NDE using sensor based approach to propulsion health monitoring of a turbine engine disk
暂无分享,去创建一个
Mark R. Woike | George Y. Baaklini | Ali Abdul-Aziz | John D. Lekki | G. Abumeri | G. Baaklini | J. Lekki | G. Abumeri | A. Abdul-Aziz
[1] Richard E. Martin,et al. Vibration Based Crack Detection in a Rotating Disk , 2003 .
[2] A. S. Sekhar,et al. Condition monitoring of cracked rotors through transient response , 1998 .
[3] Donald L. Simon. An Overview of the NASA Aviation Safety Program Propulsion Health Monitoring Element , 2000 .
[4] H. Eric. Real-time detection of developing cracks in jet engine rotors , 2000, 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484).
[5] M. Kanninen,et al. A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .
[6] Ali Abdul-Aziz,et al. Finite element design study of a bladed flat rotating disk to simulate cracking in a typical turbine disk: Part II , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[7] De Xie,et al. Strain energy release rate calculation for a moving delamination front of arbitrary shape based on the virtual crack closure technique. Part I: Formulation and validation , 2006 .
[8] Bahram Farahmand,et al. Fracture Mechanics of Metals, Composites, Welds, and Bolted Joints , 2001 .
[9] Jörg Wauer,et al. On the Dynamics of Cracked Rotors: A Literature Survey , 1990 .
[10] Bahram Farahmand,et al. Fatigue and fracture mechanics of high risk parts , 1997 .
[11] De Xie,et al. Progressive crack growth analysis using interface element based on the virtual crack closure technique , 2006 .
[12] Richard W. Rauser,et al. A combined NDE/FEA approach to evaluate the structural response of a metal foam , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[13] De Xie,et al. Strain energy release rate calculation for a moving delamination front of arbitrary shape based on the virtual crack closure technique. Part II: Sensitivity study on modeling details , 2006 .
[14] I. Raju. Calculation of strain-energy release rates with higher order and singular finite elements , 1987 .
[15] J. Mathias,et al. Program , 1970 .
[16] P. Young,et al. On the material characterization of a composite using micro CT image based finite element modeling , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[17] George Y. Baaklini,et al. Finite element design study of a bladed, flat rotating disk to simulate cracking in a typical turbine disk , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.