenosis after coronary angioplasty: the paradox of increased lumen diameter and restenosis. , 1992, Journal of the American College of Cardiology.

[18]  R. Virmani,et al.  Plaque morphology and pathologic changes in arteries from patients dying after coronary balloon angioplasty. , 1990, Journal of the American College of Cardiology.

[19]  J. Griffith,et al.  Intravascular ultrasound cross-sectional arterial imaging before and after balloon angioplasty in vitro. , 1989, Circulation.

[20]  M. Whang.  Stress analysis of the diseased arterial cross-section , 1990 .

[21]  J. Tobis,et al.  Morphological Effects of Coronary Balloon Angioplasty In Vivo Assessed by Intravascular Ultrasound Imaging , 1992, Circulation.