Packing and deploying Soft Origami to and from cylindrical volumes with application to automotive airbags

Packing soft-sheet materials of approximately zero bending stiffness using Soft Origami (origami patterns applied to soft-sheet materials) into cylindrical volumes and their deployment via mechanisms or internal pressure (inflation) is of interest in fields including automobile airbags, deployable heart stents, inflatable space habitats, and dirigible and parachute packing. This paper explores twofold patterns, the ‘flasher’ and the ‘inverted-cone fold’, for packing soft-sheet materials into cylindrical volumes. Two initial packing methods and mechanisms are examined for each of the flasher and inverted-cone fold patterns. An application to driver’s side automobile airbags is performed, and deployment tests are completed to compare the influence of packing method and origami pattern on deployment performance. Following deployment tests, two additional packing methods for the inverted-cone fold pattern are explored and applied to automobile airbags. It is shown that modifying the packing method (using different methods to impose the same base pattern on the soft-sheet material) can lead to different deployment performance. In total, two origami patterns and six packing methods are examined, and the benefits of using Soft Origami patterns and packing methods are discussed. Soft Origami is presented as a viable method for efficiently packing soft-sheet materials into cylindrical volumes.

[1]  W. Abraham,et al.  Worldwide surgical experience with the Paracor HeartNet cardiac restraint device. , 2008, The Journal of thoracic and cardiovascular surgery.

[2]  K. Kuribayashi,et al.  Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil , 2006 .

[3]  Larry L. Howell,et al.  A Preliminary Process for Origami-Adapted Design , 2015 .

[4]  Spencer P. Magleby,et al.  Large-Curvature Deployable Developable Structures via Lamina Emergent Arrays , 2015 .

[5]  Spencer P. Magleby,et al.  Accommodating Thickness in Origami-Based Deployable Arrays , 2013 .

[6]  Larry L. Howell,et al.  Single Degree-of-Freedom Rigidly Foldable Cut Origami Flashers , 2015 .

[7]  Charles Michael Wheeler,et al.  Soft Origami: Classification, Constraint, and Actuation of Highly Compliant Origami Structures , 2015 .

[8]  Arnold Tubis,et al.  Betsy Ross Revisited: General Fold and One-Cut Regular and Star Polygons , 2016 .

[9]  Larry L. Howell,et al.  Waterbomb base: a symmetric single-vertex bistable origami mechanism , 2014 .

[10]  Larry L. Howell,et al.  Rigidly foldable origami gadgets and tessellations , 2015, Royal Society Open Science.

[11]  Erik D. Demaine,et al.  Curved Crease Folding – a Review on Art, Design and Mathematics , 2011 .

[12]  Zhou Ya,et al.  Folding Behavior of a Foldable Prismatic Mast With Kresling Origami Pattern , 2016 .

[13]  Tomohiro Tachi,et al.  Rigid-Foldable Thick Origami , 2010 .

[14]  Richard Duks Koschitz.  Computational design with curved creases : David Huffman's approach to paperfolding , 2014 .

[15]  Jian Feng,et al.  Geometry and Motion Analysis of Origami-Based Deployable Shelter Structures , 2015 .

[16]  Jian Feng,et al.  The foldability of cylindrical foldable structures based on rigid origami , 2016 .

[17]  Cai Jianguo,et al.  Bistable Behavior of the Cylindrical Origami Structure With Kresling Pattern , 2015 .

[18]  Robert J. Lang.  Computational origami: from flapping birds to space telescopes , 2009, SCG '09.

[19]  JOSEPH SCHWARTZ.  THE INTERNATIONAL ASSOCIATION FOR SHELL AND SPATIAL STRUCTURES FORMERLY BULLETIN OF THE INTERNATIONAL ASSOCIATION FOR SHELL AND SPATIAL STRUCTURES , 2011 .

[20]  Takeo Igarashi,et al.  Interactive Design of Planar Curved Folding by Reflection , 2011, PG.

[21]  K. Eriksson,et al.  Airbag Folding Based on Origami Mathematics , 2006 .

[22]  Tomohiro Tachi,et al.  Origamizing Polyhedral Surfaces , 2010, IEEE Transactions on Visualization and Computer Graphics.

[23]  Erik D. Demaine,et al.  Reconstructing David Huffman’s Legacy in Curved-Crease Folding , 2016 .

[24]  Jian Feng,et al.  Geometric design and mechanical behavior of a deployable cylinder with Miura origami , 2015 .

[25]  Larry L. Howell,et al.  An Offset Panel Technique for Thick Rigidily Foldable Origami , 2014 .

[26]  Joseph M. Gattas,et al.  Miura-Base Rigid Origami: Parametrizations of Curved-Crease Geometries , 2014 .

[27]  Z. You,et al.  Miura-Base Rigid Origami: Parameterizations of First-Level Derivative and Piecewise Geometries , 2013 .