Thermal regulation of photovoltaic cladding

Abstract In the use of photovoltaic cladding for walls and roofs of buildings, the PV components can experience temperatures high enough to reduce the electrical output well below the rated value. It is shown that reductions in temperature of up to 20 K can be obtained by heat transfer to an air flow induced by buoyancy in a duct behind the PV component, with a significant increase in the electrical output and reduction of heat gain into the building. Practical PV roof installations have been implemented, on the basis of measurements with a full-scale roof specimen. A numerical model is used, which enables basic design data for PV walls and roofs to be obtained, such as the effects of the depth of the cooling duct on the thermal and electrical performance of the system. The model predictions are confirmed by measurements on a purpose-built test rig and simulations using CFD.

[1]  A. Bejan.  Convection Heat Transfer , 1984 .

[2]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[3]  Toshihiro Tsuji,et al.  Characteristics of a turbulent natural convection boundary layer along a vertical flat plate , 1988 .

[4]  R. H. Marshall,et al.  Validation of heat transfer coefficients on interior building surfaces using a real-sized indoor test cell , 1990 .

[5]  B. M. Cross.  Development, testing and first installations of an integrated solar roof system , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[6]  H.X. Yang,et al.  Validated simulation for thermal regulation of photovoltaic wall structures , 1996, Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996.