Bio-ink properties and printability for extrusion printing living cells.

Additive biofabrication (3D bioprinting) makes it possible to create scaffolds with precise geometries, control over pore interconnectivity and architectures that are not possible with conventional techniques. Inclusion of cells within the ink to form a "bio-ink" presents the potential to print 3D structures that can be implanted into damaged/diseased tissue to promote highly controlled cell-based regeneration and repair. The properties of an 'ink' are defined by its formulation and critically influence the delivery and integrity of structure formed. Importantly, the ink properties need to conform to biological requirements necessary for the cell system that they are intended to support and it is often challenging to find conditions for printing that facilitate this critical aspect of tissue bioengineering. In this study, alginate (Alg) was selected as the major component of the 'bio-ink' formulations for extrusion printing of cells. The rheological properties of alginate-gelatin (Alg-Gel) blends were compared with pre-crosslinked alginate and alginate solution to establish their printability whilst maintaining their ability to support optimal cell growth. Pre-crosslinked alginate on its own was liquid-like during printing. However, by controlling the temperature, Alg-Gel formulations had higher viscosity, storage modulus and consistency which facilitated higher print resolution/precision. Compression and indentation testing were used to examine the mechanical properties of alginate compared to Alg-Gel. Both types of gels yielded similar results with modulus increasing with alginate concentration. Decay in mechanical properties over time suggests that Alg-Gel slowly degrades in cell culture media with more than 60% decrease in initial modulus over 7 days. The viability of primary myoblasts delivered as a myoblast/Alg-Gel bio-ink was not affected by the printing process, indicating that the Alg-Gel matrix provides a potential means to print 3D constructs that may find application in myoregenerative applications.

[1]  I. N. Sneddon,et al.  The elastic stresses produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch , 1945, Mathematical Proceedings of the Cambridge Philosophical Society.

[2]  M. Djabourov,et al.  Gelation of aqueous gelatin solutions. I. Structural investigation , 1988 .

[3]  M. Shoichet,et al.  Stability of hydrogels used in cell encapsulation: An in vitro comparison of alginate and agarose , 1996, Biotechnology and bioengineering.

[4]  M. Djabourov,et al.  Physical gelation under shear for gelatin gels , 1997 .

[5]  D J Mooney,et al.  Alginate hydrogels as synthetic extracellular matrix materials. , 1999, Biomaterials.

[6]  Y. M. Lee,et al.  Study on gelatin-containing artificial skin: I. Preparation and characteristics of novel gelatin-alginate sponge. , 1999, Biomaterials.

[7]  Rolf Mülhaupt,et al.  Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer‐assisted design combined with computer‐guided 3D plotting of polymers and reactive oligomers , 2000 .

[8]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[9]  R. Kapsa,et al.  In vivo and in vitro correction of the mdx dystrophin gene nonsense mutation by short-fragment homologous replacement. , 2001, Human gene therapy.

[10]  P. Ma,et al.  Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: part 1. Structure, gelation rate and mechanical properties. , 2001, Biomaterials.

[11]  I. Ca Calcium Signalling and Regulation of Cell Function , 2001 .

[12]  P. Lipp,et al.  Calcium Signalling and Regulation of Cell Function , 2001 .

[13]  D. Mooney,et al.  Hydrogels for tissue engineering. , 2001, Chemical Reviews.

[14]  Rainer Schmelzeisen,et al.  Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques , 2002 .

[15]  R. Landers,et al.  Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. , 2002, Biomaterials.

[16]  L. Shea,et al.  Murine granulosa cell morphology and function are regulated by a synthetic Arg–Gly–Asp matrix , 2003, Molecular and Cellular Endocrinology.

[17]  G. Sheelu,et al.  Gelatin Blends with Alginate: Gels for Lipase Immobilization and Purification , 2003, Biotechnology progress.

[18]  D. Mooney,et al.  Designing alginate hydrogels to maintain viability of immobilized cells. , 2003, Biomaterials.

[19]  E. Sachlos,et al.  Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds. , 2003, European cells & materials.

[20]  I. Fischer,et al.  Peptide-modified Alginate Surfaces as a Growth Permissive Substrate for Neurite Outgrowth , 2004 .

[21]  Alejandro G. Marangoni,et al.  Determination of the maximum gelation temperature in gelatin gels , 2004 .

[22]  Yongnian Yan,et al.  Direct Construction of a Three-dimensional Structure with Cells and Hydrogel , 2005 .

[23]  K. Sandrasegaran,et al.  Distinguishing gelatin bioabsorbable sponge and postoperative abdominal abscess on CT. , 2005, AJR. American journal of roentgenology.

[24]  Ronghua Huang,et al.  Preparation and characterization of alginate/gelatin blend fibers , 2005 .

[25]  A. Jayakrishnan,et al.  Evaluation of an in situ forming hydrogel wound dressing based on oxidized alginate and gelatin. , 2005, Biomaterials.

[26]  M. Hande,et al.  Low temperature tolerance of human embryonic stem cells , 2006, International journal of medical sciences.

[27]  Qun Wang,et al.  Alginate/gelatin blend films and their properties for drug controlled release , 2006 .

[28]  David J Mooney,et al.  Alginate hydrogels as biomaterials. , 2006, Macromolecular bioscience.

[29]  B. Schlosshauer,et al.  The pro-angiogenic characteristics of a cross-linked gelatin matrix. , 2007, Biomaterials.

[30]  W. Hennink,et al.  Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing. , 2007, Tissue engineering.

[31]  Andrés J. García,et al.  Inhibition of in vitro chondrogenesis in RGD-modified three-dimensional alginate gels. , 2007, Biomaterials.

[32]  Peter X Ma,et al.  Maintaining dimensions and mechanical properties of ionically crosslinked alginate hydrogel scaffolds in vitro. , 2008, Journal of biomedical materials research. Part A.

[33]  J. Hubbell,et al.  Three-dimensional extracellular matrix-directed cardioprogenitor differentiation: systematic modulation of a synthetic cell-responsive PEG-hydrogel. , 2008, Biomaterials.

[34]  T. Coviello,et al.  Recent advances and perspectives on coated alginate microspheres for modified drug delivery , 2008, Expert opinion on drug delivery.

[35]  Leo Q Wan,et al.  Calcium Concentration Effects on the Mechanical and Biochemical Properties of Chondrocyte-Alginate Constructs , 2008, Cellular and molecular bioengineering.

[36]  Yongnian Yan,et al.  Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter Tips , 2008 .

[37]  Quanli Li,et al.  Endothelial Cell and Platelet Behavior on Titanium Modified with a Mutilayer of Polyelectrolytes , 2009 .

[38]  Wei Sun,et al.  Bioprinting endothelial cells with alginate for 3D tissue constructs. , 2009, Journal of biomechanical engineering.

[39]  Yongnian Yan,et al.  Gradient Hydrogel Construct Based on an Improved Cell Assembling System , 2009 .

[40]  Yongnian Yan,et al.  Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology: , 2009 .

[41]  Giovanni Vozzi,et al.  Preparation and characterization of alginate/gelatin blend films for cardiac tissue engineering. , 2009, Journal of biomedical materials research. Part A.

[42]  Ravi S Kane,et al.  The influence of hydrogel modulus on the proliferation and differentiation of encapsulated neural stem cells. , 2009, Biomaterials.

[43]  L. Grover,et al.  Encapsulation of fibroblasts causes accelerated alginate hydrogel degradation. , 2010, Acta biomaterialia.

[44]  Matthias P Lutolf,et al.  The effect of matrix characteristics on fibroblast proliferation in 3D gels. , 2010, Biomaterials.

[45]  S. Hofmann,et al.  Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing , 2011, Journal of functional biomaterials.

[46]  W Shain,et al.  Fabrication and optimization of alginate hydrogel constructs for use in 3D neural cell culture , 2011, Biomedical materials.

[47]  Christopher J Murphy,et al.  Indentation versus tensile measurements of Young's modulus for soft biological tissues. , 2011, Tissue engineering. Part B, Reviews.

[48]  Hod Lipson,et al.  Increased mixing improves hydrogel homogeneity and quality of three-dimensional printed constructs. , 2011, Tissue engineering. Part C, Methods.

[49]  Alessandro Giacomello,et al.  Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. , 2012, Biomaterials.

[50]  Peter Dubruel,et al.  A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. , 2012, Biomaterials.

[51]  Xiongbiao Chen,et al.  Influence of Calcium Ions on Cell Survival and Proliferation in the Context of an Alginate Hydrogel , 2012 .

[52]  D. Mooney,et al.  Alginate: properties and biomedical applications. , 2012, Progress in polymer science.

[53]  D. Cho,et al.  Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system , 2012 .