Effect of cavity location on combustion flow field of integrated hypersonic vehicle in near space

The cavity has been widely employed as the flame holder to prolong the residence time of fuel in supersonic flows since it improves the combustion efficiency in the scramjet combustor, and also imposes additional drag on the engine. In this paper, the two-dimensional coupled implicit Reynolds Average Navier–Stokes equations, the RNG k–ε turbulence model and the finite-rate/eddy-dissipation reaction model have been employed to numerically simulate the combustion flow field of an integrated hypersonic vehicle. The effect of cavity location on the combustion flow field of the vehicle has been investigated, and the fuel, namely hydrogen, was injected upstream of the cavity on the walls of the first stage combustor. The obtained results show that the viscous lift force, drag force and pitching moment of the vehicle are nearly unchanged by varying the cavity location over the location range and designs considered in this article, namely the configurations with single cavity, double cavities in tandem and double cavities in parallel. The variation of the fuel injection strategy affects the separation of the boundary layer, and the viscous effect on the drag force of the vehicle is remarkable, but the viscous effects on the lift force and the pitching moment are both small and they can be neglected in the design process of hypersonic vehicles. In addition to varying the location of the cavities, three fuel injection configurations were considered. It was found that one particular case can restrict the inlet unstart for the scramjet engine.Graphical Abstract

[1]  S. Baek,et al.  Numerical study on supersonic combustion with cavity-based fuel injection , 2004 .

[2]  Sadatake Tomioka,et al.  Performance of a Dual-Mode Combustor with Multistaged Fuel Injection , 2006 .

[3]  Jing Lei,et al.  Numerical investigation on the shock wave transition in a three-dimensional scramjet isolator , 2011 .

[4]  Campbell D. Carter,et al.  Stability limits of cavity-stabilized flames in supersonic flow , 2005 .

[5]  Lin Ma,et al.  Investigation on the flameholding mechanisms in supersonic flows: backward-facing step and cavity flameholder , 2010, J. Vis..

[6]  Chang-Kee Kim,et al.  Cavity Flows in a Scramjet Engine by the Space-Time Conservation and Solution Element Method , 2004 .

[7]  Lin Ma,et al.  Investigation of Turbulent Models for the Flow Field From a Typical Strut-Based Scramjet Combustor , 2011 .

[8]  Wang Zhenguo.  Influence of head configuration on aerodynamic-propulsive performance of hypersonic vehicles , 2009 .

[9]  Zhenguo Wang,et al.  Mixing Characteristics in a Supersonic Combustor with Gaseous Fuel Injection Upstream of a Cavity Flameholder , 2009 .

[10]  David W. Zingg,et al.  A perspective on turbulence models for aerodynamic flows , 2009 .

[11]  L. H. Chen,et al.  Experimental Investigation on Flameholding Mechanism and Combustion Performance in Hydrogen-Fueled Supersonic Combustors , 2002 .

[12]  Vigor Yang,et al.  Combustion oscillations in a scramjet engine combustor with transverse fuel injection , 2005 .

[13]  Lin Ma,et al.  Hydrogen Fueled Scramjet Combustor - the Impact of Fuel Injection , 2010 .

[14]  Edward B. Tomme,et al.  The Paradigm Shift to Effects-Based Space Near-Space as a Combat Space Effects Enabler , 2012 .

[15]  Huang Wei,et al.  Effect of cavity flame holder's location on the aero-propulsive performance of hypersonic vehicles , 2010 .

[16]  Lihong Chen,et al.  Thrust and drag of a scramjet model with different combustor geometries , 2005 .

[17]  V. Katta,et al.  Flame Stabilization in Small Cavities , 2010 .

[18]  Wei Huang,et al.  Numerical study of attack angle characteristics for integrated hypersonic vehicle , 2009 .

[19]  Campbell D. Carter,et al.  Mixing and combustion studies using cavity-based flameholders in a supersonic flow , 2004 .

[20]  Wang Zhenguo,et al.  Effects of the Configuration and Fuel Injection on Scramjet Combustor Performance , 2007 .

[21]  Wang Zhenguo,et al.  Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance , 2007 .

[22]  Wei Huang,et al.  Effect of cavity flame holder configuration on combustion flow field performance of integrated hypersonic vehicle , 2010 .