Simultaneous process and control system design for grade transition in styrene polymerization

Abstract We present a comprehensive approach to the simultaneous design and control of a continuous stirred tank reactor (CSTR) for styrene solution polymerization that must be able to produce different polymer grades. The resulting tool allows simultaneous selection of the polymerization equipment, the multivariable feedforward–feedback controller's structure and tuning parameters, the steady states and the transition paths between them. For this purpose a multiobjective optimization is implemented to minimize the annualized reactor cost, the operating costs, the production of off-specification polymer and the transition time between steady states. Trade-offs between the sometimes conflicting objectives are dealt with by the optimization. Unlike many previous grade transition studies, steady states are not known a priori. The only known parameters are the target molecular weights to be produced at each steady state. We have analyzed three different scenarios, and propose practical criteria for selecting the most reasonable optimum when the solution is not unique.

[1]  Ajay K. Ray,et al.  Optimization of nonvaporizing nylon 6 reactors with stopping conditions and end‐point constraints , 1986 .

[2]  Francis J. Doyle,et al.  Polymer grade transition control using advanced real-time optimization software , 2004 .

[3]  J. D. Perkins,et al.  A case study in simultaneous design and control using rigorous, mixed-integer dynamic optimization models , 2002 .

[4]  Kyu Yong Choi,et al.  Analysis of steady state of free radical solution polymerization in a continuous stirred tank reactor , 1986 .

[5]  E. F. Costa,et al.  On the numerical solution and optimization of styrene polymerization in tubular reactors , 2003, Comput. Chem. Eng..

[6]  Ajay K. Ray,et al.  Optimization of Nonvaporizing Nylon 6 Reactors with Stopping Conditions , 1985 .

[7]  Sirish L. Shah,et al.  Computer optimal control of batch polymerization reactors , 1987 .

[8]  Ajay K. Ray,et al.  APPLICATIONS OF MULTIOBJECTIVE OPTIMIZATION IN CHEMICAL ENGINEERING , 2000 .

[9]  Howard P. Isermann,et al.  Operability of chemical reactors : multiplicity behavior of a jacketed styrene polymerization reactor , 1998 .

[10]  José Carlos Pinto,et al.  A survey of advanced control of polymerization reactors , 1996 .

[11]  Chonghun Han,et al.  Plantwide Optimal Grade Transition for an Industrial High-Density Polyethylene Plant , 2003 .

[12]  M. F. Malone,et al.  Polymer process design—I. Continuous production of chain growth homopolymers , 1990 .

[13]  E. Lima,et al.  Monitoring and control of styrene solution polymerization using NIR spectroscopy , 2003 .

[14]  Klavs F. Jensen,et al.  On‐line molecular weight distribution estimation and control in batch polymerization , 1994 .

[15]  Adriana Brandolin,et al.  High pressure tubular reactors for ethylene polymerization optimization aspects , 1991 .

[16]  Hiroya Seki,et al.  Optimal grade transition control for polymerization reactors , 2000 .

[17]  Coleman B. Brosilow,et al.  Nonlinear model predictive control of styrene polymerization at unstable operating points , 1990 .

[18]  Dhananjay Kumar Srivastava,et al.  Optimization of a tubular nylon 6 reactor with radial gradients , 1991 .

[19]  James B. Rawlings,et al.  Target Linearization and Model Predictive Control of Polymerization Processes , 2003 .

[20]  G. Stephanopoulos,et al.  Multiobjective dynamic optimization of semibatch copolymerization reactors , 1982 .

[21]  Robert F. T. Stepto,et al.  Mission and challenges of polymer science and technology , 2003 .

[22]  James M. Douglas,et al.  A hierarchical decision procedure for process synthesis , 1985 .

[23]  L. Biegler,et al.  Large-scale dynamic optimization for grade transitions in a low density polyethylene plant , 2002 .

[24]  J. A. Bandoni,et al.  Integrated flexibility and controllability analysis in design of chemical processes , 1997 .

[25]  Roberto Guardani,et al.  Neural network based approach for optimization of industrial chemical processes , 2000 .

[26]  H. F. Wang,et al.  Interactions and multivariable design of STATCOM AC and DC voltage control , 2003 .

[27]  Efstratios N. Pistikopoulos,et al.  Optimal grade transition and selection of closed-loop controllers in a gas-phase olefin polymerization fluidized bed reactor , 2003 .

[28]  Chandan Guria,et al.  Multi-objective optimal synthesis and design of froth flotation circuits for mineral processing using the Jumping gene adaptation of genetic algorithm , 2005 .

[29]  H. Rhee,et al.  An experimental study for property control in a continuous styrene polymerization reactor using a polynomial ARMA model , 2002 .

[30]  Kee J. Kim.  Modeling and Control of Continuous Free Radical Polymerization Reactors , 1991 .

[31]  B. Bequette,et al.  Product property and production rate control of styrene polymerization , 2002 .

[32]  J. Macgregor,et al.  Optimal Grade Transitions in a Gas Phase Polyethylene Reactor , 1992 .

[33]  Mariano Asteasuain,et al.  EFFECT OF MULTIPLE FEEDINGS IN THE OPERATION OF A HIGH-PRESSURE POLYMERIZATION REACTOR FOR ETHYLENE POLYMERIZATION , 2001 .

[34]  Christodoulos A. Floudas,et al.  Interaction of Design and Control: Optimization with Dynamic Models , 1998 .

[35]  Shrikant A. Bhat,et al.  SIMULATION AND OPTIMIZATION OF THE CONTINUOUS TOWER PROCESS FOR STYRENE POLYMERIZATION , 2004 .

[36]  Timothy F. L. McKenna.  Computer aided process design: Short-cut design for polymer production , 1996 .

[37]  Christodoulos A. Floudas,et al.  Analyzing the interaction of design and control—1. A multiobjective framework and application to binary distillation synthesis , 1994 .

[38]  W. Harmon Ray,et al.  Optimal-grade transition strategies for multistage polyolefin reactors , 1999 .

[39]  Ioannis K. Kookos,et al.  An Algorithm for Simultaneous Process Design and Control , 2001 .

[40]  Mariano Asteasuain,et al.  Molecular weight distributions in styrene polymerization with asymmetric bifunctional initiators , 2004 .

[41]  R. H. M. Simon,et al.  Technology of Styrenic Polymerization Reactors and Processes , 1979 .