Influence of the Teflon loading in the gas diffusion layer of PBI-based PEM fuel cells

The influence of the PTFE content in commercial Toray graphite paper gas diffusion layer (GDL) on the performance of a PBI-based polymer electrolyte membrane fuel cell (PEMFC) has been studied. These materials have been characterised by evaluating the porosity, pore size distribution, SEM micrographs, hydrophobicity, air permeability and electrical resistance. Fuel cell results show that the lower the Teflon content, the better the cell performance and the lower the losses when oxygen was replaced by air. These results led to non-Teflonized carbon paper to be postulated as the most suitable candidate, provided that its mechanical integrity can be maintained throughout the whole process of preparation and testing of the MEA. However, some practical problems with this type of commercial non-Teflonized carbon paper were experienced in this work and led to damage of the support. The detrimental effects are described and discussed. As conclusion, the use of a minimally PTFE-loaded (10%) carbon paper is suggested because the inclusion of this level of Teflon improved properly the mechanical properties of the carbon support and only caused a very small drop in the performance.

[1]  Torsten Berning,et al.  Improving the performance of high-temperature PEM fuel cells based on PBI electrolyte , 2006 .

[2]  EunAe Cho,et al.  Influence of cathode gas diffusion media on the performance of the PEMFCs , 2004 .

[3]  Huamin Zhang,et al.  A novel sintering resistant and corrosion resistant Pt4ZrO2/C catalyst for high temperature PEMFCs , 2006 .

[4]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[5]  Philip C.H. Yu,et al.  A discussion on potentials of saving energy use for commercial buildings in Hong Kong , 2007 .

[6]  Falin Chen,et al.  Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell , 2003 .

[7]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[8]  Tae-Hee Lee,et al.  A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC , 2004 .

[9]  G. Squadrito,et al.  Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes , 2001 .

[10]  A. Shukla,et al.  Effect of diffusion-layer morphology on the performance of polymer electrolyte fuel cells operating at atmospheric pressure , 2000 .

[11]  David Blackwell,et al.  Water flow in the gas diffusion layer of PEM fuel cells , 2005 .

[12]  O. Savadogo.  Emerging membranes for electrochemical systems: Part II. High temperature composite membranes for polymer electrolyte fuel cell (PEFC) applications☆ , 2004 .

[13]  Ronghuan He,et al.  PBI‐Based Polymer Membranes for High Temperature Fuel Cells – Preparation, Characterization and Fuel Cell Demonstration , 2004 .

[14]  Andrew Higier,et al.  Effect of gas diffusion layer compression on PEM fuel cell performance , 2006 .

[15]  A. Shukla,et al.  Effect of Diffusion-Layer Morphology on the Performance of Solid-Polymer-Electrolyte Direct Methanol Fuel Cells , 2002 .

[16]  Ravindra Datta,et al.  Performance analysis and impedance spectral signatures of high temperature PBI–phosphoric acid gel membrane fuel cells , 2006 .

[17]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[18]  G. Squadrito,et al.  Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs , 1999 .

[19]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[20]  A. Morin,et al.  Characterization of PEMFCs gas diffusion layers properties , 2006 .

[21]  Göran Lindbergh,et al.  Flooding of Gas Diffusion Backing in PEFCs Physical and Electrochemical Characterization , 2004 .

[22]  M. Hori,et al.  Novel gas diffusion layer with water management function for PEMFC , 2004 .

[23]  Won-Yong Lee,et al.  Effect of pore structure of catalyst layer in a PEMFC on its performance , 2003 .

[24]  Deborah J. Jones,et al.  Recent advances in the functionalisation of polybenzimidazole and polyetherketone for fuel cell applications , 2001 .

[25]  Huamin Zhang,et al.  Pt4ZrO2/C cathode catalyst for improved durability in high temperature PEMFC based on H3PO4 doped PBI , 2007 .

[26]  Loreto Daza,et al.  Electrode permeability and flow-field configuration: influence on the performance of a PEMFC , 2003 .

[27]  P. Cañizares,et al.  PBI-based polymer electrolyte membranes fuel cells: Temperature effects on cell performance and catalyst stability , 2007 .

[28]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[29]  Wei-Mon Yan,et al.  Effects of flow distributor geometry and diffusion layer porosity on reactant gas transport and performance of proton exchange membrane fuel cells , 2004 .

[30]  J. Moreira.  Influence of the hydrophobic material content in the gas diffusion electrodes on the performance of a PEM fuel cell , 2003 .

[31]  E. Ticianelli,et al.  Effects of the cathode gas diffusion layer characteristics on the performance of polymer electrolyte fuel cells , 2002 .

[32]  Tae-Hee Lee,et al.  Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells , 2002 .

[33]  E. Ticianelli,et al.  Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells , 2002 .

[34]  P. Cañizares,et al.  Synthesis and characterisation of poly[2,2-(m-phenylene)-5,5-bibenzimidazole] as polymer electrolyte membrane for high temperature PEMFCs , 2006 .

[35]  J. Jindra,et al.  Porosity and catalyst utilization of thin layer cathodes in air operated PEM-fuel cells , 1998 .

[36]  Zhigang Qi,et al.  Enhancement of PEM fuel cell performance by steaming or boiling the electrode , 2002 .

[37]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[38]  Jesse S. Wainright,et al.  Acid-doped polybenzimidazoles : a new polymer electrolyte , 1995 .

[39]  I. Hsing,et al.  Influence of anode diffusion layer on the performance of a liquid feed direct methanol fuel cell by AC impedance spectroscopy , 2006 .

[40]  Zhigang Shao,et al.  The stability of Pt/C catalyst in H3PO4/PBI PEMFC during high temperature life test , 2007 .

[41]  E. Passalacqua,et al.  Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[42]  P. Wilde,et al.  Structural and Physical Properties of GDL and GDL/BPP Combinations and their Influence on PEMFC Performance , 2004 .

[43]  Chaoyang Wang,et al.  Development of high-power electrodes for a liquid-feed direct methanol fuel cell , 2003 .

[44]  H. Ha,et al.  Investigation of oxygen gain in polymer electrolyte membrane fuel cells , 2004 .

[45]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[46]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[47]  Ronghuan He,et al.  Preparation and operation of gas diffusion electrodes for high-temperature proton exchange membrane fuel cells , 2007 .

[48]  J. Song,et al.  Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method , 2001 .

[49]  T. Berning,et al.  Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes , 2007 .