Phase and Microstructure Evolution and Toughening Mechanism of a Hierarchical Architectured Al2O3–Y2O3 Coating under High Temperature

[1]  Jiecai Han,et al.  Bioinspired high toughness graphene/ZrB2 hybrid composites with hierarchical architectures spanning several length scales , 2016 .

[2]  Chenguang Liu,et al.  Study on erosion–wear behavior and mechanism of plasma-sprayed alumina-based coatings by a novel slurry injection method , 2016 .

[3]  R. Ritchie,et al.  Bioinspired Hydroxyapatite/Poly(methyl methacrylate) Composite with a Nacre‐Mimetic Architecture by a Bidirectional Freezing Method , 2016, Advanced materials.

[4]  S. Sampath,et al.  Bioinspired Hybrid Materials from Spray‐Formed Ceramic Templates , 2015, Advanced materials.

[5]  Yanchun Zhou,et al.  Preparation, mechanical, and thermal properties of a promising thermal barrier material: Y4Al2O9 , 2015, Journal of Advanced Ceramics.

[6]  Y. Bykov,et al.  Effect of Microwave Heating on the Mass Transfer, Phase Formation, and Microstructural Transformations in the Y2O3–Al2O3 Diffusion Couple , 2014, Powder Metallurgy and Metal Ceramics.

[7]  Adam J. Stevenson,et al.  Strong, tough and stiff bioinspired ceramics from brittle constituents. , 2014, Nature materials.

[8]  Shi Feng,et al.  In situ fabrication of highly-dense Al2O3/YAG nanoeutectic composite ceramics by a modified laser surface processing , 2014 .

[9]  P. Mechnich,et al.  Air plasma-sprayed Y2O3 coatings for Al2O3/Al2O3 ceramic matrix composites , 2013 .

[10]  Chenguang Liu,et al.  Sliding Wear Performance of Plasma-Sprayed Al2O3-Cr2O3 Composite Coatings Against Graphite under Severe Conditions , 2013, Journal of Thermal Spray Technology.

[11]  B. Liu,et al.  Theoretical Prediction of Elastic Stiffness and Minimum Lattice Thermal Conductivity of Y3Al5O12, YAlO3 and Y4Al2O9 , 2012 .

[12]  Jingwei Feng,et al.  In-situ formed γ-Al2O3 nanocrystals repaired and toughened Al2O3 coating prepared by plasma spraying , 2012 .

[13]  André R Studart,et al.  Composites Reinforced in Three Dimensions by Using Low Magnetic Fields , 2012, Science.

[14]  Kai-Ts'ung Yang,et al.  Microstructure and mechanical properties of Al2O3–Cr2O3 composite coatings produced by atmospheric plasma spraying , 2011 .

[15]  Ch Lai,et al.  Size ratio induced yttrium aluminum garnet formation characteristics in nano-scaled Y2O3–Al2O3 powder systems via fast firing processes , 2011 .

[16]  C. Ding,et al.  Preparation and characterization of plasma-sprayed Al/Al2O3 composite coating , 2008 .

[17]  L. Shi,et al.  Effect of La2O3 on microstructure and sliding wear properties of TiC4 ceramic coating produced by electrical discharge method , 2007 .

[18]  R. Krishnamurthy,et al.  Evaluation of fracture toughness of as plasma sprayed alumina–13 wt.% titania coatings by micro-indentation techniques , 2006 .

[19]  S. Sasaki,et al.  Tribological characteristics of low-pressure plasma-sprayed A12O3 coating from room temperature to 800 °C , 2005 .

[20]  C. Berndt,et al.  Alumina-base plasma-sprayed materials—Part II: Phase transformations in aluminas , 1997 .

[21]  A. Lejus,et al.  Metastable phases in yttrium oxide plasma spray deposits and their effect on coating properties , 1993 .

[22]  Kevin Kendall,et al.  A Simple Way to Make Tough Ceramics. , 1991 .

[23]  R. Mcpherson.  Formation of metastable phases in flame- and plasma-prepared alumina , 1973 .

[24]  R. Mcpherson.  Formation of metastable phases in flame- and plasma-prepared alumina , 1973 .