Heat pipe based municipal waste treatment unit for home energy recovery

[1]  J. Danielewicz,et al.  The performance of a heat pipe based solar PV/T roof collector and its potential contribution in district heating applications , 2017 .

[2]  H. Jouhara,et al.  An investigation into the use of the heat pipe technology in thermal energy storage heat exchangers , 2017 .

[3]  A. Z. S. Chong,et al.  Experimental and numerical investigation of a cross flow air-to-water heat pipe-based heat exchanger used in waste heat recovery , 2016 .

[4]  A. Olabi.  Hydrogen and Fuel Cell developments: An introduction to the special issue on “The 8th International Conference on Sustainable Energy and Environmental Protection (SEEP 2015), 11–14 August 2015, Paisley, Scotland, UK” , 2016 .

[5]  J. Danielewicz,et al.  The performance of a novel flat heat pipe based thermal and PV/T (photovoltaic and thermal systems) solar collector that can be used as an energy-active building envelope material , 2016 .

[6]  Hussam Jouhara,et al.  Experimental and numerical investigation of an air-to-water heat pipe-based heat exchanger , 2015 .

[7]  Hussam Jouhara,et al.  CFD modelling of a two-phase closed thermosyphon charged with R134a and R404a , 2015 .

[8]  P. He,et al.  Reprint of: Pyrolysis technologies for municipal solid waste: a review. , 2015, Waste management.

[9]  J. Danielewicz,et al.  Experimental and analytical performance investigation of air to air two phase closed thermosyphon based heat exchangers , 2014 .

[10]  Hussam Jouhara,et al.  Heat pipe based thermal management systems for energy-efficient data centres , 2014 .

[11]  P. He,et al.  Pyrolysis technologies for municipal solid waste: a review. , 2014, Waste management.

[12]  F. Abnisa,et al.  A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil , 2014 .

[13]  David Reay,et al.  Heat pipes : theory, design and applications , 2014 .

[14]  Rural Affairs.  Department for Environment, Food and Rural Affairs (Defra) Security - Passholders records , 2013 .

[15]  Hussam Jouhara,et al.  Numerical modelling of the temperature distribution in a two-phase closed thermosyphon , 2013 .

[16]  Huicong Liu,et al.  Zn5(OH)8Cl2·H2O-based quantum dots-sensitized solar cells: A common corrosion product enhances the performance of photoelectrochemical cells , 2013 .

[17]  Ramón Murillo,et al.  Waste tyre pyrolysis – A review , 2013 .

[18]  N. Miskolczi,et al.  Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: product yields, gas and pyrolysis oil properties. , 2013, Bioresource technology.

[19]  Mohammad. Rasul,et al.  Biofuels Production through Biomass Pyrolysis —A Technological Review , 2012 .

[20]  Kevin Kerrigan,et al.  Heat pipe-based radiator for low grade geothermal energy conversion in domestic space heating , 2011, Simul. Model. Pract. Theory.

[21]  Abdul-Ghani Olabi,et al.  The 3rd international conference on sustainable energy and environmental protection SEEP 2009-Guest Editor's Introduction , 2010 .

[22]  Anthony J. Robinson,et al.  Experimental investigation of small diameter two-phase closed thermosyphons charged with water, FC-84, FC-77 and FC-3283 , 2010 .

[23]  Zhiquan Hu,et al.  Effect of particle size on pyrolysis of single-component municipal solid waste in fixed bed reactor , 2010 .

[24]  Hsien Hui Khoo,et al.  Life cycle impact assessment of various waste conversion technologies. , 2009, Waste management.

[25]  Paul Upham,et al.  Integrated assessment of bioelectricity technology options , 2009 .

[26]  M. Ni,et al.  Pyrolysis characteristics of organic components of municipal solid waste at high heating rates. , 2009, Waste management.

[27]  Wang Gang,et al.  Contribution to emission reduction of CO2 and SO2 by household biogas construction in rural China , 2007 .

[28]  Weiming Yi,et al.  Investigation on caloric requirement of biomass pyrolysis using TG–DSC analyzer , 2006 .

[29]  E. Ranzi,et al.  Detailed Kinetic Modeling of Thermal Degradation of Biomasses , 2006 .

[30]  Koichiro Watanabe,et al.  Chemical and mineralogical evaluation of slag products derived from the pyrolysis/melting treatment of MSW. , 2006, Waste management.

[31]  Mohamed Maalej,et al.  Shear strengthening of RC deep beams using externally bonded FRP systems , 2005 .

[32]  Cen Ke-fa.  Experimental Study on Mixed Pyrolysis Characteristics of Typical MSW Components , 2005 .

[33]  M. Islam,et al.  The fuel properties of pyrolysis liquid derived from urban solid wastes in Bangladesh. , 2004, Bioresource technology.

[34]  Thomas Malkow,et al.  Novel and innovative pyrolysis and gasification technologies for energy efficient and environmentally sound MSW disposal. , 2004, Waste management.

[35]  C. Tseng,et al.  Pyrolysis product distribution of waste newspaper in MSW , 2003 .

[36]  C. Tseng,et al.  Pyrolysis products of uncoated printing and writing paper of MSW , 2002 .

[37]  Bruce E. Waymack,et al.  Pyrolysis behavior and kinetics of biomass derived materials , 2002 .

[38]  J. Hustad,et al.  Pyrolysis characteristics and kinetics of municipal solid wastes , 2001 .

[39]  Paul T. Williams,et al.  Interaction of Plastics in Mixed-Plastics Pyrolysis , 1999 .

[40]  Paul T. Williams,et al.  The pyrolysis of individual plastics and a plastic mixture in a fixed bed reactor , 1997 .

[41]  C. Di Blasi,et al.  Kinetic and Heat Transfer Control in the Slow and Flash Pyrolysis of Solids , 1996 .