Modeling mean flow and turbulence characteristics in gas-agitated bath with top layer

A numerical study is presented of the flow characteristics in a gas-agitated water bath in the presence of a top layer of dissimilar fluid. Two systems are considered, comprised separately of silicon and normal pentane as the top layer, to simulate slag cover in a real steelmaking process. The mathematical model involves solution of transport equations for the variables of each phase, with allowance for interphase transfer of momentum. Turbulence is assumed to be a property of the carrier (liquid) phase and represented through solution of additional transport equations for the turbulence kinetic energy, k, and its rate of dissipation, ɛ. The model also accounts for turbulence modulation by the bubbles through enhancement of the source terms in the equations for k and ɛ. The predicted mean and fluctuating velocities, stresses, and turbulence production are generally in the consensus of the experimental data. Both mean flow and turbulence characteristics are found to be suppressed in the water/silicon system of smaller density ratio, indicating enhanced re-entrainment of the top layer, than the water/normal pentane system.

[1]  M. G. Frohberg,et al.  Mass transfer in a bottom blowing cold model converter , 1993 .

[2]  R. Guthrie,et al.  Modeling of metallurgical emulsions , 1994 .

[3]  Julian Szekely,et al.  An experimental and theoretical study of gas bubble driven circulation systems , 1982 .

[4]  R. Lahey,et al.  Phase distribution in bubbly two-phase flow in vertical ducts , 1994 .

[5]  Y. Sahai,et al.  Advances in Transport Processes in Metallurgical Systems , 1992 .

[6]  S. J. Lee,et al.  The Prediction of Two-Phase Turbulence and Phase Distribution Phenomena Using a Reynolds Stress Model , 1990 .

[7]  Manabu Iguchi,et al.  EVALUATION OF CRITICAL GAS FLOW RATE FOR THE ENTRAPMENT OF SLAG USING A WATER MODEL , 1994 .

[8]  J. T. Kuo,et al.  Flow of bubbles through nozzles , 1988 .

[9]  Stein Tore Johansen,et al.  Fluid dynamics in bubble stirred ladles: Part II. Mathematical modeling , 1988 .

[10]  R. Lahey,et al.  Phase distribution in complex geometry conduits , 1993 .

[11]  R. Guthrie,et al.  Multidimensional heat, mass and flow phenomena in gas stirred reactors , 1985 .

[12]  J. Marié,et al.  Modelling of the skin friction and heat transfer in turbulent two-component bubbly flows in pipes , 1987 .

[13]  P. Bradshaw,et al.  Turbulence Models and Their Application in Hydraulics. By W. RODI. International Association for Hydraulic Research, Delft, 1980. Paperback US $15. , 1983, Journal of Fluid Mechanics.

[14]  B. Launder,et al.  Lectures in mathematical models of turbulence , 1972 .

[15]  A.M.O. Smith,et al.  Turbulence models and their application in hydraulics: W. Rodi, University of Karlsruhe, International Association for Hydraulic Research, Rotterdamseweg 185, 2600 MH Delft, The Netherlands , 1981 .

[16]  H. F. Svendsen,et al.  Local flow structures in internal loop and bubble column reactors , 1992 .

[17]  J. Szekely,et al.  A Comparison of Experimentally Measured and Theoretically Calculated Velocity Fields in a Water Model of an Argon Stirred Ladle. , 1993 .

[18]  Manabu Iguchi,et al.  Water model experiment on the liquid flow behavior in a bottom blown bath with top layer , 1996 .

[19]  Julian Szekely,et al.  The modeling of gas-bubble driven circulations systems. , 1990 .

[20]  Seon-hyo Kim,et al.  Physical modeling of liquid/liquid mass transfer in gas stirred ladles , 1987 .

[21]  M. Iguchi,et al.  The Characteristics of Water and Bubbling Jets in a Cylindrical Vessel with Bottom Blowing , 1988 .

[22]  Kazumi Mori,et al.  Recent Studies in Process Science of Injection Metallurgy , 1983 .

[23]  Brian Launder,et al.  A Reynolds stress model of turbulence and its application to thin shear flows , 1972, Journal of Fluid Mechanics.

[24]  Franz Oeters,et al.  Emulsification and mass transfer in ladle metallurgy , 1991 .