High temperature gas filtration with ceramic candles and ashes characterisation during steam–oxygen blown gasification of biomass

Abstract Two experimental campaigns were performed with the aim to study the effect of two different bed materials, magnesite and olivine during steam–O2 biomass gasification. The test-rig consists of a 100 kWth atmospheric circulating fluidized-bed gasifier and a high temperature filter unit which contains 3 rigid ceramic candles with an outer diameter of 60 mm, 10 mm wall thickness and a length of 1520 mm. Tests were performed with different fuels (A-wood, B-wood, miscanthus and straw). Two types of filter elements were used, Dia-Schumalith 1 (DS3) and Dia-Schumalith 1 N (DSN1), which operated at 800 °C for 58 h and 50 h, respectively. The filtration performance was studied through continuous observation of the increasing pressure drop during the build-up of the dust cake. Gas face velocities ranged between 2.5 and 5 cm s−1. DSN1 elements showed longer steady filtration compared to DS3 candles with filtration efficiencies equal to 100%. Formation of calcium and potassium silicates resulted from filter cake analyses. The filtration process influenced gas and tar composition of the incoming gas flow. Hydrogen content increased about 10% (dry basis) and the heavier tar compounds appeared to be broken into lighter chains, such as naphthalene whose concentration increased.

[1]  Heejoon Kim,et al.  The reduction and control technology of tar during biomass gasification/pyrolysis: An overview , 2008 .

[2]  M. Siedlecki,et al.  Biomass gasification as the first hot step in clean syngas production process – gas quality optimization and primary tar reduction measures in a 100 kW thermal input steam–oxygen blown CFB gasifier , 2011 .

[3]  Steffen Heidenreich,et al.  Filtration performance at high temperatures and analysis of ceramic filter elements during biomass gasification , 2011 .

[4]  Chunshan Li,et al.  Tar property, analysis, reforming mechanism and model for biomass gasification—An overview , 2009 .

[5]  K. Thambimuthu,et al.  A critical review of syngas cleaning technologies — fundamental limitations and practical problems , 2008 .

[6]  Xiaofeng Guan,et al.  Demonstration of hot gas filtration in advanced coal gasification system , 2008 .

[7]  Mikko Hupa,et al.  The ash chemistry in fluidised bed gasification of biomass fuels. Part I: predicting the chemistry of melting ashes and ash–bed material interaction , 2001 .

[8]  M. Alvin.  Advanced Ceramic Materials for Use in High-Temperature Particulate Removal Systems , 1996 .

[9]  Jin-do Chung,et al.  Filtration and dust cake experiment by ceramic candle filter in high temperature conditions , 2003 .

[10]  B. L. Krasnyi,et al.  Porous Permeable Ceramics for Filter Elements Cleaning Hot Gases from Dust , 2005 .

[11]  E. Lara‐Curzio,et al.  Microstructure and Fracture of Some SiC-based Clay Bonded Hot Gas Filter Materials After Exposure to Thermal Cycling and/or High Temperature Water Vapour , 2002 .

[12]  C. Wolters,et al.  SCHUMACHER HOT GAS FILTER LONG-TERM OPERATING EXPERIENCE in the NUON POWER BUGGENUM IGCC POWER PLANT , 2002 .

[13]  Arto Lehtovaara,et al.  Ceramic-filter behavior in gasification , 1993 .

[14]  Robert Mai,et al.  Operation Behavior of a Multi-Candle Filter with Coupled Pressure Pulse Recleaning during Normal Operation and in the Case of a Filter Candle Failure , 2002 .

[15]  T. Mäntylä,et al.  Environmental effects on microstructure and strength of SiC-based hot gas filters , 2001 .

[16]  Claes Brage,et al.  Use of amino phase adsorbent for biomass tar sampling and separation , 1997 .