Development and analysis of mineral based coatings for buildings and urban structures

Abstract Commonly used materials in the construction of the building facades located in warm climates, often entrap a great amount of heat from the incoming solar radiation, leading to a respective thermal increase in the interior. The aim of the present study is to examine mineral-based coatings as a passive solar technique that contributes to buildings’ energy efficiency. A series of mineral based samples are developed and tested. Their thermal performance is estimated by infrared thermography and surface temperature measurements. Their optical properties are also measured while the energy efficiency is quantified using simulation techniques. The results revealed that renders based on hydraulic and/or hydrated lime with additions of calcium carbonate powder, as well as mineral paints comprised either of lime wash or silicate minerals can behave as cool coatings and contribute to a significant reduction of the cooling demand in warm climates.

[1]  K. Pavlou,et al.  Recent progress on passive cooling techniques: Advanced technological developments to improve survivability levels in low-income households , 2007 .

[2]  Christina Diakaki,et al.  Numerical and experimental analysis of cool roofs application on a laboratory building in Iraklion, Crete, Greece , 2012 .

[3]  Agis M. Papadopoulos,et al.  Developing a new library of materials and structural elements for the simulative evaluation of buildings’ energy performance , 2008 .

[4]  Agis M. Papadopoulos,et al.  An assessment tool for the energy, economic and environmental evaluation of thermal insulation solutions , 2009 .

[5]  I. D. Watson,et al.  Simulation of surface urban heat islands under ‘ideal’ conditions at night part 2: Diagnosis of causation , 1991 .

[6]  F. Hernández-Olivares,et al.  Experimental assessment of commercial one-coat renders for buildings façades , 2011 .

[7]  H. Akbari,et al.  Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions , 2007 .

[8]  M. Zinzi.  Cool materials and cool roofs: Potentialities in Mediterranean buildings , 2010 .

[9]  Peter Walker,et al.  Building houses with local materials: means to drastically reduce the environmental impact of construction , 2001 .

[10]  H. Akbari,et al.  Long-term performance of high-albedo roof coatings , 1997 .

[11]  Tom Woolley,et al.  Green Building Handbook: Volume 1: A Guide to Building Products and their Impact on the Environment , 1998 .

[12]  R. Prado,et al.  Measurement of albedo and analysis of its influence the surface temperature of building roof materials , 2005 .

[13]  M. Santamouris,et al.  Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions , 2011 .

[14]  A. Rosenfeld,et al.  Practical issues for using solar-reflective materials to mitigate urban heat islands , 1998 .

[15]  Akira Hoyano,et al.  A 3D CAD-based simulation tool for prediction and evaluation of the thermal improvement effect of passive cooling walls in the developed urban locations , 2009 .

[16]  Maria Kolokotroni,et al.  The London Heat Island and building cooling design , 2007 .

[17]  Takashi Asaeda,et al.  Heat storage of pavement and its effect on the lower atmosphere , 1996 .

[18]  A. Synnefa,et al.  Development and testing of thermochromic coatings for buildings and urban structures , 2009 .

[19]  M. Santamouris,et al.  A study of the thermal performance of reflective coatings for the urban environment , 2006 .

[20]  Lambros T. Doulos,et al.  Passive cooling of outdoor urban spaces. The role of materials , 2004 .

[21]  Ana Cristian Magalhães,et al.  Experimental applications of mortars with pozzolanic additions: Characterization and performance evaluation , 2009 .

[22]  H. Akbari,et al.  Solar spectral optical properties of pigments—Part II: survey of common colorants , 2004 .

[23]  M. Santamouris,et al.  On the development, optical properties and thermal performance of cool colored coatings for the urban environment , 2007 .