The Impact of Parasitic Inductance on the Performance of Silicon–Carbide Schottky Barrier Diodes

1200V/300A silicon carbide Schottky barrier diode (SiC SBD) and Si pin diode modules have been tested as free-wheeling diodes under conditions of clamped inductive switching over a temperature range between -40 °C and 125 °C. Over the temperature range, the turn-OFF switching energy increases by 100% for the Si pin diode, whereas that of the SiC diode is temperature invariant and is 50% less than that of the Si pin diode at 125°C. However, the SiC SBD suffers from ringing/oscillations due to an underdamped response to an RLC circuit formed among the diode depletion capacitance, parasitic inductance, and diode resistance. These oscillations contribute to additional power losses that cause the SiC SBDs to be outperformed by the Si pin diodes at -40 °C and 0 °C. The higher depletion capacitance and lower series resistance of the SiC SBD contribute to a lower damping factor compared to the Si device. Furthermore, the positive temperature coefficient of the ON-state resistance in silicon contributes to better damping at high power levels, whereas the temperature invariance of the ON-state resistance in SiC means the oscillations persist at high temperatures. SPICE simulations and experimental measurements have been used to validate analytical expressions that have been developed for the circuit damping and oscillation frequency.

[1]  A. Agarwal,et al.  10 kV/120 A SiC DMOSFET half H-bridge power modules for 1 MVA solid state power substation , 2011, 2011 IEEE Electric Ship Technologies Symposium.

[2]  Munaf Rahimo,et al.  Characterisation of 4H-SiC Schottky diodes for IGBT applications , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[3]  B. Ozpineci,et al.  A 55 kW three-phase inverter with Si IGBTs and SiC Schottky diodes , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[4]  Jun Wang,et al.  10 kV SiC MOSFET Based Boost Converter , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[5]  R. A. Wood,et al.  Evaluation of a 1200-V, 800-A All-SiC Dual Module , 2011, IEEE Transactions on Power Electronics.

[6]  Z. Krzeminski,et al.  Performance comparison of SiC Schottky diodes and silicon ultra fast recovery diodes , 2011, 2011 7th International Conference-Workshop Compatibility and Power Electronics (CPE).

[7]  David Grider,et al.  Comparison of 4.5 kV SiC JBS and Si PiN diodes for 4.5 kV Si IGBT anti-parallel diode applications , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[8]  Hard-Switched Silicon IGBTs ? Cut Switching Losses in Half with Silicon Carbide Schottky Diodes by Jim Richmond , 2006 .

[9]  M. Melloch,et al.  SiC power Schottky and PiN diodes , 2002 .

[10]  Richard A. Lukaszewski,et al.  Developments in Hybrid Si – SiC Power Modules , 2006 .

[11]  H.-R. Chang,et al.  Development and demonstration of silicon carbide (SiC) inverter module in motor drive , 2003, ISPSD '03. 2003 IEEE 15th International Symposium on Power Semiconductor Devices and ICs, 2003. Proceedings..

[12]  Marek Adamowicz,et al.  Evaluation of SiC JFETs and SiC Schottky diodes for wind generation systems , 2011, 2011 IEEE International Symposium on Industrial Electronics.