Development and calibration of low cost MEMS IMU for UAV applications

In this paper, an affordable and reliable low-cost inertial measurement unit (IMU) is designed using commercial off-the-shelf (COTS) components. Micro electro-mechanical systems (MEMS) accelerometers and rate-gyros are used, and a methodology for calibrating the resulting IMU is developed when the precise orientation of the IMU is unknown. The proposed methodology requires no precise mechanical platform for the accelerometer while as simple rotating table is utilized for the rate-gyros calibration. The proposed calibration methods utilize the fact that ideally the norm of the measured output of the accelerometer and gyro cluster is equal to the magnitude of applied force and rotational velocity, respectively. Least squares method is used to evaluate the accelerometers and gyros model coefficients.

[1]  Salah Sukkarieh,et al.  Real-Time Navigation, Guidance, and Control of a UAV Using Low-Cost Sensors , 2003, FSR.

[2]  Z. C. Wu,et al.  Gravity based online calibration for monolithic triaxial accelerometers' gain and offset drift , 2002, Proceedings of the 4th World Congress on Intelligent Control and Automation (Cat. No.02EX527).

[3]  Hugh Durrant-Whyte,et al.  Initial calibration and alignment of low‐cost inertial navigation units for land vehicle applications , 1999 .

[4]  Xiaoji Niu,et al.  The Development of a Low-cost MEMS IMU/GPS Navigation System for Land Vehicles Using Auxiliary Velocity Updates in the Body Frame , 2005 .

[5]  John Weston,et al.  Strapdown Inertial Navigation Technology, Second Edition , 2005 .

[6]  M.F. Golnaraghi,et al.  Initial calibration of an inertial measurement unit using an optical position tracking system , 2004, PLANS 2004. Position Location and Navigation Symposium (IEEE Cat. No.04CH37556).

[7]  J. C. Hung,et al.  Calibration of accelerometer triad of an IMU with drifting Z-accelerometer bias , 1989, Proceedings of the IEEE National Aerospace and Electronics Conference.

[8]  Munther A. Dahleh,et al.  Avionics system for a small unmanned helicopter performing aggressive maneuvers , 2000, 19th DASC. 19th Digital Avionics Systems Conference. Proceedings (Cat. No.00CH37126).

[9]  Bradford W. Parkinson,et al.  Flight Tests of an Unmanned Air Vehicle with Integrated Multi-Antenna GPS Receiver and IMU: Towards a Testbed for Distributed Control and Formation Flight , 1999 .

[10]  Robert M. Rogers,et al.  Applied Mathematics in Integrated Navigation Systems , 2000 .

[11]  John Weston,et al.  Strapdown Inertial Navigation Technology , 1997 .

[12]  Douglas C. Montgomery,et al.  Applied Statistics and Probability for Engineers, Third edition , 1994 .

[13]  Isaac Skog,et al.  Calibration of a MEMS inertial measurement unit , 2006 .

[14]  A. B. Chatfield.  Fundamentals of high accuracy inertial navigation , 1997 .

[15]  Frank van Graas,et al.  Baltimore , MD DETC 2000 / MECH-6508 CARTESIAN CONTROL FOR THE INERTIAL MEASUREMENT UNIT CALIBRATION PLATFORM , .

[16]  Melvin Alexander.  Applied Statistics and Probability for Engineers , 1995 .

[17]  Naser El-Sheimy,et al.  An Expert Knowledge GPS/INS System for Mobile Mapping and GIS Applications , 2000 .

[18]  Robert M. Rogers,et al.  Applied Mathematics in Integrated Navigation Systems, Third Edition , 2007 .

[19]  Gunar Lorenz,et al.  A Low Cost Angular Rate Sensor for Automotive Applications in Surface Micromachining Technology , 1999 .