Processing of Cf/SiC composites by hot pressing using polymer binders followed by polymer impregnation and pyrolysis

[1]  Hui Wang,et al.  Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests , 2019, Ceramics International.

[2]  M. Friess,et al.  Characterization and application of a novel low viscosity polysilazane for the manufacture of C- and SiC-fiber reinforced SiCN ceramic matrix composites by PIP process , 2019, Journal of the European Ceramic Society.

[3]  Xiang Zhu,et al.  Atomically thin SiC nanoparticles obtained via ultrasonic treatment to realize enhanced catalytic activity for the oxygen reduction reaction in both alkaline and acidic media , 2017 .

[4]  L. Rangaraj,et al.  Processing and characterization of Cf/ZrB2-SiC-ZrC composites produced at moderate pressure and temperature , 2017 .

[5]  Aijun Li,et al.  Microstructure and ablation mechanism of C/C–SiC composites , 2014 .

[6]  C. Varadachari,et al.  Thermodynamics and Oxidation Behaviour of Crystalline Silicon Carbide (3C) with Atomic Oxygen and Ozone , 2012 .

[7]  S. Dong,et al.  Fabrication and Properties of 3‐D Cf/SiC–ZrC Composites, Using ZrC Precursor and Polycarbosilane , 2012 .

[8]  V. V. B. Prasad,et al.  High temperature C/C–SiC composite by liquid silicon infiltration: a literature review , 2012, Bulletin of Materials Science.

[9]  D. Kim,et al.  Enhanced sintering of SiC using infiltration of preceramic polymer , 2011 .

[10]  Paolo Colombo,et al.  Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics , 2010 .

[11]  S. Dong,et al.  Preparation of C/SiC Composites by Hot Pressing, Using Different C Fiber Content as Reinforcement , 2006 .

[12]  M. Purdy,et al.  C/SiC Material Evaluation for Aircraft Brake Applications , 2006 .

[13]  W. Krenkel,et al.  C/C–SiC composites for space applications and advanced friction systems , 2005 .

[14]  Jiayu Xiao,et al.  Influence of an initial hot-press processing step on the mechanical properties of 3D-C/SiC composites fabricated via PIP , 2005 .

[15]  Z. Rak.  A Process for Cf/SiC Composites Using Liquid Polymer Infiltration , 2004 .

[16]  M. Z. Berbon,et al.  Effect of 1600°C Heat Treatment on C/SiC Composites Fabricated by Polymer Infiltration and Pyrolysis with Allylhydridopolycarbosilane , 2004 .

[17]  D. Van Wie,et al.  The hypersonic environment: Required operating conditions and design challenges , 2004 .

[18]  J. D. Wu,et al.  Preparation of thin films of carbon-based compounds , 2003 .

[19]  Pierre Delhaes,et al.  Chemical vapor deposition and infiltration processes of carbon materials , 2002 .

[20]  B. Riccardi,et al.  SiC–SiCf CMC manufacturing by hybrid CVI–PIP techniques: process optimisation , 2000 .

[21]  G. Ziegler,et al.  Fiber-reinforced composites with polymer-derived matrix: processing, matrix formation and properties , 1999 .

[22]  R. Naslain.  Materials design and processing of high temperature ceramic matrix composites: state of the art and future trends , 1999 .

[23]  D. Gonbeau,et al.  XPS study of BN thin films deposited by CVD on SiC plane substrates , 1990 .

[24]  J. Tsamopoulos,et al.  Densification of Porous Materials by Chemical Vapor Infiltration , 1989 .

[25]  H. Kayano,et al.  SiC sintered bodies with three-dimensional polycarbosilane as binder , 1976, Nature.