Using Computational Fluid Dynamics To Study the Dynamic Behavior of the Continuous Mixing of Herschel-Bulkley Fluids

A continuous-flow mixer was designed and built to study the mixing of xanthan gum solution, a pseudoplastic fluid possessing yield stress. The extent of flow nonideality was quantified using a dynamic model that incorporated two parameters: channeling and fully mixed volume in the vessel. Dynamic experiments were made using the frequency-modulated random binary input of a brine solution to determine the magnitude of nonideal flow parameters. The same experiments were simulated using a computational fluid dynamics (CFD) package (Fluent 6.2). CFD flow fields were used to obtain the system dynamic response to a tracer injection applied at conditions identical to the experimental ones. The extents of channeling and effective mixed volume were determined using the CFD model and then compared with the parameters obtained experimentally. Validated CFD flow fields enabled us to effectively monitor the effect of various operating conditions on flow nonideality, to relate flow pattern and cavern dimension to flow n...

[1]  Mostafa Barigou,et al.  CFD analysis of caverns and pseudo-caverns developed during mixing of non-newtonian fluids , 2007 .

[2]  Jie Wu,et al.  Performance analysis of axial‐flow mixing impellers , 2000 .

[3]  Vivek V. Ranade,et al.  Comparison of axial flow impellers using a laser doppler anemometer , 1992 .

[4]  Farhad Ein-Mozaffari,et al.  Simulation of mixing dynamics in agitated pulp stock chests using CFD , 2006 .

[5]  Joël Bertrand,et al.  Simulation of flow generated by an axial-flow impeller: Batch and continuous operation , 2004 .

[6]  F. Ein-Mozaffari,et al.  Using dynamic tests to study the continuous mixing of xanthan gum solutions , 2008 .

[7]  Enrique Galindo,et al.  A comparison of cavern development in mixing a yield stress fluid by rushton and intermig impellers , 1996 .

[8]  Catherine Xuereb,et al.  Determination of 3-D flow fields in agitated vessels by laser-Doppler velocimetry : Effect of impeller type and liquid viscosity on liquid flow patterns , 1996 .

[9]  Alvin W. Nienow,et al.  Estimation of Cavern Sizes in a Shear-Thinning Plastic Fluid Agitated by a Rushton Turbine Based on LDA Measurements , 1994 .

[10]  Sreenivas Jayanti,et al.  Mixing of power‐law fluids using anchors: Metzner‐Otto concept revisited , 2003 .

[11]  J. P. V. Doormaal,et al.  ENHANCEMENTS OF THE SIMPLE METHOD FOR PREDICTING INCOMPRESSIBLE FLUID FLOWS , 1984 .

[12]  C. André,et al.  Simulation of a Rushton Turbine Mixing Yield Stress Fluids: Application of the Metzner-Otto Concept , 1999 .

[13]  A. W. Nienow,et al.  CAVERN SIZES IN AGITATED FLUIDS WITH A YIELD STRESS , 1981 .

[14]  Yonggang Zhu,et al.  Impeller Geometry Effect on Velocity and Solids Suspension , 2001 .

[15]  Alvin W. Nienow,et al.  X-ray studies of cavern sizes and mixing performance with fluids possessing a yield stress , 1986 .

[16]  P. Mavros,et al.  Effect of Continuous Feed Stream and Agitator Type on CFSTR Mixing State , 2006 .

[17]  Guy A. Dumont,et al.  Identification of channelling and recirculation parameters of agitated pulp stock chests , 2005 .

[18]  Jie Wu,et al.  Energy efficiency study on axial flow impellers , 2006 .

[19]  Alvin W. Nienow,et al.  A study of an up‐ and a down‐pumping wide blade hydrofoil impeller: Part I. LDA measurements , 1998 .

[20]  Y. Hirata,et al.  Formation and growth of cavern in yield stress fluids agitated under baffled and non-baffled conditions , 1996 .

[21]  A. B. Metzner.  Agitation of non‐Newtonian fluids , 1957 .

[22]  Piero M. Armenante,et al.  Velocity profiles in a baffled vessel with single or double pitched-blade turbines , 1996 .

[23]  Farhad Ein-Mozaffari.  Macroscale mixing and dynamic behavior of agitated pulp stock chests , 2002 .

[24]  Philip K. Chan,et al.  Using electrical resistance tomography and computational fluid dynamics modeling to study the formation of cavern in the mixing of pseudoplastic fluids possessing yield stress , 2008 .

[25]  J. Bertrand,et al.  Investigation by laser doppler velocimetry of the effects of liquid flow rates and feed positions on the flow patterns induced in a stirred tank by an axial-flow impeller , 2002 .

[26]  A. Nienow,et al.  Mixing of Highly Viscous Simulated Xanthan Fermentation Broths with the Lightnin A‐315 Impeller , 1992 .

[27]  Alberto Brucato,et al.  Numerical prediction of flow fields in baffled stirred vessels: A comparison of alternative modelling approaches , 1998 .

[28]  Farhad Ein-Mozaffari,et al.  Using CFD and Ultrasonic velocimetry to Study the Mixing of Pseudoplastic Fluids with a Helical Ribbon Impeller , 2007 .

[29]  Alvin W. Nienow,et al.  A new mathematical model to predict cavern diameters in highly shear thinning, power law liquids using axial flow impellers , 1998 .

[30]  G. Dumont,et al.  Suspension yield stress and the dynamic response of agitated pulp chests , 2005 .

[31]  Catherine Xuereb,et al.  Effect of Axial Agitator Configuration (Up-Pumping, Down-Pumping, Reverse Rotation) on Flow Patterns Generated in Stirred Vessels , 2001 .

[32]  Alvin W. Nienow,et al.  An LDA study of the turbulent flow field in a baffled vessel agitated by an axial, down-pumping hydrofoil impeller , 1996 .

[33]  Sreenivas Jayanti,et al.  Mixing of pseudoplastic fluids using helical ribbon impellers , 2003 .

[34]  W. Kelly,et al.  Computational Fluid Dynamics Model for Predicting Flow of Viscous Fluids in a Large Fermentor with Hydrofoil Flow Impellers and Internal Cooling Coils , 1998, Biotechnology progress.

[35]  A. B. Metzner,et al.  Agitation of viscous Newtonian and non-Newtonian fluids , 1961 .

[36]  G. Zhou,et al.  Distribution of Energy Between Convective and Turbulent-Flow for 3 Frequently Used Impellers , 1996 .

[37]  Philippe A. Tanguy,et al.  Numerical investigation of the mixing efficiency of the Ekato Paravisc impeller , 2006 .

[38]  C. André,et al.  Power Consumption of a Rushton Turbine Mixing Viscous Newtonian and Shear‐thinning Fluids: Comparison between Experimental and Numerical Results , 1998 .

[39]  Pasi Moilanen,et al.  Modeling Aerated Fermenters with Computational Fluid Dynamics , 2006 .

[40]  Fernando J. Muzzio,et al.  Mixing of shear-thinning fluids with yield stress in stirred tanks , 2006 .

[41]  R. Byron Bird,et al.  The Rheology and Flow of Viscoplastic Materials , 1983 .

[42]  Guy A. Dumont,et al.  Dynamic modeling of agitated pulp stock chests , 2003 .

[43]  Farhad Ein-Mozaffari,et al.  Using computational fluid dynamics modeling and ultrasonic doppler velocimetry to study pulp suspension mixing , 2007 .

[44]  Leonardo C. Kammer,et al.  The Effect of Operating Conditions and Design Parameters on the Dynamic Behaviour of Agitated Pulp Stock Chests , 2008 .

[45]  Vivek V. Ranade,et al.  Computational snapshot of flow generated by axial impellers in baffled stirred vessels , 1996 .

[46]  Jyeshtharaj B. Joshi,et al.  Effect of Internals on the Flow Pattern and Mixing in Stirred Tanks , 2005 .

[47]  Serafim D. Vlaev,et al.  Pressure Distribution at Impeller Blades of Some Radial Flow Impellers in Saccharose and Xanthan Gum Solutions: A CFD Visualization Approach , 2004 .

[48]  Catherine Xuereb,et al.  Alternate Operating Methods for Improving the Performance of Continuous Stirred Tank Reactors , 2006 .

[49]  T Elson,et al.  THE GROWTH OF CAVERNS FORMED AROUND ROTATING IMPELLERS DURING THE MIXING OF A YIELD STRESS FLUID , 1990 .

[50]  Anders Rasmuson,et al.  The agitation of pulp suspensions with a jet nozzle agitator , 1998 .

[51]  W. Kelly,et al.  Using CFD to predict the behavior of power law fluids near axial-flow impellers operating in the transitional flow regime , 2003 .