Fabrication of high quality and low cost microlenses on a glass substrate by direct printing technique.

The fabrication of high quality and low cost microlenses on a glass substrate using a simple, rapid, and precise direct microplotting technique is shown in this paper. The fabrication method is based on the use of a microplotter system, which is significantly different from the existing inkjet, roll-to-roll printing, and reactive ion etching technology and could work with higher viscosity materials. By optimizing the parameters of voltage, dispense time, and concentration of the polymer solution, high quality microlenses with a diameter of 20 μm could be obtained. The geometrical and optical characteristics of the microlenses are analyzed by measurement of the surface profile and the imaging properties in the near-field and far-field zones as well as the diffraction pattern. We think that the fabricated microlenses could be attractive for enhancing the light extraction efficiency of light emitting diodes.

[1]  Hongping Zhao,et al.  Analysis of light extraction efficiency enhancement for thin-film-flip-chip InGaN quantum wells light-emitting diodes with GaN micro-domes. , 2012, Optics express.

[2]  M. Lagally,et al.  Polymer light emitting diodes and poly(di-n-octylfluorene) thin films as fabricated with a microfluidics applicator , 2006 .

[3]  Guo-Dung John Su,et al.  Fabrication of microlens arrays by a rolling process with soft polydimethylsiloxane molds , 2011 .

[4]  Johannes Schwider,et al.  Transferring resist microlenses into silicon by reactive ion etching , 1996 .

[5]  D. MacFarlane,et al.  Microjet fabrication of microlens arrays , 1994, IEEE Photonics Technology Letters.

[6]  Qing Yang,et al.  Maskless fabrication of concave microlens arrays on silica glasses by a femtosecond-laser-enhanced local wet etching method. , 2010, Optics express.

[7]  Hugo Thienpont,et al.  Plastic Microlens Arrays by Deep Lithography with Protons: Fabrication and Characterization , 2004 .

[8]  Properties of microlenses produced on a layer of tot'hema and eosin sensitized gelatin. , 2007, Applied optics.

[9]  Lens Design for Optical Head Compatible with Compact Disk and Digital Versatile Disk , 1998 .

[10]  Mahendra P. Kothiyal,et al.  Characterization of micro-lenses based on single interferogram analysis using Hilbert transformation , 2011 .

[11]  Yik-Khoon Ee,et al.  Enhancement of Light Extraction Efficiency of InGaN Quantum Wells LEDs Using SiO2 Microspheres , 2007, 2007 Conference on Lasers and Electro-Optics (CLEO).

[12]  P. Nussbaum,et al.  Design, fabrication and testing of microlens arrays for sensors and microsystems , 1997 .

[13]  Se-Guen Park,et al.  Fabrication of novel double microlens using two step soft lithography , 2010 .

[14]  Jong-Uk Bu,et al.  Fabrication of polymeric microlens of hemispherical shape using micromolding , 2002 .

[15]  Active-fiber star coupler that uses arrays of microlenses and liquid-crystal modulators. , 1992, Applied optics.