Foaming Behaviors and Mechanical Properties of Injection-Molded Polylactide/Cotton-Fiber Composites

In this study, we investigated the effects of short shot size, lubricant, and cotton fibers on the foaming and mechanical properties of poly(lactic acid) (PLA). The short shot filling capacity infl...

[1]  Guoqun Zhao,et al.  Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability , 2019, Polymer.

[2]  I. Zizović,et al.  Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release. , 2019, Materials science & engineering. C, Materials for biological applications.

[3]  Chul B. Park,et al.  Development of PLA/cellulosic fiber composite foams using injection molding: Crystallization and foaming behaviors , 2016 .

[4]  Chul B. Park,et al.  Study of the bubble nucleation and growth mechanisms in high-pressure foam injection molding through in-situ visualization , 2016 .

[5]  Chul B. Park,et al.  Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams , 2015 .

[6]  Chul B. Park,et al.  Rheology, thermal properties, and foaming behavior of high D-content polylactic acid/cellulose nanofiber composites , 2015 .

[7]  Chul B. Park,et al.  Non-isothermal crystallization behaviors of poly(lactic acid)/cellulose nanofiber composites in the presence of CO2 , 2015 .

[8]  Guoqun Zhao,et al.  Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding , 2015 .

[9]  Chul B. Park,et al.  Poly (lactic acid) foaming , 2014 .

[10]  M. Ohshima,et al.  Preparation of micro/nanocellular polypropylene foam with crystal nucleating agents , 2014 .

[11]  Chul B. Park,et al.  Extruded PLA/clay nanocomposite foams blown with supercritical CO2 , 2014 .

[12]  Chul B. Park,et al.  Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties , 2014 .

[13]  Y. Bin,et al.  Crystallization behavior of poly(lactic acid)/microfibrillated cellulose composite , 2013 .

[14]  W. Yuan,et al.  Investigation of crystallization behavior of solid and microcellular injection molded polypropylene/nano-calcium carbonate composites using carbon dioxide as a blowing agent , 2013 .

[15]  Xiangfang Peng,et al.  Influence and prediction of processing parameters on the properties of microcellular injection molded thermoplastic polyurethane based on an orthogonal array test , 2013 .

[16]  Chul B. Park,et al.  Processing and characterization of solid and foamed injection-molded polylactide with talc , 2013 .

[17]  Chul B. Park,et al.  Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures , 2013 .

[18]  Xiangfang Peng,et al.  Morphology and Properties of Injection Molded Solid and Microcellular Polylactic Acid/Polyhydroxybutyrate-Valerate (PLA/PHBV) Blends , 2013 .

[19]  Chul B. Park,et al.  Poly(lactic acid) crystallization , 2012 .

[20]  Chul B. Park,et al.  Effect of dissolved CO2 on the crystallization behavior of linear and branched PLA , 2012 .

[21]  T. Ishikawa,et al.  Visual observation and numerical studies of N2 vs. CO2 foaming behavior in core‐back foam injection molding , 2012 .

[22]  J. Månson,et al.  The potential of wood fibers as reinforcement in cellular biopolymers , 2012 .

[23]  H. Schmidt,et al.  Influence of supramolecular additives on foam morphology of injection-molded i-PP , 2011 .

[24]  T. Ishikawa,et al.  Visual observation and numerical studies of polymer foaming behavior of polypropylene/carbon dioxide system in a core-back injection molding process , 2011 .

[25]  A. Maazouz,et al.  Batch foaming of chain extended PLA with supercritical CO2: Influence of the rheological properties and the process parameters on the cellular structure , 2011 .

[26]  A. Addad,et al.  Crystallization Behavior of Carbon Nanotube−Polylactide Nanocomposites , 2011 .

[27]  W. Yuan,et al.  Foaming of Poly(lactic acid) Based on Its Nonisothermal Crystallization Behavior under Compressed Carbon Dioxide , 2011 .

[28]  H. Naguib,et al.  Development and characterization of solid and porous polylactide‐multiwall carbon nanotube composites , 2011 .

[29]  K. Lau,et al.  Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. , 2010 .

[30]  Hsiu-Yu Cheng,et al.  Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films , 2010 .

[31]  Yan Li,et al.  Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites , 2010 .

[32]  A. Janorkar,et al.  Poly(lactic acid) modifications , 2010 .

[33]  L. Turng,et al.  Microcellular processing of polylactide–hyperbranched polyester–nanoclay composites , 2010 .

[34]  J. Yeh,et al.  The mechanical/thermal properties of microcellular injection-molded poly-lactic-acid nanocomposites , 2009 .

[35]  D. Rodrigue,et al.  The effect of injection molding conditions on the morphology of polymer structural foams , 2009 .

[36]  H. Oyama.  Super-tough poly(lactic acid) materials : Reactive blending with ethylene copolymer , 2009 .

[37]  L. Turng,et al.  Microcellular and Solid Polylactide–Flax Fiber Composites , 2009 .

[38]  Chul B. Park,et al.  Reducing Material Costs with Microcellular/Fine-celled Foaming , 2007 .

[39]  Jöns Hilborn,et al.  Poly(lactic acid) fiber : An overview , 2007 .

[40]  Chul B. Park,et al.  Use of Nitrogen as a Blowing Agent for the Production of Fine-Celled High-Density Polyethylene Foams† , 2006 .

[41]  A. Błędzki,et al.  Microcellular Injection Molded Wood Fiber-PP Composites: Part II - Effect of Wood Fiber Length and Content on Cell Morphology and Physico-mechanical Properties , 2006 .

[42]  E. Giannelis,et al.  Poly(lactic acid) nanocomposites: comparison of their properties with montmorillonite and synthetic mica (II) , 2003 .