From concept to reality – A review to the primary test stand and its preliminary application in high energy density physics

Abstract Pulsed power technology, whereas the electrical energy stored in a relative long period is released in much shorter timescale, is an efficient method to create high energy density physics (HEDP) conditions in laboratory. Around the beginning of this century, China Academy of Engineering Physics (CAEP) began to build some experimental facilities for HEDP investigations, among which the Primary Test Stand (PTS), a multi-module pulsed power facility with a nominal current of 10 MA and a current rising time ∼90 ns, is an important achievement on the roadmap of the electro-magnetically driven inertial confinement fusion (ICF) researches. PTS is the first pulsed power facility beyond 10 TW in China. Therefore, all the technologies have to be demonstrated, and all the engineering issues have to be overcome. In this article, the research outline, key technologies and the preliminary HEDP experiments are reviewed. Prospects on HEDP research on PTS and pulsed power development for the next step are also discussed.

[1]  Rick B. Spielman,et al.  Z pinches-A historical view , 2001 .

[2]  Shuping Feng,et al.  Development of a high-reliability low-jitter 6 MV/300 kJ Marx generator , 2008 .

[3]  R. G. Adams,et al.  Pulsed-power-driven high energy density physics and inertial confinement fusion research , 2004 .

[4]  K.W. Struve,et al.  PBFA II-Z: A 20-MA driver for Z-pinch experiments , 1995, Digest of Technical Papers. Tenth IEEE International Pulsed Power Conference.

[5]  Feng Shuping,et al.  Development of a 4 MV Laser-Triggered Multi-Stage Switch , 2008 .

[6]  R. Bowers,et al.  Z-Pinch-Generated X Rays Demonstrate Potential for Indirect-Drive ICF Experiments , 1999 .

[7]  Clint Allen Hall,et al.  Isentropic compression experiments on the Sandia Z accelerator , 2000 .

[8]  G. Chandler,et al.  Tungsten wire-array Z-pinch experiments at 200 TW and 2 MJ , 1998 .

[9]  Dillon Heirman McDaniel,et al.  SATURN: A LARGE AREA X-RAY SIMULATION ACCELERATOR , 1987 .

[10]  D. Ryutov,et al.  The physics of fast Z pinches , 1998 .

[11]  D.H. McDaniel,et al.  The Z refurbishment project (ZR) at Sandia National Laboratories , 2003, Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472).

[12]  B. Hammel,et al.  The NIF Ignition Program: progress and planning , 2006 .

[13]  D. Bliss,et al.  Magnetically driven isentropic compression to multimegabar pressures using shaped current pulses on the Z accelerator , 2004 .

[14]  He An,et al.  Initial Performance of the Primary Test Stand , 2013, IEEE Transactions on Plasma Science.

[15]  Li Jianying,et al.  Improvement of Surface Flashover Performance of Al2O3 Ceramics in Vacuum by Adopting A-B-A Insulation System , 2011 .

[16]  Samuel A. Letzring,et al.  Initial performance results of the OMEGA laser system , 1997 .

[17]  R. P. Drake,et al.  High-Energy-Density Physics: Fundamentals, Inertial Fusion, and Experimental Astrophysics , 2006 .

[18]  Yang Li.  High energy density physics facility FP-1 and its applications , 2002 .

[19]  M. Matzen.  Z pinches as intense x-ray sources for high-energy density physics applications , 1997 .