A Continuum Model for Void Nucleation by Inclusion Debonding

A cohesive zone model, taking full account of finite geometry changes, is used to provide a unified framework for describing the process of void nucleation from in­itial debonding through complete decohesion. A boundary value problem simulating a periodic array of rigid spherical inclusions in an isotropically hardening elastic-viscoplastic matrix is analyzed. Dimensional considerations introduce a characteristic length into the formulation and, depending on the ratio of this characteristic length to the inclusion radius, decohesion occurs either in a "ductile" or "brittle" manner. The effect of the triaxiality of the imposed stress state on nucleation is studied and the numerical results are related to the description of void nucleation within a phenomenological constitutive framework for progressively cavitating solids. 1 Introduction The nucleation of voids from inclusions and second phase particles plays a key role in limiting the ductility and toughness of plastically deforming solids, including structural metals and composites. The voids initiate either by inclusion cracking or by decohesion of the interface, but here attention is confined to consideration of void nucleation by interfacial decohesion. Theoretical descriptions of void nucleation from second phase particles have been developed based on both continuum and dislocation concepts, e.g., Brown and Stobbs (1971), Argon et al. (1975), Chang and Asaro (1978), Goods and Brown (1979), and Fisher and Gurland (1981). These models have focussed on critical conditions for separation and have not explicitly treated propagation of the debonded zone along the interface. Interface debonding problems have been treated within the context of continuum linear elasticity theory; for example, the problem of separation of a circular cylindrical in­clusion from a matrix has been solved for an interface that supports neither shearing nor tensile normal tractions (Keer et al., 1973). The growth of a void at a rigid inclusion has been analyzed by Taya and Patterson (1982), for a nonlinear viscous solid subject to overall uniaxial straining and with the strength of the interface neglected. The model introduced in this investigation is aimed at describing the evolution from initial debonding through com­plete separation and subsequent void growth within a unified framework. The formulation is a purely continuum one using a cohesive zone (Barenblatt, 1962; Dugdale, 1960) type model for the interface but with full account taken of finite geometry