Correction: Quenching and Partitioning (Q&P) Steel: Alloy Design, Phase Transformation and Evolution of Microstructure

[1]  S. Singh,et al.  Microstructure-property relationship in the quenching and partitioning (Q&P) steel , 2022, Materials Characterization.

[2]  S. Singh,et al.  An alternative quenching and partitioning (Q&P) process via spheroidization , 2022, Materials Characterization.

[3]  Sachin Kumar.  Quenching and partitioning (Q&P) process: a critical review of the competing reactions , 2022, Materials Science and Technology.

[4]  Sachin Kumar,et al.  Evolution of microstructure during the "quenching and partitioning (Q&P)" treatment , 2021 .

[5]  D. Chakrabarti,et al.  Understanding the effect of prior bainite/martensite on the formation of carbide-free bainite , 2020 .

[6]  Sarman Singh,et al.  Martensite Transformation During Continuous Cooling: Analysis of Dilatation Data , 2018, Metallurgical and Materials Transactions A.

[7]  J. Speer,et al.  Microstructural evolution during quenching and partitioning of 0.2C-1.5Mn-1.3Si steels with Cr or Ni additions , 2018, Acta Materialia.

[8]  P. Biswas,et al.  Analysis of the kinetics of bainite formation below the MS temperature , 2017 .

[9]  Seok-Jae Lee,et al.  Effect of Ni addition on the mechanical behavior of quenching and partitioning (Q&P) steel , 2017 .

[10]  G. Gao,et al.  Effect of bainitic transformation during BQ&P process on the mechanical properties in an ultrahigh strength Mn-Si-Cr-C steel , 2017 .

[11]  J. Sietsma,et al.  Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel , 2016 .

[12]  B. C. Cooman,et al.  Near-Ac3 austenitized ultra-fine-grained quenching and partitioning (Q&P) steel , 2016 .

[13]  H. Matsuda,et al.  Effect of Si on the acceleration of bainite transformation by pre-existing martensite , 2016 .

[14]  J. Speer,et al.  Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel , 2016 .

[15]  Yuri Estrin,et al.  Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel , 2016 .

[16]  B. C. Cooman,et al.  Modified Methodology for the Quench Temperature Selection in Quenching and Partitioning (Q&P) Processing of Steels , 2016, Metallurgical and Materials Transactions A.

[17]  D. Matlock,et al.  Prediction of tensile properties of intercritically annealed Al-containing 0.19C–4.5Mn (wt%) TRIP steels , 2016 .

[18]  M. Santofimia,et al.  Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite , 2016, Metallurgical and Materials Transactions A.

[19]  J. Sietsma,et al.  Effect of Prior Athermal Martensite on the Isothermal Transformation Kinetics Below Ms in a Low-C High-Si Steel , 2016, Metallurgical and Materials Transactions A.

[20]  S. Kundu,et al.  Formation of bainite below the MS temperature: Kinetics and crystallography , 2016 .

[21]  J. Sietsma,et al.  Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel , 2016 .

[22]  J. Speer,et al.  Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques , 2015 .

[23]  D. Raabe,et al.  Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation , 2015 .

[24]  Xianghua Liu,et al.  Comparison on mechanical properties and microstructure of a C–Mn–Si steel treated by quenching and partitioning (Q&P) and quenching and tempering (Q&T) processes , 2015 .

[25]  S. W. Thompson,et al.  Carbon Atom Re-Distribution during Quenching and Partitioning , 2014 .

[26]  G. Krauss,et al.  Atomic and nanoscale chemical and structural changes in quenched and tempered 4340 steel , 2014 .

[27]  Yang Ren,et al.  Micromechanical behavior of TRIP-assisted multiphase steels studied with in situ high-energy X-ray diffraction , 2014 .

[28]  G. Gao,et al.  Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: The great potential of ultrafine filmy retained austenite , 2014 .

[29]  J. Yang,et al.  Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel , 2014 .

[30]  B. C. Cooman,et al.  Application of Quenching and Partitioning (Q&P) Processing to Press Hardening Steel , 2014, Metallurgical and Materials Transactions A.

[31]  H. Matsuda,et al.  Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomograp , 2014 .

[32]  Sarman Singh,et al.  Development of Multiphase Microstructure with Bainite, Martensite, and Retained Austenite in a Co-Containing Steel Through Quenching and Partitioning (Q&P) Treatment , 2013, Metallurgical and Materials Transactions A.

[33]  Kyong-Su Park,et al.  Prediction of Martensite Start Temperature in Alloy Steels with Different Grain Sizes , 2013, Metallurgical and Materials Transactions A.

[34]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[35]  R. Kuziak,et al.  Third generation of AHSS with increased fraction of retained austenite for the automotive industry , 2012 .

[36]  S. V. van Bohemen,et al.  A physically based approach to model the incomplete bainitic transformation in high-Si steels , 2012 .

[37]  C. J. Tyne,et al.  A Kinetics Model for Martensite Transformation in Plain Carbon and Low-Alloyed Steels , 2012, Metallurgical and Materials Transactions A.

[38]  D. Matlock,et al.  Effect of Carbon and Manganese on the Quenching and Partitioning Response of CMnSi Steels , 2011 .

[39]  J. Sietsma,et al.  New low carbon Q&P steels containing film-like intercritical ferrite , 2010 .

[40]  H. Li,et al.  Microstructure and Mechanical Properties of an Ultrahigh-Strength 40SiMnNiCr Steel during the One-Step Quenching and Partitioning Process , 2010 .

[41]  H. K. D. H. Bhadeshia,et al.  Austenite grain size and the martensite-start temperature , 2009 .

[42]  Ondrej Muránsky,et al.  In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures , 2008 .

[43]  J. Speer,et al.  Effect of Retained Austenite Stabilized via Quench and Partitioning on the Strain Hardening of Martensitic Steels , 2008 .

[44]  Jonathan P. Wright,et al.  Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels , 2007 .

[45]  Zhong-qin Lin,et al.  A model for strain-induced martensitic transformation of TRIP steel with strain rate , 2007 .

[46]  M. Strangwood,et al.  Characterisation of bimodal grain structures in HSLA steels , 2007 .

[47]  E. Pereloma,et al.  Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels , 2007 .

[48]  Jonathan P. Wright,et al.  Martensitic transformation of individual grains in low-alloyed TRIP steels , 2007 .

[49]  D. Matlock,et al.  Quenching and partitioning martensite-a novel steel heat treatment , 2006 .

[50]  K. Sugimoto,et al.  Effects of Nb and Mo Addition to 0.2%C-1.5%Si-1.5%Mn Steel on Mechanical Properties of Hot Rolled TRIP-aided Steel Sheets , 2004 .

[51]  D. Matlock,et al.  Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation , 2004 .

[52]  T. Sourmail,et al.  Stability of retained austenite in TRIP-assisted steels , 2004 .

[53]  F. Delannay,et al.  On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels , 2001 .

[54]  B. C. De Cooman,et al.  Galvanizability of high-strength steels for automotive applications , 2001 .

[55]  S. Zwaag,et al.  Stabilization mechanisms of retained austenite in transformation-induced plasticity steel , 2001 .

[56]  R. W. Reed,et al.  Stress induced transformation to bainite in Fe–Cr–Mo–C pressure vessel steel , 1991 .

[57]  H. K. D. H. Bhadeshia,et al.  Bainite in silicon steels: New composition–property approach Part 1 , 1983 .

[58]  H. K. D. H. Bhadeshia,et al.  The mechanism of bainite formation in steels , 1980 .

[59]  H. Bhadeshia.  The lower bainite transformation and the significance of carbide precipitation , 1980 .

[60]  B. C. Cooman,et al.  Application of Quenching and Partitioning Processing to Medium Mn Steel , 2014, Metallurgical and Materials Transactions A.

[61]  M. Sandhyarani,et al.  Estimation of Crystallite Size, Lattice Strain and Dislocation Density of Nanocrystalline Carbonate Substituted Hydroxyapatite by X-ray Peak Variance Analysis☆ , 2014 .

[62]  D. Matlock,et al.  Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment , 2008 .

[63]  J. Ågren,et al.  Reply to comments on “On the definition of paraequilibrium and orthoequilibrium” , 2005 .

[64]  K. Iijima.  The Effect of Austenitizing Conditions on the Mechanical Properties and on Hardenability of Hardened Carbon Steel , 1963 .

[65]  D. P. Koistinen,et al.  A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels , 1959 .

[66]  G. K. Williamson,et al.  III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum , 1956 .