Optimization of extrusion production lines for EPDM rubber vulcanized with sulphur: A two-phase model based on Finite Elements and kinetic second order differential equation

Abstract A numerical two-phase approach, based on experimental curometer charts and aimed at predicting the optimal production line parameters (exposition time and cure temperature) for extruded thick rubber items cured with accelerated sulphur is presented. In the first phase, a simple kinetic model based on the actual reticulation reactions occurring during sulphur curing is utilized to fit experimental curometer data. The model is able to predict the degree of crosslinking at successive curing times and at different controlled temperatures and it requires the calibration of only three kinetic constants. The variation of such parameters with temperature is then evaluated by means of three experimental cure curves performed at three different temperatures. Both the case of indefinite increase of the torque and reversion can be handled. In the second phase, considering the same rubber compound of step one, kinetic reaction parameters are implemented in a Finite Element (FE) software, specifically developed to perform thermal analyses on complex 2D geometries. As an example, an extruded cylindrical thick EPDM item is considered and meshed through four-noded isoparametric plane elements. Several FE simulations are repeated by changing exposition time tc and external cure temperature Tn, to evaluate for each (tc,Tn) couple the corresponding mechanical properties of the item at the end of the thermal treatment. An alternating tangent approach (AT) is used to drastically reduce the computational efforts required to converge to the optimal solution associated with the maximization of the average tensile strength.

[1]  K. S. Tan,et al.  Effect of filler loading on tensile and tear properties of SMR L/ENR 25 and SMR L/SBR blends cured via a semi-efficient vulcanization system , 2002 .

[2]  N. J. Morrison,et al.  Crosslinking of Rubbers , 1996 .

[3]  John S. Dick,et al.  Alternate instrumental methods of measuring scorch and cure characteristics , 1995 .

[4]  A. Zaldua,et al.  Techniques used for determining cure kinetics of rubber compounds , 2007 .

[5]  J. L. Koenig,et al.  Solid State Carbon-13 NMR Studies of Elastomers. XL N-t-Butyl Benzothiazole Sulfenimide Accelerated Sulfur Vulcanization of cis-Polyisoprene at 75 MHz , 1993 .

[6]  Fred W. Billmeyer,et al.  Textbook Of Polymer Science , 1971 .

[7]  Guoqun Zhao,et al.  Investigation of computer-aided engineering of silicone rubber vulcanizing (I)—vulcanization degree calculation based on temperature field analysis , 2003 .

[8]  M. F. Chen,et al.  Cure characteristics of unaccelerated sulfur vulcanization of epoxidized natural rubber , 1996 .

[9]  G. Padmavathi,et al.  Neural modelling of Mooney viscosity of polybutadiene rubber , 2005, Comput. Chem. Eng..

[10]  Federico Milani,et al.  Genetic algorithm for the optimization of rubber insulated high voltage power cables production lines , 2008, Comput. Chem. Eng..

[11]  Musa R. Kamal,et al.  Kinetics and thermal characterization of thermoset cure , 1973 .

[12]  Guoqun Zhao,et al.  Investigation of computer-aided engineering of silicone rubber vulcanizing (II)—finite element simulation of unsteady vulcanization field , 2002 .

[13]  Lijia An,et al.  Combined Effects of Hot Curing Conditions and Reaction Heat on Rubber Vulcanization Efficiency and Vulcanizate Uniformity , 2009 .

[14]  Gabriele Milani,et al.  Simple kinetic numerical model based on rheometer data for ethylene–propylene–diene monomer accelerated sulfur crosslinking , 2012 .

[15]  K. W. Wong,et al.  Effect of blend ratio on Mooney scorch time of rubber blends , 1998 .

[16]  B. T. Poh,et al.  Dependence of Mooney scorch time of SMR L, ENR 25, and ENR 50 on concentration and types of antioxidants , 1999 .

[17]  B. T. Poh,et al.  Effect of silane coupling agents on the mooney scorch time of silica-filled natural rubber compound , 1998 .

[18]  Thomas F. Coleman,et al.  On the convergence of interior-reflective Newton methods for nonlinear minimization subject to bounds , 1994, Math. Program..

[19]  J. L. Koenig,et al.  Compounding Variables Influencing the Reversion Process in Accelerated Curing of Natural Rubber , 1982 .

[20]  Vanja Kosar,et al.  Crosslinking of an unsaturated polyester resin in the mould: Modelling and heat transfer studies , 2010 .

[21]  C. T. Loo.  High temperature vulcanization of elastomers: 2. Network structures in conventional sulphenamide-sulphur natural rubber vulcanizates , 1974 .

[22]  Gabriele Milani,et al.  A Numerical Model for the Optimal Vulcanization of 2D Polar Rubber Compounds Using Microwaves , 2009 .

[23]  A. I. Leonov,et al.  A Study of the Vulcanization Kinetics of an Accelerated-Sulfur SBR Compound , 1996 .

[24]  B. T. Poh,et al.  Mooney scorch time and cure index of epoxidized natural rubber in presence of sodium carbonate , 2001 .

[25]  J. L. Koenig,et al.  A review of sulfur crosslinking fundamentals for accelerated and unaccelerated vulcanization , 1993 .

[26]  C. Bawn,et al.  The chemistry and physics of rubber-like substances: Edited by L. Bateman MacLaren: London; Wiley: New York, 1963. xiv+784 pp. 168s , 1964 .

[27]  Miroslava Duskova,et al.  Cure Curve with Two Plateaus - The Result of Individual Vulcanization Reactions , 2001 .

[28]  Lois C. K. Carwile,et al.  Thermal Conductivity of Soft Vulcanized Natural Rubber, Selected Values , 1966 .

[29]  O. C. Zienkiewicz,et al.  The Finite Element Method: Basic Formulation and Linear Problems , 1987 .

[30]  Gabriele Milani,et al.  Optimal vulcanization of 2D–3D EPM/EPDM thick elements through peroxidic mixtures , 2009 .

[31]  Gabriele Milani,et al.  A Three-Function Numerical Model for the Prediction of Vulcanization-Reversion of Rubber During Sulfur Curing , 2011 .

[32]  Arantxa Eceiza,et al.  Accelerator adsorption onto carbon nanotubes surface affects the vulcanization process of styrene–butadiene rubber composites , 2009 .

[33]  A. I. Leonov,et al.  A Kinetic-Model for Sulfur Accelerated Vulcanization of a Natural-Rubber Compound , 1996 .

[34]  Vanja Kosar,et al.  Modelling and simulation of the continuous power cable processing , 2007 .