Physics of degradation in GaAs-based heterojunction bipolar transistors

Abstract The GaAs HBT has recently become the technology of choice in particularly demanding wireless communications applications. However, controversy about HBT reliability is still widespread, with conflicting claims for lifetime and activation energy. Here, we detail the fundamental physics of HBT degradation, and describe the stress factors that drive it. Extensive testing shows that degradation is typically due to the formation of midgap traps associated with crystalline defects in the base. In addition, we describe the physical reasons for the superiority of the GaInP emitter in reliable HBT design. Finally, we show preliminary results of a stress test on large area (2 × 45 μm 2 ) GaInP emitter HBTs which have lasted 5000 hours at 75 kA/cm 2 , 215 °C with no discernable degradation in device characteristics yet.

[1]  Osamu Ueda,et al.  Reliability and degradation of III-V optical devices , 1996 .

[2]  T.S. Kim,et al.  Improved reliability self-aligned C/X-band monolithic power HBT amplifiers fabricated with a low-stress process , 1996, GaAs IC Symposium IEEE Gallium Arsenide Integrated Circuit Symposium. 18th Annual Technical Digest 1996.

[3]  Lionel C. Kimerling,et al.  Recombination enhanced defect reactions , 1978 .

[4]  Taisuke Iwai,et al.  High-reliability InGaP/GaAs HBTs fabricated by self-aligned process , 1994, Proceedings of 1994 IEEE International Electron Devices Meeting.

[5]  H. Fushimi,et al.  Degradation mechanism in carbon-doped GaAs minority-carrier injection devices , 1996, Proceedings of International Reliability Physics Symposium.

[6]  O. Ueda,et al.  Degradation of III–V Opto‐Electronic Devices , 1988 .

[7]  E. Zanoni,et al.  A short-term high-current-density reliability investigation of AlGaAs/GaAs heterojunction bipolar transistors , 1998, IEEE Electron Device Letters.

[8]  N. Pan,et al.  Migration from an AlGaAs to an InGaP emitter HBT IC process for improved reliability , 1998, GaAs IC Symposium. IEEE Gallium Arsenide Integrated Circuit Symposium. 20th Annual. Technical Digest 1998 (Cat. No.98CH36260).

[9]  A. Christou,et al.  Reliability of gallium arsenide MMICs , 1992 .

[10]  S. Bahl,et al.  Reliability investigation of InGaP/GaAs heterojunction bipolar transistors , 1995, Proceedings of International Electron Devices Meeting.

[11]  Hirohiko Sugahara,et al.  Improved reliability of AlGaAs/GaAs heterojunction bipolar transistors with a strain-relaxed base , 1993, 15th Annual GaAs IC Symposium.

[12]  T. Henderson,et al.  Model for degradation of GaAs/AlGaAs HBTs under temperature and current stress , 1995, Proceedings of International Electron Devices Meeting.

[13]  F. Ren,et al.  Effect of base dopant species on heterojunction bipolar transistor reliability , 1994 .

[14]  Mitsuo Fukuda,et al.  Reliability and degradation of semiconductor lasers and LEDs , 1991 .

[15]  T. Moise,et al.  Hydrogen-related burn-in in GaAs/AlGaAs HBTs and implications for reliability , 1996, International Electron Devices Meeting. Technical Digest.

[16]  William Liu Handbook of III-V Heterojunction Bipolar Transistors , 1998 .