Structural design and kinematics of a new parallel reconfigurable robot

Reconfigurable robots can be defined as a group of robots that can have different geometries, thus obtaining different structures derived from the basic one, having different degrees of freedom and workspaces. Thanks to the optimum dexterity they offer, the user can accomplish a large variety of industrial tasks, using a structurally optimized robot leading towards better energy control and efficiency especially in case of batch size production lines where the task (for the robot) may vary periodically. Reconfigurable systems are a challenge for numerous scientists, due to the advantage of dealing with changes and uncertainties on the ever-changing manufacturing market. One of the main problems of reconfigurable robots is the proper structural geometry determination, so that the resulting structure is able to perform a variety of tasks. This paper presents the structural design of an innovative parallel robot with six degrees of freedom and its proposed configurations with five, four, three and two degrees of freedom. The kinematic analysis and the workspace representations of all the presented configurations of the parallel robot, called Recrob, are also presented. Highlights? The importance of reconfigurable systems is explained. ? The structural design of a robot with up to six degrees of freedom is described. ? The kinematics of the reconfigurable robot is studied and a simulation is made. ? The reconfigurability of the parallel robot Recrob is explained. ? The workspace of all the configurations of the robot is studied.

[1]  Hongliang Qi,et al.  Topological design and genetic synthesis of the variable topology parallel mechanisms , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[2]  Sébastien Briot,et al.  Self-Motions of General 3- RPR Planar Parallel Robots , 2008, Int. J. Robotics Res..

[3]  Lili Zhang,et al.  Kinematics of a quadruped/biped reconfigurable walking robot with parallel leg mechanisms , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[4]  Giovanni Legnani,et al.  Performance analysis of a reconfigurable redundant parallel manipulator , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[5]  Ying Zhang,et al.  Software architecture for modular self-reconfigurable robots , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[6]  H. J. Franke,et al.  Requirement-oriented Configuration of Parallel Robotic Systems , 2007 .

[7]  Mark Yim,et al.  PolyBot: a modular reconfigurable robot , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[8]  Toru Omata,et al.  Dynamic and stable reconfiguration of self-reconfigurable planar parallel robots , 2004, Adv. Robotics.

[9]  Mark Moll,et al.  Modular Self-reconfigurable Robot Systems: Challenges and Opportunities for the Future , 2007 .

[10]  Antal Tiberiu Alexandru A NEW ALGORITHM FOR CYLINDRICAL WORM GEARS DIMENSIONING BASED ON THE HYDRODYNAMIC LUBRICATION CONDITIONS BETWEEN THE TEETH FLANKS , 2011 .

[11]  Xiaoqiang Tang,et al.  Structure design and task planning of reconfigurable Parallel Kinematic Machines system , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[12]  Juergen Hesselbach,et al.  Manipulator mit Parallelstruktur , 1997 .

[13]  Guilin Yang,et al.  Automatic Modeling for Modular Reconfigurable Robotic Systems: Theory and Practice , 2006 .

[14]  Dipl.-Ing. Nenad Pavlovic,et al.  SYSTEMATIC DEVELOPMENT OF ADAPTRONIC JOINTS FOR PARALLEL KINEMATIC STRUCTURES , 2006 .

[15]  Volkan Patoglu,et al.  Design of a reconfigurable force feedback ankle exoskeleton for physical therapy , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[16]  Gregory S. Chirikjian,et al.  Modular Self-Reconfigurable Robot Systems [Grand Challenges of Robotics] , 2007, IEEE Robotics & Automation Magazine.

[17]  Lihui Wang,et al.  Optimal design of reconfigurable parallel machining systems , 2009 .

[18]  Doru Talaba The angular capacity of spherical joints used in mechanisms with closed loops and multiple degrees of freedom , 2012 .

[19]  M. John D. Hayes Reconfigurable Planar Three-Legged Parallel Manipulators , 2010 .

[20]  Antal Tiberiu Alexandru Worm gears with optimized main geometrical parameters and their efficiency , 2010 .

[21]  Anjan Kumar Dash,et al.  Task-oriented configuration design for reconfigurable parallel manipulator systems , 2005, Int. J. Comput. Integr. Manuf..

[22]  S. Briot,et al.  Increase of Singularity-Free Zones in the Workspace of Parallel Manipulators Using Mechanisms of Variable Structure , 2008 .

[23]  Marco Ceccarelli,et al.  A Fairly General Algorithm to Evaluate Workspace Characteristics of Serial and Parallel Manipulators , 2008 .

[24]  Jens Kotlarski,et al.  Improving the Pose Accuracy of Planar Parallel Robots using Mechanisms of Variable Geometry , 2010 .

[25]  Dan Zhang,et al.  DEVELOPMENT OF RECONFIGURABLE PARALLEL KINEMATIC MACHINES USING MODULAR DESIGN APPROACH , 2011 .

[26]  David Inkermann,et al.  Dynamic Reconfiguration of Parallel Mechanisms , 2010 .

[27]  Raffaele Di Gregorio,et al.  Motion planning for a novel reconfigurable parallel manipulator with lockable revolute joints , 2010, 2010 IEEE International Conference on Robotics and Automation.

[28]  Doina Pisla,et al.  Kinematics and design of two variants of a reconfigurable parallel robot , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[29]  Nicolae Plitea,et al.  KINEMATICS, WORKSPACE AND SINGULARITY ANALYSIS OF A NEW RECONFIGURABLE PARALLEL ROBOT , 2011 .

[30]  Moshe Shoham,et al.  Stiffness Synthesis of a Variable Geometry Six-Degrees-of-Freedom Double Planar Parallel Robot , 2003, Int. J. Robotics Res..

[31]  Nicolae Plitea,et al.  Workspace and Singularity Analysis for a Reconfigurable Parallel Robot , 2010 .

[32]  Guilin Yang,et al.  Design and kinematic analysis of modular reconfigurable parallel robots , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[33]  S. Jack Hu,et al.  Forward Position Analysis of the 3-DOF Module of the TriVariant: A 5-DOF Reconfigurable Hybrid Robot , 2006 .

[34]  Marco Ceccarelli,et al.  A reconfigurable 5-DoF 5-SPU parallel platform , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[35]  C. Gosselin,et al.  Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms , 2004 .

[36]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .