Folding of fiber composites with a hyperelastic matrix

This paper presents an experimental and numerical study of the folding behavior of thin composite materials consisting of carbon fibers embedded in a silicone matrix. The soft matrix allows the fibers to microbuckle without breaking and this acts as a stress relief mechanism during folding, which allows the material to reach very high curvatures. The experiments show a highly non-linear moment vs. curvature relationship, as well as strain softening under cyclic loading. A finite element model has been created to study the micromechanics of the problem. The fibers are modeled as linear-elastic solid elements distributed in a hyperelastic matrix according to a random arrangement based on experimental observations. The simulations obtained from this model capture the detailed micromechanics of the problem and the experimentally observed non-linear response. The proposed model is in good quantitative agreement with the experimental results for the case of lower fiber volume fractions but in the case of higher volume fractions the predicted response is overly stiff.

[1]  R. Pyrz.  Correlation of Microstructure Variability and Local Stress Field in Two-Phase Materials , 1994 .

[2]  Rintoul,et al.  Reconstruction of the Structure of Dispersions , 1997, Journal of colloid and interface science.

[3]  S. Pellegrino,et al.  Constitutive modeling of fiber composites with a soft hyperelastic matrix , 2012 .

[4]  Sergio Pellegrino,et al.  Carbon Fibre Reinforced Plastic Tape Springs , 2004 .

[5]  Norman A. Fleck,et al.  Compressive Failure of Fiber Composites , 1997 .

[6]  Sanjay Govindjee,et al.  A micro-mechanically based continuum damage model for carbon black-filled rubbers incorporating Mullins' effect , 1991 .

[7]  Alan N. Gent,et al.  Internal rupture of bonded rubber cylinders in tension , 1961, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[8]  R. Parnes,et al.  Buckling of nano-fibre reinforced composites: a re-examination of elastic buckling , 2002 .

[9]  R. Ogden.  Large Deformation Isotropic Elasticity—On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids , 1973 .

[10]  O. Lopez-Pamies,et al.  On the overall behavior, microstructure evolution, and macroscopic stability in reinforced rubbers at large deformations: II—Application to cylindrical fibers , 2006 .

[11]  Analysis Techniques for Shape-Memory Composite Structures , 2007 .

[12]  Juan M. Mejia-Ariza,et al.  Manufacture and Experimental Analysis of a Concentrated Strain Based Deployable Truss Structure , 2006 .

[13]  Ray W. Ogden,et al.  A constitutive model for the Mullins effect with permanent set in particle-reinforced rubber , 2004 .

[14]  Mark Lake,et al.  A STUDY OF THE BENDING MECHANICS OF ELASTIC MEMORY COMPOSITES , 2004 .

[15]  Martin M. Mikulas,et al.  SOME MICROMECHANICS CONSIDERATIONS OF THE FOLDING OF RIGIDIZABLE COMPOSITE MATERIALS , 2001 .

[16]  Sergio Pellegrino,et al.  Composite Tube Hinges , 2005 .

[17]  M. Lake,et al.  A Review of Classical Fiber Microbuckling Analytical Solutions for use with Elastic Memory Composites , 2006 .

[18]  Ray W. Ogden,et al.  Instabilities and loss of ellipticity in fiber-reinforced compressible non-linearly elastic solids under plane deformation , 2003 .

[19]  Alan N. Gent,et al.  Elastic instabilities in rubber , 2005 .

[20]  Fredrik Rehnmark,et al.  Development of a Deployable Nonmetallic Boom for Reconfigurable Systems of Small Spacecraft , 2007 .

[21]  David J. Wagg,et al.  50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, 2009 , 2009 .

[22]  S. Pellegrino.  Biaxial Bending Failure Locus for Woven-Thin-Ply Carbon Fibre Reinforced Plastic Structures , 2005 .

[23]  O Soykasap,et al.  Micromechanical Models for Bending Behavior of Woven Composites , 2006 .

[24]  Mark S. Lake,et al.  Qualification of Elastic Memory Composite Hinges for Spaceflight Applications , 2006 .

[25]  O. Lopez-Pamies,et al.  A general hyperelastic model for incompressible fiber-reinforced elastomers , 2009 .

[26]  Grégory Chagnon,et al.  Analysis of the isotropic models of the Mullins effect based on filled silicone rubber experimental results , 2010 .

[27]  Y. Fung,et al.  Biomechanics: Mechanical Properties of Living Tissues , 1981 .

[28]  J. Merodio,et al.  Material instabilities in fiber-reinforced nonlinearly elastic solids under plane deformation , 2002 .

[29]  M. Sato.  [Mechanical properties of living tissues]. , 1986, Iyo denshi to seitai kogaku. Japanese journal of medical electronics and biological engineering.

[30]  Grégory Chagnon,et al.  Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber , 2008 .

[31]  Sergio Pellegrino,et al.  New concepts and reflecting materials for space borne large deployable reflector antennas , 2005 .

[32]  G. Holzapfel,et al.  Three-dimensional modeling and computational analysis of the human cornea considering distributed collagen fibril orientations. , 2008, Journal of biomechanical engineering.

[33]  Javier Segurado,et al.  Finite deformation of incompressible fiber-reinforced elastomers: A computational micromechanics approach , 2009 .

[34]  Stefan Müller,et al.  Homogenization of nonconvex integral functionals and cellular elastic materials , 1987 .

[35]  O. Lopez-Pamies,et al.  Fiber-reinforced hyperelastic solids: a realizable homogenization constitutive theory , 2010 .

[36]  Kirtland Afb,et al.  ELASTIC MEMORY COMPOSITE MATERIAL: AN ENABLING TECHNOLOGY FOR FUTURE FURLABLE SPACE STRUCTURES , 2005 .

[37]  Pedro Ponte Castañeda.  Second-order homogenization estimates for nonlinear composites incorporating field fluctuations: I—theory , 2002 .

[38]  Sergio Pellegrino,et al.  Tape-Spring Rolling Hinges , 2002 .

[39]  G. Holzapfel,et al.  Three-Dimensional Modeling and Computational Analysis of the Human Cornea Considering Distributed Collagen Fibril , 2008 .

[40]  N. Triantafyllidis,et al.  Homogenization of nonlinearly elastic materials, microscopic bifurcation and macroscopic loss of rank-one convexity , 1993 .

[41]  J. Grandidier,et al.  Towards a numerical model of the compressive strength for long fibre composites , 1999 .

[43]  J. Segurado,et al.  Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers , 2009 .

[44]  R. Pyrz.  Quantitative description of the microstructure of composites. Part I: Morphology of unidirectional composite systems , 1994 .

[45]  William H. Francis.  MECHANICS OF POST-MICROBUCKLED COMPLIANT-MATRIX COMPOSITES , 2008 .

[46]  A. Pandolfi,et al.  A model for the human cornea: constitutive formulation and numerical analysis , 2006, Biomechanics and modeling in mechanobiology.

[47]  R. Ogden,et al.  A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models , 2000 .

[48]  J. Grandidier,et al.  A structural approach of plastic microbuckling in long fibre composites: comparison with theoretical and experimental results , 2001 .

[49]  C. Gardin,et al.  Structure effect and microbuckling , 1996 .

[50]  Erich Wehrle,et al.  Large Shell-Membrane Space Reflectors , 2010 .