A Review on Approaches for Condition Based Maintenance in Applications with Induction Machines Located Offshore

Published version of an article in the journal: Modeling, Identification and Control. Also available from the publisher at: http://dx.doi.org/10.4173/mic.2012.2.4 Open access

[1]  Torben J. Larsen,et al.  Gearbox loads caused by double contact simulated with HAWC2 , 2011 .

[2]  Wenxian Yang,et al.  Detecting Impulses in Mechanical Signals by Wavelets , 2004, EURASIP J. Adv. Signal Process..

[3]  Espen Nystad,et al.  Oil & Gas offshore/onshore Integrated Operations - introducing the Brage 2010+ project , 2007, 2007 IEEE 8th Human Factors and Power Plants and HPRCT 13th Annual Meeting.

[4]  F.C. Trutt,et al.  Condition monitoring of induction motor stator windings using electrically excited vibrations , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[5]  B. Bhushan,et al.  Handbook of Tribology: Materials, Coatings, and Surface Treatments , 1991 .

[6]  G. Stone,et al.  Electrical Insulation for Rotating Machines , 2003 .

[7]  Ian Jenkinson,et al.  The use of Bayesian network modelling for maintenance planning in a manufacturing industry , 2010, Reliab. Eng. Syst. Saf..

[8]  Jinkyu Yang,et al.  An online groundwall and phase-to-phase insulation quality assessment technique for AC-machine stator windings , 2006, IEEE Transactions on Industry Applications.

[9]  M. Dalva,et al.  A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals and oil refineries , 1994, Proceedings of IEEE Petroleum and Chemical Industry Technical Conference (PCIC '94).

[10]  Yiqing Lin,et al.  A simulation model for field service with condition-based maintenance , 2002, Proceedings of the Winter Simulation Conference.

[11]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[12]  M. Riera-Guasp,et al.  Validation of a new method for the diagnosis of rotor bar failures via wavelet transform in industrial induction machines , 2006, IEEE Transactions on Industry Applications.

[13]  Robert G. Parker,et al.  Nonlinear Dynamics of Planetary Gears Using Analytical and Finite Element Models , 2007 .

[14]  Wenxian Yang,et al.  Condition Monitoring of the Power Output of Wind Turbine Generators Using Wavelets , 2010, IEEE Transactions on Energy Conversion.

[15]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[16]  Aparna Gupta,et al.  Strategically optimum maintenance of monitoring‐enabled multi‐component systems using continuous‐time jump deterioration models , 2006 .

[17]  S. Loutridis.  Instantaneous energy density as a feature for gear fault detection , 2006 .

[18]  Joan Carletta,et al.  A Microfluidic Device for Wear Detection in Lubricants , 2008 .

[19]  Stephan Ebersbach,et al.  The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques , 2006 .

[20]  G.C. Stone.  Recent important changes in IEEE motor and generator winding insulation diagnostic testing standards , 2005, IEEE Transactions on Industry Applications.

[21]  Fulei Chu,et al.  Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography , 2004 .

[22]  A. Bahaj,et al.  Tribological design constraints of marine renewable energy systems , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[23]  A. Ometto,et al.  Induction motor current signature analysis to diagnostics, of stator short circuits , 2003, 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003..

[24]  Stéphane Mischler,et al.  A round robin on combined electrochemical and friction tests on alumina/stainless steel contacts in sulphuric acid , 2001 .

[25]  T.G. Habetler,et al.  A survey of testing and monitoring methods for stator insulation systems in induction machines , 2008, 2008 International Conference on Condition Monitoring and Diagnosis.

[26]  Ming J. Zuo,et al.  Mechanical Fault Detection Based on the Wavelet De-Noising Technique , 2004 .

[27]  Paula J. Dempsey.  A Comparison of Vibration and Oil Debris Gear Damage Detection Methods Applied to Pitting Damage , 2000 .

[28]  H. Henao,et al.  Simplified axial flux spectrum method to detect incipient stator inter-turn short-circuits in induction machine , 2004, 2004 IEEE International Symposium on Industrial Electronics.

[29]  Xie Zhengjun,et al.  An Integrated Fault Diagnosis Method of Gearboxes Using Oil Analysis and Vibration Analysis , 2007, 2007 8th International Conference on Electronic Measurement and Instruments.

[30]  H.A. Toliyat,et al.  Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review , 2005, IEEE Transactions on Energy Conversion.

[31]  G. T. Burstein,et al.  Observation of a threshold impact energy required to cause passive film rupture during slurry erosion of stainless steel , 2000 .

[32]  Amiya R Mohanty,et al.  Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform , 2008 .

[33]  S. Raadnui,et al.  Low-cost condition monitoring sensor for used oil analysis , 2005 .

[34]  Robert L. Norton,et al.  Machine Design: An Integrated Approach , 1996 .

[35]  T. G. Habetler,et al.  An Evaluation of Model-Based Stator Resistance Estimation for Induction Motor Stator Winding Temperature Monitoring , 2002, IEEE Power Engineering Review.

[36]  Wenying Huang,et al.  A novel detection method of motor broken rotor bars based on wavelet ridge , 2003 .

[37]  P. Garcia,et al.  Broken Rotor Bar Detection in Line-Fed Induction Machines Using Complex Wavelet Analysis of Startup Transients , 2007, 2007 IEEE Industry Applications Annual Meeting.

[38]  J. Kapler,et al.  Stator winding monitoring , 1998 .

[39]  Ilya TYAPIN,et al.  Comparison of Markov Theory and Monte Carlo Simulations for Analysis of Marine Operations Related to Installation of an Offshore Wind Turbine , 2011 .

[40]  Jeremi Regnier,et al.  Mechanical fault detection in induction motor drives through stator current monitoring - Theory and application examples , 2010 .

[41]  Zhongxiao Peng,et al.  An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis , 2003 .

[42]  Paul C. Paris,et al.  Fatigue crack initiation and growth on a steel in the very high cycle regime with sea water corrosion , 2010 .

[43]  Paula J. Dempsey.  Gear Damage Detection Using Oil Debris Analysis , 2001 .

[44]  Patrick Flandrin,et al.  Time-Frequency/Time-Scale Analysis , 1998 .

[45]  Margaret Stack,et al.  Some thoughts on neural network modelling of microabrasion–corrosion processes , 2008 .

[46]  Thomas G. Habetler,et al.  Transient model for induction machines with stator winding turn faults , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[47]  Hongzhou Wang,et al.  A survey of maintenance policies of deteriorating systems , 2002, Eur. J. Oper. Res..

[48]  D. Landolt,et al.  Corrosion and surface chemistry of metals , 2007 .

[49]  E. Wiedenbrug,et al.  Impulse testing and turn insulation deterioration in electric motors , 2003, Conference Record of the 2003 Annual Pulp and Paper Industry Technical Conference, 2003..

[50]  Zhongxiao Peng,et al.  A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques , 2005 .

[51]  Robert G. Parker,et al.  PLANETARY GEAR PARAMETRIC INSTABILITY CAUSED BY MESH STIFFNESS VARIATION , 2002 .

[52]  John Marshall,et al.  Atomic Spectrometry Update—Industrial Analysis: Metals, Chemicals and Advanced Materials , 1989 .

[53]  Inmaculada Zamora,et al.  Techniques for Online Diagnosis of Stator Shorted Turns in Induction Motors , 2006 .

[54]  Ingrid Bouwer Utne,et al.  A structured approach to improved condition monitoring , 2012 .

[55]  Jayantha P. Liyanage.  Integrated e-Operations-e-Maintenance: Applications in North Sea Offshore Assets , 2008 .

[56]  M. Choux,et al.  Leakage-detection in blade pitch control systems for wind turbines , 2012, 2012 Proceedings Annual Reliability and Maintainability Symposium.

[57]  Ken Maynard,et al.  Application of sensor fusion and signal classification techniques in a distributed machinery condition monitoring system , 2000, SPIE Defense + Commercial Sensing.

[58]  M. Riera-Guasp,et al.  The Use of the Wavelet Approximation Signal as a Tool for the Diagnosis of Rotor Bar Failures , 2005, IEEE Transactions on Industry Applications.

[59]  G. C. Stone,et al.  Advancements during the past quarter century in on-line monitoring of motor and generator winding insulation , 2002 .

[60]  Robert G. Parker,et al.  Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration , 1999 .

[61]  Eui-Sung Yoon,et al.  Wear monitoring based on the analysis of lubricant contamination by optical ferroanalyzer , 2003 .

[62]  Wenyi Liu,et al.  Wind turbine fault diagnosis based on Morlet wavelet transformation and Wigner-Ville distribution , 2010 .

[63]  L. McLaughlin,et al.  Cost-effective condition-based maintenance using markov decision processes , 2006, RAMS '06. Annual Reliability and Maintainability Symposium, 2006..

[64]  Yang Yu,et al.  Time–energy density analysis based on wavelet transform , 2005 .

[65]  T.G. Habetler,et al.  A survey of efficiency-estimation methods for in-service induction motors , 2006, IEEE Transactions on Industry Applications.

[66]  D. Roger,et al.  Proposition of a new method for in-service monitoring of the aging of stator winding insulation in AC motors , 2006, IEEE Transactions on Energy Conversion.

[67]  M.-A. Garnero,et al.  Optimization of bearing-inspection intervals , 1998, Annual Reliability and Maintainability Symposium. 1998 Proceedings. International Symposium on Product Quality and Integrity.

[68]  Peter Tavner,et al.  Reliability analysis for wind turbines , 2007 .

[69]  T.G. Habetler,et al.  A Sensorless Adaptive Stator Winding Temperature Estimator for Mains-Fed Induction Machines With Continuous-Operation Periodic Duty Cycles , 2006, IEEE Transactions on Industry Applications.

[70]  T. G. Habetler,et al.  Insulation failure prediction in AC machines using line-neutral voltages , 1998 .

[71]  W. T. Thomson,et al.  Current signature analysis to detect induction motor faults , 2001 .

[72]  Sverre William Stenvaag,et al.  Integrated Operations - A Key Enabler To Operational Excellence In Maintenance Management Of FPSOs , 2008 .

[73]  Samuel H. Huang,et al.  System health monitoring and prognostics — a review of current paradigms and practices , 2006 .

[74]  Simon M. Jessop,et al.  A Model-Based Mission Planning and Decision Support Tool , 2009 .

[75]  G.C. Stone,et al.  Electrical insulation for rotating machines-design, evaluation, aging, testing, and repair - Book Review , 2004, IEEE Electrical Insulation Magazine.

[76]  J. Edmonds,et al.  Detection of precursor wear debris in lubrication systems , 2000, 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484).

[77]  Lin Ma,et al.  Best basis-based intelligent machine fault diagnosis , 2005 .

[78]  B. Drinkwater,et al.  Monitoring of Lubricant Film Failure in a Ball Bearing Using Ultrasound , 2006 .

[79]  J. Piotrowski,et al.  Shaft Alignment Handbook , 1986 .

[80]  S. Butterfield,et al.  Improving Wind Turbine Gearbox Reliability , 2007 .

[81]  L. Rodriguez,et al.  Application of latent nestling method using Coloured Petri Nets for the Fault Diagnosis in the wind turbine subsets , 2008, 2008 IEEE International Conference on Emerging Technologies and Factory Automation.

[82]  Hee-Dong Kim,et al.  Comparison of off-line and on-line partial discharge for large motors , 2002, Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316).

[83]  Peter Tavner,et al.  Machine and Converter Reliabilities in Wind Turbines , 2006 .

[84]  T Kawazoe,et al.  Corrosive Wear Testing of Metals in Seawater , 2001 .

[85]  E. J. Wiggelinkhuizen,et al.  Assessment of Condition Monitoring Techniques for Offshore Wind Farms , 2008 .

[86]  D. Landolt,et al.  Electrochemical and materials aspects of tribocorrosion systems , 2006 .

[87]  J. Williams,et al.  Wear debris and associated wear phenomena—fundamental research and practice , 2000 .

[88]  R. M. Tallam,et al.  A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix , 2003 .

[89]  Roy Johnsen,et al.  Modeling the multi-degradation mechanisms of combined tribocorrosion interacting with static and cyclic loaded surfaces of passive metals exposed to seawater , 2010 .

[90]  Chee Keong Tan,et al.  Diagnostics and prognostics with Acoustic Emission, Vibration and Spectrometric Oil Analysis for spur gears; a comparative study , 2005 .

[91]  Eivind H. Okstad,et al.  Implementing Integrated Operations in a Mobile Offshore Production Service Provider , 2010 .

[92]  N. Bethel,et al.  IDENTIFYING MOTOR DEFECTS THROUGH FAULT ZONE ANALYSIS , 1999 .

[93]  Eric R. Ziegel,et al.  Statistical Methods for the Reliability of Repairable Systems , 2001, Technometrics.

[94]  Thomas W. Rauber,et al.  Rolling element bearing fault diagnosis in rotating machines of oil extraction rigs , 2009, 2009 17th European Signal Processing Conference.

[95]  Haritha Saranga.  Opportunistic maintenance using genetic algorithms , 2004 .

[96]  Robert G. Parker,et al.  Dynamic modeling and analysis of a spur planetary gear involving tooth wedging and bearing clearance nonlinearity , 2010 .

[97]  B. Singh,et al.  A review of stator fault monitoring techniques of induction motors , 2005, IEEE Transactions on Energy Conversion.